Used Imc Μ-Musycs for sale (89)

Condition: used, Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm Hodefkpifspfx Anyot -Weight: 6.4 kg

Condition: ready for operation (used), functionality: fully functional, warranty duration: 6 months, - Diameter range: 52.5 mm – 108 mm - Height range: 25 – 155 mm - Production capacity: up to 80 c.p.m. Hedpewlkg Eefx Anyot - Tooling for approx.: Several sizes available

Condition: used, CAN-BUS Digital Data Recorder See also my other offers from the automotive measurement technology sector. 2 units available As shown, without data storage device. BUSDAQ-VW-ET is also known as BUSDAQ-X-ET. CAN nodes: 2-6, 8 on request (extendable with up to 3 MBUS cards; CAN, LIN, ARINC). Baud rate: Max. 1 Mbps. Digital In/Out: 4 (D-sub15). Hedpfx Anewm Ir Ujyst LAN Interface: TCP/IP. External Modem: DSUB9. Storage: Compact Flash. Sync. Plug: BNC. CTRL Plug: DSUB9. Surge protection: 60 V. Supply power consumption: 10-50 VDC, 200 mW.

Condition: like new (used), Can seamer Make: IMC Type: Automatic 1-head can seamer Model: 578 Capacity: 3000 up to 3500 cph depending on can-size, product and circumstances. Range: 54-99mm tin cans height 56 up to 140 mm. (Optionally up to 175 mm.) Direction: Left-right Frame: Mild steel, paint-coated RAL9006 (Stainless Steel-grey) Dimensions: l x w x h = 1400 x 1200 x 2100mm Weight: 800Kg Power-supply: 3x380V+N+E, 2Kw Tooling: Machine equipped with Tooling for 1 size tin-can with classic or EOE steel lids up to your specifications Features: In-feed positioning disc Lid dispenser Lid sensor Mechanical lid separation system Mechanical clutch as-is or set to customer needs Hsdpfxeiba Uhj Anyot

Condition: like new (used), Make: IMC Type: 1 head automatic Model: 478 Capacity: Up to 3,600cph Direction: Left right Frame: Mild steel, paint-coated Dimensions: L x H x W = 1200 x 1300 x 2100mm Weight: 1000Kg Power-supply: 380V+N+E, 2Kw Tooling: 1 set for 153mm tin-can, Features: With Stainless steel infeed conveyor / infeed screw on Stainless steel support Make: Ocim Type: semiautomatic table model ROPP closing machine Model: Super Ermetica Capacity: up to 600 per hour depending on operator Frame: steel painted Dimensions: L x B x H = 1.000 x 700 x 1.700 mm Weight: 150 kg Power-supply: 380 Volt – 50 Hz – 0,37 KW Tooling: 28,5 mm Hedpfeh I Nr Rox Anyjt as-is or adjusted to customer needs

Condition: used, 3 units available. See also my other devices from the automotive measurement technology category. Hedpjwm It Sjfx Anyst Price per unit without disk 4 CAN interfaces

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Hedpfxjn D Ew Io Anyjt Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: used, Year of construction: 2004, total length: 2,900 mm, total width: 900 mm, total height: 1,400 mm, Colour: Grey Empty weight: 1.200 kg Hedpfx Anszxhygjyot - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 3.0 - Max. sheet thickness [mm]: 5 - Max. working width [mm]: 1500 - Top roll diameter [mm]: 140 - Bottom roll diameter [mm]: 140 - Options: Cone rolling, Digital readout, Profile bending attachment - Transport dimensions: 2900mm x 900mm x 1400mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quote from the authorized service partner for €879.59 net for material and labor is available. Alternatively, replacement can be carried out independently. We will provide interested parties with the repair quote upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly by the end user. Fully automatic machine for shrink wrapping and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. SPECIFICATIONS - Output up to 3,600 pieces per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm - Films: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop and safety functions CONDITION AND MAINTENANCE Optically in very good condition. Operating hour counter: 36,415 packages, indicating moderate use. In May 2025, the sealing wire, upper and lower rubber strips, and Teflon tape were replaced. Maintenance and repair documents are available. Due to the aforementioned conveyor belt, the machine will be handed over in the described "as is" condition; inspection and functional testing are expressly desired. SCOPE OF DELIVERY - Machine with glass hood, Magelis touchscreen, safety functions and connection cable - At least one matching film roll with a width of 600 mm - Possibly another remaining roll; the exact stock will be checked before handover - Machine on four swivel casters - Original documents, including data sheet, order confirmation and available maintenance and service correspondence LOCATION, TRANSPORT AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; transport costs will be added to the purchase price. Hedpfx Aoy Stuxonyet PRICE AND SALE - Fixed price: €7,479 net (= €8,900 gross including 19% VAT) - Commercial sale by Marko Strehk Einzelunternehmen - Known wear and tear is fully listed above - The machine can be inspected and tested before handover - In the event of an intra-community delivery, the tax requirements and proof will be checked in advance If you are interested, we will gladly send you the repair quote and the available documents.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm Hedpey Tp E Aefx Anyst The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: excellent (used), machine/vehicle number: 9003-0399, first registration: 12/2024, color: grey, emission class: euro6, Year of construction: 2024, operating hours: 149 h, Mast: Telescopic (13 sections) Superstructure brand: FASSI F .2.27 XHE+JIBL 615+ LIER CE marking: yes Technical condition: very good Optical condition: very good OFFER FASSI F990RA.2.27 XHE-DYNAMIC WITH L615 JIB AND BREVINI BWF3000 HYDRAULIC WINCH Crane year of manufacture: 31.12.2024 JIB year of manufacture: 2025 Operating hours: Only 149 hours --- General description We are pleased to offer you this virtually new Fassi F990RA.2.27 XHE-Dynamic loading crane. The crane is fully equipped with the powerful hydraulic L615 fly jib and a Brevini BWF3000 hydraulic winch. With only 149 operating hours, this crane system is in excellent technical and optical condition. The combination of the powerful main crane, the L615 JIB and the professional winch makes this system the ideal solution for the most demanding lifting operations in the construction industry, machinery and plant engineering, wind power, steel construction and in special transport. Equipment * Fassi F990RA.2.27 XHE-Dynamic * Hydraulic fly jib type L615 * Brevini BWF3000 hydraulic winch * Crane year of manufacture 2024 * JIB year of manufacture 2025 * Only 149 operating hours * Radio remote control * Hydraulically extendable outriggers * Hydraulically pivoting outrigger legs * Endless swivel system 360° * XP high-performance system * ProLink double lever system * Dynamic version * IMC (Integral Machine Control) * FX900 safety control * FX901 touchscreen display Hedpfx Anozxgl Ujyot * D900 digital hydraulic valve block * ADC Automatic Dynamic Control * Flow Sharing hydraulic system * Overload protection * Automatic stability monitoring * Complete hydraulic system * Complete winch equipment * Ready for immediate use Technical data | Feature | Value | | ----- | -----: | | Lifting moment | 80.84 tm (793 kNm) | | Maximum hydraulic reach | 18.05 m | | Maximum reach with L615 JIB | 28.15 m | | Maximum working height | approx. 31 m | | Swivel range | 360° endless | | Operating pressure | 33.5 MPa | | Required oil volume | 80–100 l/min | | Hydraulic oil tank | 250 liters | The Dynamic version comes standard with the XP system, ProLink double lever, IMC control, Flow Sharing and the most modern electronic safety and control systems. Installation dimensions | Dimension | Dimension | | ----- | -----: | | Installation length | 2,540 mm | | Installation width | 2,055 mm | | Transport height | 2,840 mm | Weight F990RA.2.27 XHE-Dynamic with L615 JIB Weight: approx. 9,790 kg Max working height 32 meters Brevini BWF3000 hydraulic winch The installed Brevini BWF3000 is a professional, high-performance hydraulic winch for the most demanding lifting operations. Advantages: * High tensile force * High rope speed * Robust industrial design * Ideal for precision lifting operations * Perfect in combination with...

Condition: good (used), functionality: fully functional, Production line for sealed block bottom bags and standard paper bags. Upon request, we can sell you only the paper bag machine. The necessary parts are available. The sealing unit can also be used offline without the bridge. Pre-printed bottom sheet Self-adhesive bottom sheet In-line coding printer Material: Paper and composites Format: Bag width: 140 mm - 320 mm Bag length: 240 – 900 mm Bottom width: 70 – 180 mm With servo drive - Block bottom standard materials: Uncoated paper: 70 g/m² and 100 g/m² Coated paper: 80 g Plastic films (LDPE): 40 µ, 70 µ and 100 µ PE-coated paper: Pa 60 g/m² + LDPE 40 g/m² airsickness bags: Pa 65 g/m² + LDPE 23 g/m² Paper-aluminum-PE composite: Alu 8/25 and Alu 8/50 PET/Alu/PE composite: PET 12 µ / Alu 8 or 9 µ / LDPE 90 µ - Possible materials Outer layer Coated paper 60–120 g/m² Over 100 g/m² only in large format Inner layer LDPE mono-film 0.03–0.10 mm (possibly needled) Alternatives: LDPE 0.08–0.12 mm OPP 20–40 µ PE-coated paper (various combinations) Aluminum foil on carrier paper with PE coating Construction from outside to inside 30 g/m² bleached kraft paper 12 g/m² PE 0.008 mm aluminum foil 25 or 50 g/m² PE Intermediate layer (only with material 21) Alternative: Bleached kraft paper 80–100 g/m² Hsdpfxezgwnie Anyet Brown kraft paper 80–100 g/m² LDPE 80–100 µ

Condition: used, mileage: 18,700 km, power: 390 kW (530.25 HP), first registration: 08/2024, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Tatra Phoenix 8x8 flatbed truck with Fassi F710 + Woodcracker CS590 – available at an additional cost upon request! ----Vehicle: Tatra Phoenix T158 * First registration: 08/2024 * Mileage: 18,700 km * 8x8 / 6 (last axle steered & driven) * Engine: MX13 – 390 kW / 530 hp * Transmission: ZF TraXon automatic (16-speed) * Condition: like new ----Crane: Fassi F710RA.2.26 xhe-dynamic * Additional folding arm L426 (6-fold hydraulic) * Radio remote control * Continuously rotatable * Hydraulic outriggers (large outrigger width) * Winch 2 t / 60 m * IMC + ADC control system * Stability control Hodpfx Ansy Iiknjyst ----Performance data: Lifting moment: up to approx. 586 kNm * Max. lifting capacity: up to 16,000 kg * Reach: up to approx. 30 m ----Attachments available at an additional cost (price upon request). Woodcracker CS590 flexHead³ * Max. cutting diameter: approx. 60 cm * Incl. Volvo S40 attachment We are happy to provide you with further information.

Condition: excellent (used), mileage: 26,653 km, power: 397 kW (539.77 HP), first registration: 09/2023, fuel type: diesel, fuel: diesel, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 5,000 mm, loading space width: 2,500 mm, Year of construction: 2023, operating hours: 853 h, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power assisted steering, power mirror, spoiler, traction control, trailer coupling, - Valve 3 - Valve 4 - Valve 5 - Front work light - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Leather interior - Leather upholstery - Alloy wheels - Air suspension - Air-suspended seats - Air horn - Media system - Rotating beacon - Rear view camera - Sunroof - Sun visor - Auxiliary heater - Toolbox - Power take-off (PTO) - Tow hitch Weights Unladen weight: 46,495 kg Payload: 9,505 kg GVWR: 56,000 kg Functional Mast: Telescopic (14 sections) Lifting capacity: 30,000 kg Number of valves: 4 Crane manufacturer: FASSI F 2150RA.2.28+JIB L 816 +LIER CE marking: yes Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good OFFER Volvo FH 540 10x4 semi-trailer tractor / flatbed truck with Fassi F2150RA.2.28 XHE-Dynamic + L816 Fly-Jib + Hydraulic winch We are pleased to offer you this exceptionally high-quality Volvo FH 540 10x4, equipped with one of the most powerful Fassi crane systems. This vehicle was specifically designed for the most demanding lifting and transport tasks and impresses with its enormous lifting capacity, state-of-the-art crane technology, and extremely high-quality workmanship. The combination of the Fassi F2150RA.2.28 XHE-Dynamic, the L816 Fly-Jib, the hydraulic winch, and the detachable ballast box makes this vehicle the ideal solution for construction companies, heavy transport, wind energy projects, industrial applications, and specialized installations. Technical data vehicle Manufacturer: Volvo Model: FH 540 Type: 10x4 semi-trailer tractor / flatbed truck Engine: Volvo D13K Euro 6 Displacement: 12,777 cm³ Power: 540 hp Transmission: Volvo I-Shift automatic transmission Engine brake: Volvo VEB+ Cab: Globetrotter long-distance cab Suspension: Full air suspension Front axles: 10-ton version Hjdpfx Anozxgk Dsyet Rims: Original Alcoa aluminum rims Fassi F2150RA.2.28 XHE-Dynamic The truck is equipped with the powerful Fassi F2150RA.2.28 XHE-Dynamic crane. Features include: Fassi F2150RA.2.28 XHE-Dynamic Fly-Jib L816 Hydraulic Brevini winch Front outriggers A total of 14 hydraulically extendable boom sections Radio remote control Endless swivel system 360° XP system Prolink system IMC Electronic Stability System Automatic load moment limitation Additional hydraulic oil cooler Complete hydraulic system CE certified Performance data Maximum lifting capacity: 30,000 kg Maximum working height: approx. 36 meters Large horizontal reach Excellent lifting performance even with a large outreach Ideal for steel construction, precast concrete components, machine relocation, wind turbines, and heavy-duty installations Superstructure The vehicle is designed as a semi-trailer tractor with a flatbed and has a detachable ballast box. Ballast box Length: 500 cm Aluminum side boards Detachable ballast superstructure Several lashing points Pockets for securing loads Non-slip floor High-quality workmanship Weights Technically permissible total weight: 56,000 kg ...

