Used Igm Rte 497-S for sale (69,117)

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Bwedpfx Abowc A Rdotjt

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips Bjdpfx Aezbvy Isbtewt

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal Bodpfx Absy Sixtjtowt - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: used, 14 compartments, approx. 2000 kg per compartment. Support depth: 200 mm per compartment. Width: 6713 mm. Depth: 4200 mm. Bwjdexcv Akjpfx Abtet Height: 2955 mm.

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass Bjdpfsxtfv Isx Abtjwt - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Bwodpjin Ewljfx Abtot Please contact us! We will be happy to advise you.

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Bwjdpfx Aey Aa Ugebtst Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Bwedpfxexlt Hfj Abtet Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: new, empty load weight: 1,067 kg, maximum load weight: 2,433 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,970 mm, loading space width: 2,030 mm, loading space height: 2,060 mm, loading space volume: 21 m³, color: black, construction height: 2,370 mm, working width: 2,350 mm, Hydraulics, automatic reverse, hot-dip galvanized, unbraked, stand rail extension by 11cm / electric winch inside, * IMMEDIATELY AVAILABLE * incl. Stand rail extension by 11cm / electric winch inside Technical data: - Make: Debon - Model: Roadster C1000 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 497 x 203 x 206 cm - External dimensions (L x W x H): 625 x 235 x 237 cm - Loading height of floor: 35 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,067 kg - Payload: 2,433 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/50R13C - Chassis: Pullman2 coil spring - Support wheel: Yes, automatic - 100km/h approval: Yes EQUIPMENT - Brakes: Yes - Number of axles: 2 - Floor: Aluminum floor - Walls material: Composite (honeycomb core) - Roof material: Full polyester - Through-loading height: 205 cm - Through-loading width: 190 cm - Colour: Black - Number of pallet spaces: 10 - Tipping / lowering function: None - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: Plastic mudguards - Side door: Yes - Side flap: Yes - Rear doors / tailgate: Tailgate - Rear door / tailgate material: Aluminium - Locks box body: Angle lever locks - Drive-on angle: approx. 10 - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: 8 - Interior light: Yes, rear - Rear lighting: Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear top position lights - Plug for lighting: 13-pin - Vehicle documents: COC documents Standard equipment: - Double-walled and anodized aluminium drop sides - Anodized aluminium floor - Full poly roof and front in color - Interior continuous height: approx. 200cm - Continuous width inside: approx. 191cm - Drive-on flap made of aluminum with optional lock lockable, (reinforcement of the tailgate by T-beam) - Side flap, lockable, on each side, opening dimensions: 2380 x 1330 mm W.H., quick access to your vehicle and optimum presentation option - side door on each side, lockable - width in the interior between the mudguards 1910 mm - height of the side wall (cannot be opened) measured from the floor: 290 mm - height of the side wall (cannot be opened) measured from the stand rails: 180 mm - running rails inside the box trailer - left and right, with perforated grid - length of the stand rails: 4030 mm - height of the stand rails measured from the floor: 110 mm - incl. electric cable winch Electric cable winch - Incl. hand-held remote control with cable - Incl. 12V battery on the loading area - lashing eyes mounted on the floor - interior lights - torsion-resistant chassis - stable cross members for high point loading - PULLMAN V2 chassis independent suspension with trailing arm, coil spring and shock absorber, lowered with very low centre of gravity and galvanized - 100 km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing lights - large rear lights - rear view mirror - rear view mirror - large rear view mirror - rear view mirror - rear view mirror. plug - reversing lights - large safety lights - integrated rear fog light - automatic center support wheel New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, De Bwsdeu Htn Tepfx Abtet

Condition: used, machine/vehicle number: 008521, Max. panel width: 1000 mm Max. panel length: 2400 mm Bedpfx Abjzruyaotewt

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Bwedpfxoyffqqj Abtet Price negotiable.

Condition: new, Application - Alkali/acid concentration control - phase separation in pipe systems - monitoring and control of bottle cleaning systems - product monitoring in breweries, dairies and the beverage industry - CIP system control Measurement range 100 µS/cm - 2000 mS/cm Process temperature Bwedpfxjh Ruk Io Abtjt max. 140°C (max. 30 min.) 284°F (max. 30 min.) Process pressure max. 12 bar (90°C) (174 psi(194°F))

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Bwsdpfx Asywadwjbtjt Max feed speed: 40 m/min

Condition: excellent (used), Year of construction: 2010, Assembly line for cabinet bodies, consisting of: The Ligmatech press can be sold separately and was manufactured in 2010; the rest of the system was manufactured in 1996. Pos. 1: Assembly table with conveyor belt 2500*800mm and small parts shelf Pos. 2: Roller conveyor approx. 6000*800 Pos. 3: Glue application station for cabinet body sides with 1 glue gun Pos. 4: Roller conveyor approx. 4000x800mm Pos. 5: Cabinet body lowering station approx. 3000*800; adjustable from working height of 850mm to 300mm Pos. 6: Ligmatech cabinet body press MPH 510/25/09/S Profiline, manufactured in 2010 with automatic infeed and outfeed of cabinet bodies (belt conveyor), safety light curtain at the front Machine data: for cabinet bodies with Length: 250-2500 mm Width: 250-1000 mm Height: 150 -1400 mm Pressing force: 14 KN Positioning speed: 25 mm/s Working height: 300 mm Space requirement: 4000 x 750 x 2300 mm Weight: 2200 kg Pos. 7: Cabinet body uprighting station approx. 3000*800mm Bwedpjzi N Rujfx Abtst Pos. 8: Belt conveyor 4000*800 Pos. 9: Cabinet body discharge station 1200*800mm Pos. 10: Cabinet body assembly station, height-adjustable, with belt conveyor 4000*800

Year of construction: 1969, condition: ready for operation (used), A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of manufacture: 2004, max. press force: 6300kN, slide stroke: 240mm, strokes: 40/min, max. slide adjustment: 100mm, max. shut height: 525mm, table dimensions X/Y: 1200mm/1500mm, slide dimensions X/Y: 1050mm/1100mm, main motor power: 110kW, weight: approx. 110t. 3) Decoiler Roland Dreher 2398 G-SP, year of manufacture: 2004, max. load capacity: 25500kg, max. strip width: 1050mm, coil inner diameter range: 475mm-615mm, max. coil outer diameter: 2000mm. 4) Straightening feeder Roland Dreher 1689 G-SP, year of manufacture: 2004, strip width range: 100mm-1050mm, max. strip thickness: 12.4mm, max. strip cross-section: 6000mm², straightening rolls: 6, straightening roll diameter: 100mm, infeed and outfeed rolls: 4, diameter: 140mm, max. feed speed: 50m/min, feed accuracy: 0.1mm, transverse travel: +/-400mm. 5) Transfer feeder Roland Dreher 700/160/50, year of manufacture: 1994, feed length: 700mm, closing stroke: 160mm, lifting stroke range: 0mm-50mm, max. rail spacing: 1190mm, strokes: 24/min. 6) Central component oiling and processing system Leblein, control system: Siemens S7-300. 7) Line control system and electrical cabinet Siemens S7-317 with two decentralized Siemens ET200M units, modernization year: 2011. Including additional peripheral equipment such as feeding, marking, hydraulics, conveying, etc. Documentation available. An on-site inspection is possible. Bwjdpfxozl U H Ts Abtet

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Bwedpfey Ur Hlsx Abtjt Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Bwedpsxlkq Usfx Abtst Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, planing width: 330 mm, rotational speed (max.): 9,000 rpm, total width: 615 mm, total height: 555 mm, total length: 850 mm, chip removal: 3 mm, height adjustment type: mechanical, number of feed rollers: 1, number of planer blades: 36, planing height: 156 mm, PS33 with spiral shaft • Innovative design and powerful motor. • Chip removal of up to 3.2m. • IN & OUT TABLE. • Double knife cylinder with double-sided knives. • Indicator shows the material removal on the front of the machine. • Planer shaft with reversible knife • No extraction system required thanks to integrated fan to remove sawdust from the planer cylinder • Depth stop with seven positions for repeated thickness planing at the same height • Maximum part width up to 330 mm • Type: PS33 • Recommended use: Craftsmen • Input power (230 V): 1.8 kW • Planer shaft speed: 9,000 rpm. • Planer shaft diameter: 46 mm • Number of reversible plates in planer shaft: 36 pieces • Reversible plate size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min. • Max. material removal: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Extraction: integrated fan, 62 mm suction nozzle or fabric bag • Noise level: 96 dB • Machine dimensions (length x width x height): 340 x 615 x 555 mm • Machine dimensions with tables unfolded (length x width x height): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (length x width x height): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide inserts (in the planer shaft) • 5 replacement carbide inserts and screws • Waste bag for sawdust and Dust • Connection set for waste bags Bedpfsvncu Iox Abtowt • Torx key for changing the inserts (TX25)

Condition: new, connected load frequency 230 V Bwedpsynnkrefx Abtot battery 24V / 200Ah Brush diameter 510 mm tank capacity 50 / 50 Liter weight 90 kg range L-W-H 1,0 x 0,6 x 1,0 mm RTE Floor Cleaning Machine: - with drive system - battery charger - working capacity 2000 m²/h - suction width: 850 mm - cleaning width: 510 mm - fresh/wastewater tank volume: 55/60 L

Condition: new, working width 1250 mm working area: 6400 m²/Std. tank capacity Wasser 10l l 0 80 l weight of the machine ca. 0,45 t Bwedpfoyrhu Ejx Abtot dimensions of the machine ca. 1,6 x 1,2 x 1,3 m Sweeper - with charger - 2 x 400mm side brushes - incl. water tank

Condition: used, mileage: 69,000 km, power: 62 kW (84.30 HP), first registration: 09/2014, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Please, no emails / no emails. Due to time constraints, we are unable to respond to them. Thank you for your understanding! VAT can be shown separately. Net selling price: €6,715.00 ---- Opening hours and further information: We have Volkswagen T5 Transporter 1.9 TDI + 2.0 TDI models in stock. Inspection and purchase possible without prior appointment: Inspection and purchase possible without prior appointment: No appointment necessary! We have Volkswagen T5 Transporter 1.9 TDI models in stock. Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Please, no emails / no emails. Due to time constraints, we are unable to respond to them. Thank you for your understanding! If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. More offers under: ----more offers in stock: VAT can be shown separately. ---- !!! Large selection !!! !!! Constant change of Volkswagen T5 Transporters !!! VAT can be shown separately. ----more T5 Transporters in stock Prices: DEPENDING ON CONDITION Price depends on: - Mileage - First registration - Optical condition - Technical condition - TÜV due - TÜV / MOT NEW - Service due - Service NEW - 1-seater - 2-seater - 3-seater ----VAT can be shown separately VAT can be shown separately ---- - 2 sliding doors, left + right - 1-seater / 2-seater / 3-seater (Retrofitting of passenger seat possible without problems) - Serviced according to service schedule - Regularly maintained at an authorized workshop - Electric mirrors - Parking assist / PDC - Electrically heated mirrors - Airbag - Remote/Central locking - ESP/ASR/ABS - Hill start assist - Electric windows - Height-adjustable steering column - Height-adjustable seats Bwjdpfswwga Esx Abtot - Tinted windows - Partition with window - Sliding door, right, with window - Export > No problem - Forklift loading possible - Net - Export > No problem If you have any questions: Christian Hirsch: If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. More offers under: ---- More offers under / More offers under / Equipment was determined using a VIN query; errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Errors and prior sale are reserved. ---- More offers under / More offers under / Equipment was determined using a VIN query; errors may occur for technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics.

Condition: used, mileage: 19,987 km, power: 129 kW (175.39 HP), first registration: 07/2021, fuel type: diesel, overall weight: 7,490 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2021, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, MB FUSO 8 180 TT-S Dog Transporter For 1-10 dogs, rear and side ramp, pop-out, basement under living area, storage compartments all around. 4 sleeping berths, living room, video surveillance. Parking air conditioning, parking heater, 1 TV/satellite, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating, microwave, refrigerator and freezer, exterior saddle locker, winch, cruise control, alloy wheels, navigation system, trailer hitch, and more. Errors/typing errors and prior sale reserved. Bodezyxdfopfx Abtswt * NET PRICE POSSIBLE. * Top leasing offers. * Net price within Germany plus 19% VAT. Immediately available // Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 09/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, front axle * Central locking with keyless start * Storage package 2 * Lockable, illuminated glove compartment * Preparation for We Connect & We Connect Plus * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "Comfort" Safety: * Summer tires * Front airbags for driver and passenger * Front Assist * Lane Assist * Hill-start assist * Side marker lights * Electronic engine immobilizer * Direct tire pressure monitoring system * Tool kit and jack * Daytime running lights * Spare wheel * Parking assist front and rear * Fatigue detection system * Emergency call system "eCall" * Start-stop system * Electric parking and emergency brake * Reversing warning sound * Extended exterior mirrors Three-way tipper: * Smooth steel floor * Aluminum side boards (completely removable) * Lashing eyes in the floor, left and right * Steel cab protection with ladder support * Lateral underride guard * Wheel arch protection with mud flaps * Side marker lights * Trailer hitch 3.5t trailer load (trailer coupling ball, trailer coupling socket 12V 13-pin) Additional extras for the body can be obtained for an extra charge. Note: Please call briefly before your visit ? we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual construction on request possible. Your vehicle partner since 1996. Call or email us now ? we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale excepted. Best regards Pimenta Automobile Bedsy Tf H Njpfx Abtewt

Condition: new, AEG Modicon AM-C 916-100 CPU board, serial number 0007107, unused, 100% functional. Bsdpfoi D Tu Aox Abtswt

Condition: new, functionality: fully functional, empty load weight: 851 kg, maximum load weight: 2,649 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,040 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 600/3 S 3.5T NEW VEHICLE Internal dimensions: 604cm x 215cm Total weight: 3500kg Payload: 2649kg Braked 3-axle trailer Overrun brake and handbrake from KNOTT or AL-KO 3x 1350kg axles and brakes with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail shaft Numerous lashing eyes along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Side marker lights Rear lights with reversing light, NSL (non-sequential turn signals), and triangular reflectors Cable winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING IN FEBRUARY 2026 -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank rear supports -Anti-sway coupling -Filling of the center strip with screen-printed wood or aluminum tread plate Further accessories available upon request! Plus freight to Gera and vehicle registration certificate: €315 net Images are for illustrative purposes and may show optional accessories that incur an additional charge. Bedpjzvcb Hofx Abtowt Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravan trailers. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!