Used Iemca Maestro 80/37/Up Ll for sale (45,123)

Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY - Supply voltage : 230 / 400 [V] - Total installed power : 3 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] Ndsdpfx Aewa D Skoiysa - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 022115SB01, bar length: 3,300 mm, total length: 4,292 mm, total width: 1,196 mm, total height: 1,730 mm, overall weight: 2,130 kg, It was fitted to the Biglia B620 (with a spindle length of 1150 mm) – 71 mm guide channels – 70.5 mm bar pusher – 9 bushings (6-20-26-28-32-42-46-52-58 mm). Ndjdpjzg Eu Rofx Aiyja

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 Ndodpfx Aisx Suzaoyja * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, TECHNICAL DETAILS - Bar diameter : 8 - 80 [mm] - Bar length : 3300 [mm] Ndodpfxsw U Eu Io Aiyoa POWER SUPPLY - Supply voltage : 230 / 400 [V]

Condition: good (used), Year of construction: 2007, operating hours: 22,037 h, load capacity: 8,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, Linde H80D/900-03 Duplo 370 Sideshift / Fork Positioner, 6-cylinder Diesel, 2007 Video can be sent via WhatsApp. Continuous stock available, see our website. Prices are ex Nuland. Van de Wert Trading B.V. offers a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always on site. Ndodpfxjynh A Uo Aiyea Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Nsdpfx Aiezf Nb Eoyjda

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Ndodey N R Ttspfx Aiyoa

Condition: used, TECHNICAL DETAILS - Bar diameter : Ø 5 à 80 [mm] - Bar length : 250 à 1615 mm [mm] - Supply voltage : 400 [V] - Machine weight : 500 [kg] Nsdpfx Asv R Hw Soiyoda

Condition: refurbished (used), Year of construction: 2009, operating hours: 3,129 h, functionality: fully functional, machine/vehicle number: 020913QA04, control type: manual, actuation type: electric, bar length: 8,000 mm, type of input current: AC, KID 80 TYPE 16 BAR FEEDER, serial number 020913QA04 – 500KG. Year 2009 – EU 400 V 3 – 50 HZ – 3.5A – 5 KA – 806sb10001 – 000si03400. Ndodpfx Aioznm E Tjyea

Condition: excellent (used), functionality: fully functional, bar length: 1,615 mm, bar diameter (max.): 80 mm, reverse speed: 1,000 mm/s, overall weight: 580 kg, workpiece weight (max.): 250 kg, The bar feeder was purchased in 2019 and was connected to a DMG Mori NLX 2500 / 700. The bar feeder was hardly used. TECHNICAL DETAILS Connector: Harting Material Cross-Sections Round: 5 to 80 mm Square: 5 to 50 mm Hexagonal: 5 to 60 mm Bar Lengths Bar length: 500 to 1,615 mm Short bar length: 90 to 500 mm Performance Data Magazine capacity: 250 kg Bar changeover time: 30 s Feed rate: 0 to 500 mm/s Return speed: 1,000 mm/s Njdpoy A Rlpsfx Aiyjda MACHINE DETAILS Connection voltage: 230/400 V Control voltage: 24 V Power consumption: 2 kW Dimensions & Weight Weight: 580 kg Bar pusher travel: max. 1,710 mm Loading axis height: 905 to 1,252 mm EQUIPMENT Short bar kit Handheld control unit Remote control Safety covering Fixed protective grilles

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm Nedpfjx D Rvnjx Aiyjda • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets

Condition: good (used), functionality: fully functional, -KOM 3163- Offered here is a lifting crane from Abus. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and the hook block. Dimensions can be found in the last picture. You will receive the inspection logbook upon purchase. Nodexcnxqjpfx Aiyeda Unfortunately, the nameplate is no longer available.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 15,989 h, load capacity: 8,000 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,710 mm, power: 74 kW (100.61 HP), empty load weight: 12,500 kg, drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Nodpfszuh Nyex Aiyeda Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: LINDE H80D diesel forklift. Lifting capacity - - - Year of manufacture 2001 - - - 15,989 operating hours according to display - - - FORK ADJUSTER - - - Side shifter - - - Duplex free-lift mast - - - Overall height 2.71m - - - Lifting height 3.15m - - - 6-cylinder DEUTZ diesel engine TURBO, approx. 100 hp - - - Twin tires - - - Full cabin - - - Double pedal design - - - Fork length 1.80m - - - Fork carriage width 2.30m - - - all mechanical - - very good tires Side shifter, fork adjuster, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin.

Condition: good (used), Year of construction: 2007, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, injection pressure: 1,390 bar, injection weight: 168 g, mold height (min.): 250 mm, ejector stroke: 150 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 ccm Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Ndjdpfozt In Tjx Aiysa Ejector stroke: 150 mm Weight: 3180 kg Control system: Selogica Equipment: 2 x hydraulic core 5 heating zones for the mold Rotameter

Condition: used, Year of construction: 2006, Rod diameter: 8 mm to 65 mm (round stock) Rod length (33L): approximately 3.3 meters Machine type: Fixed spindle head (automatic lathe) Nodpozp Ipcsfx Aiyjda Magazine type: MP magazine (multi-magazine)

Condition: used, TECHNICAL DETAILS - Bar diameter : 12 maxi [mm] - Bar length : 3200 [mm] - Pushcart diameter : 10.2 [mm] - Channel diameter : 12 [mm] - Supply voltage : 400 [V] Ndjdpfjuhbl Hex Aiyea - Machine weight : 600 [kg]

Condition: used, TECHNICAL DETAILS - Bar diameter : 3-20 [mm] Nsdpfx Aijwpl Aijyjda - Bar length : 4000 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 5 - 51 [mm] - Bar length : 3200 [mm] POWER SUPPLY Nedpfx Ajyigfhjiyeda - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg]

Condition: used, TECHNICAL DETAILS - Bar diameter : 8 - 80 [mm] - Bar length : 3300 [mm] POWER SUPPLY Nedpjzkmduefx Aiyoda - Supply voltage : 230 / 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 23 [mm] - Bar length : 3200 [mm] POWER SUPPLY Ndodpfx Aszr Ruteiysa - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg] EQUIPMENT - Channel diameter : 24 [mm] - Pushcart diameter : 23 [mm]

Condition: used, Year of construction: 2006, machine/vehicle number: 020650SA07, Short bar loader, maximum length 2100 mm, minimum/maximum diameter 8-80 mm. Two kits included: 46-66 mm guide channels / 45-65 mm bar pushers. It was fitted to a Tsugami MO8SYE machine. Ndodpfxjzqnhhs Aiyoa

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) Ndsdpszk E Irefx Aiyea including guide channels: Ø 46 + 66 mm

Condition: new, Brand-new electric actuator from the renowned German company AUMA. Professional device designed for industrial automation, operation of sluice gates, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 protection rating. Drive nameplate data: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection rating: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Motor nameplate data: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 Ndjdjy Skm Ejpfx Aiysa • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Duty type: S4 – 25% ED 1200 c/h • Protection rating: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Applications: • Industrial automation • Industrial fittings • Sluice gates and dampers • Water supply installations • Power engineering • Technological systems Condition: new / warehouse The price is for one piece.

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 Njdpfxewv Trle Aiyjda 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: good (used), Year of construction: 2011, operating hours: 12,400 h, Forklift LINDE H80D-01 duplo415 SIDESHIFT/FORK POSITIONER DEUTZ DIESEL 2011 Video can be sent via Whatsapp. Ndodpjyrdrajfx Aiyea Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland