Used Gildemeister Mf 65 for sale (8,715)

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Lsdewym Nfepfx Ab Uort Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling Lodpfx Abszxhmas Uort - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Ljdpfxoyz Sdqj Ab Usrt Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. * Lrodpfx Aboyzyudo Uet

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor Lsdpfxszd Tcwe Ab Uort Parts catcher CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Lrsdpfsy Hppzex Ab Ujt Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Turret w/8 stations Control: Siemens Sinumerik 840 C Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem Lodpoqn A Rnefx Ab Usrt chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable Lrjdpfx Aoyaqr Ajb Uet • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: used, Year of construction: 1999, Technical details: turning diameter: 200 mm turning length: 600 mm capacity X-axis: 190 mm capacity Z-axis: 555 mm double spindle units: spindle distance: 800 mm spindle drive: Links (40/100%ED): 18/14 kW spindle turning speed range: 31-6300 U/min spindle drive: Rechts (40/100%ED): 18/14 kW spindle turning speed range: 31-6300 U/min speeds of tool: 2x12 Werkzeuge: 7/5 KW, 40-4200 U/min dimensions of the machine ca.: 5,032 x 3,048 x 2,445 m weight of the machine ca.: 6500 Kg Lsdpfxez A Ands Ab Usrt Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 650 mm, turning diameter: 250 mm, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, CNC lathe Gildemeister Twin 65Y RG2 Year of manufacture: 2003 Control system: Siemens 840D Type: CNC twin-spindle turning center Main/counter spindle: Yes Turret: 2 × 12 stations Tool holder: VDI 30 Driven tools: Yes Y-axis: Yes (upper turret) C-axes: Main and counter spindle Working area Characteristic Value Max. turning diameter: 250 mm Max. turning length: 650 mm Max. turning diameter over the bed: approx. 340 mm Bar passage: 65 mm Main spindle Characteristic Value Speed: 20–5,000 min⁻¹ Ledpfx Abszl Dy Ns Uert Power: 35 kW Torque: 370 Nm C-axis: 0.001° Counter spindle Characteristic Value Speed: 20–5,000 min⁻¹ Power: 35 kW Torque: up to 370 Nm Bar passage: 65 mm C-axis: 0.001° Travel paths Axis Value X1: 300 mm Z1: 650 mm Y: 80 mm (±40 mm) X2: 180 mm Z2: 650 mm Tool turret Number of stations: 12 + 12 Tool holder: VDI 30 Driven tools: 4,000 min⁻¹ Power of tool drive: 11 kW Torque of tool drive: 28 Nm Chip conveyor High-pressure pump Bar loader magazine, manufacturer IRCO, type SiMag 42

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm Ledpfxsyvz Ibj Ab Ujrt • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar

Condition: used, General Machine Data Manufacturer: GILDEMEISTER Model: GDS 65 Machine Type: CNC turning machine Year of Manufacture: 1990 Control System: GILDEMEISTER CNC Working Area Max. Turning Diameter: 290 mm Max. Turning Length: 450 mm Swing Diameter over Bed: 600 mm Turning Diameter over Slide: 185 mm Main Spindle Spindle Bore: 65 mm Max. Spindle Speed: 3,000 rpm Axes and Travels Travel in X-axis: 190 mm Travel in Z-axis: 450 mm Tool Turret Number of Tool Turrets: 1 Number of Tool Stations: 12 Tool Holder: VDI 40 Electrical Data Total Power Consumption: approx. 45 kW Lodpfxezklz Ss Ab Uert Machine Dimensions and Weight Machine Dimensions (L × W × H): approx. 4,500 × 2,500 × 2,300 mm Machine Weight: approx. 4,700 kg

Condition: good (used), Year of construction: 2007, operating hours: 49,000 h, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Ljdpfxjxdih Ne Ab Uort

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Lrsdpfxjq T I Izo Ab Uet Please note that the machine is sold without chucks, as these remain with the seller!

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Lredpfx Ajyln Eksb Ujt

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 Lsdpfx Absqn A Rgs Uort frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister CTX 320 V5 Year of manufacture 2004 Condition: Used Control system: Siemens 840 D ShopTurn Ledpfezh Ewhox Ab Uert Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Accessories/Equipment Chip conveyor Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- --Errors and prior sale excepted--

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Ledpfjz A Tbujx Ab Usrt Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: used, Year of construction: 2007, Number of working hours 20456 h spindle hours 75180 h control FANUC 310 i chuck diameter 175 mm turning speeds 5.000 min-1 weight of the machine ca. 8800 kg dimensions of the machine ca. 4500 x 1990 x 2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Ljdpfsydfq Ijx Ab Uort Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: used, Year of construction: 2008, bar material dia. 65 mm turning speeds 5.000 min-1 Number of working hours 34979 h spindle hours 72260 h control FANUC 310 i weight of the machine ca. 8800 kg dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Lredsyat Hvspfx Ab Ujt Translated with (free version)

Year of construction: 2002, condition: ready for operation (used), Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h. Lrsdpfxstufbyo Ab Ujt

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Lodpoy Nyg Ajfx Ab Uert Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Lodpfx Asy Nyrxsb Uert Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Ljdpoyamflefx Ab Uert Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. Ljdpozd R S Aofx Ab Uort MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Flood Coolant Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm ELECTRICAL: Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg