Automatic bar feeder

Iemca Kid 80

Condition: used, TECHNICAL DETAILS - Bar diameter : Ø 5 à 80 [mm] - Bar length : 250 à 1615 mm [mm] - Supply voltage : 400 [V] - Machine weight : 500 [kg] Hsdpfjv R Hw Sox Abhsp

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Parts conveyor Magazine Hodsydmbujpfx Abhsp Further details on request

Condition: excellent (used), functionality: fully functional, bar length: 1,615 mm, bar diameter (max.): 80 mm, reverse speed: 1,000 mm/s, overall weight: 580 kg, workpiece weight (max.): 250 kg, The bar feeder was purchased in 2019 and was connected to a DMG Mori NLX 2500 / 700. The bar feeder was hardly used. TECHNICAL DETAILS Hodjy A Rlpopfx Abhsp Connector: Harting Material Cross-Sections Round: 5 to 80 mm Square: 5 to 50 mm Hexagonal: 5 to 60 mm Bar Lengths Bar length: 500 to 1,615 mm Short bar length: 90 to 500 mm Performance Data Magazine capacity: 250 kg Bar changeover time: 30 s Feed rate: 0 to 500 mm/s Return speed: 1,000 mm/s MACHINE DETAILS Connection voltage: 230/400 V Control voltage: 24 V Power consumption: 2 kW Dimensions & Weight Weight: 580 kg Bar pusher travel: max. 1,710 mm Loading axis height: 905 to 1,252 mm EQUIPMENT Short bar kit Handheld control unit Remote control Safety covering Fixed protective grilles

Condition: used, Year of construction: 2011, turning diameter 160 mm Hodpfx Aboyuzfpshsp turning length 550 mm control Siemens weight of the machine ca. 9000 kg

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) Hsdjfbt Siepfx Abhjp • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light Hjdpfx Abjrmkfnehsp - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA Hedpfx Abev S Su Sshop - Model: LT 200-M TwinStar - Year of manufacture: 2006

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Hjdpfx Abeht Rl Ejhsp Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T Hodpfev Tvkaox Abhsp YOM: 2004-11 approximately 20 pcs tools Mazak Flex-GL200F More information is coming soon.

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Hjdpfxjh Uqpvo Abhjp Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!