Year of construction: 2011, condition: used, functionality: fully functional, Tonnes produced - 1 800 000 Capacity - 350 t/h First erection in Poland - 2011 The machine has currently been dismantled into its component parts for transport. Cold feeders: Number of beans - 8/pcs Single bin capacity - 14 m3 Drying drum: Lenght - 11 m Diameter - 2,7 m Drum drive - 4 x 22 kW Burner - 2 types of fuel Burner capacity - 24 MW Mixing Tower Hot Bins: Hjdpoy Nc Tfjfx Anyst Number of fractions - 6 pcs Number of hot bins + baypass - 6+1 Total capacity of hot bins - 70 t Scales: Mineral scale max - 4 460 kg Bitumen scale max - 400 kg Filler scale max - 440 kg Puddle mixer: Mixer capacity max - 4 300 kg Mixer drive - 2 x 45 kW Ready mix storage: Total bins capacity - 90 t (2 x 45 t) Number of bins - 2 pcs Additives: adhesive, cellulose Bitumen tanks (vertical tanks system): Number of tansk - 4 pcs Total capacity - 320 t Electrical heating - 7,5+24 kW Filler silos: Silo capacity - 2 x 80 t Coal dust silo - 12 m3 Internal filler capacity - 80t Filter: Producer - DM-IF 750 Air flow - 101 138 m3/h Motor capacity: exhaust ventilator 160 kW Filtrating surface 1 125 m2 Plan height - 27 m Transpor costs on the buyer’s side.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 113018006121, Equipment: documentation/manual, type plate available, Optical measuring system with the following objectives: 1900WD30, 800WD17, 400WD19, and 150WD11. Rotary unit with EROWA clamping system. Ring light, compatible with all objectives. Automated pick-and-place system with 24 positions, featuring the latest software packages: MetMax 4.0.1, Alicona Laboratory Measurement 11.0.1, and Inspect 2023. 2 Inspect licenses available as floating licenses. Hedpfx Anozwuxaeyst Automation Manager.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Hjdpfszmkxhsx Anyet Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: used, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Hedpepvkt Ssfx Anyjt Model: WT-2000PV Type: µ-PCD Condition: Used

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head Hjdpfx Asyt I Axenyst · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: good (used), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang BC-40 CA – used - : Price ex location: only €5,950 (net)! Manufacturer: Bang & Co Model: BC-40 CA Year of manufacture: The BC-40 CA is a fully automatic horizontal stretch wrapper for bundling and spiral wrapping products that need to be secured on a corrugated cardboard sheet. After activating the foot switch, the machine automatically centers the sheet placed on the infeed conveyor and transfers it to the rotating ring. The size of the sheet is automatically detected and assigned to one of ten selectable wrapping programs. The transport and ring rotation speeds are adjustable and are controlled via frequency inverters. The product is automatically fixed onto the sheet by the machine, and a clamping and cutting system attaches and trims the film at the beginning and end of the wrapping cycle. The machine features a quick-change system for easy film roll replacement. Hsdpfx Aney Ru Nueyet - Max. roll diameter: 150 mm - Film width: 70-125 mm - Core diameter: 38 mm - Film thickness: 15-35 µ - Ring rotation speed: 30-140 rpm - Power supply: 220/240 V – 50/60 Hz, 1 phase - Machine weight: 320 kg - Machine start: foot switch - Infeed/outfeed conveyor length: 1500 / 500 mm - Compressed air consumption: 0.75 l/m³ NL/min - Compressed air: 6 bar - Compressed air consumption per cycle: 0.15 Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards Hjdpfxszqhxms Anyjt 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Hedpezcr Nzjfx Anyst Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatic - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front support approx. 14,000 KG Flatbed body with side boards 6200x2550x600 mm Footsteps Diamond plate floor Removable side boards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Hodpfx Anszcr N Ioyet Rotating beacon 8 x Outrigger pockets 6 x Lashing eyes 6500daN Toolboxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile with lashing eyes 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-over wireless remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupler between main boom and fly jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extending knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS wireless remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping Sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger span 10.00m, Outriggers can be operated via wireless remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Observe the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S wireless maxi - 8 linear levers Proportional control block for outriggers 180° hydraulically extendable support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for Jib mounted for 2 functions Control system for additional function rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane Automatic rope winch control AWC - (Automatic winch Control) for JIB Automatic rope winch control Work lights can be operated via display or wireless remote control 1 LED work light mounted on the knuckle arm 1 LED work light mounted on the Jib LED for 2 support legs, not mounted (crane) LED for 2 support legs, not mounted (additional support struts) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB "L42""" Additio

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers Hsdpfszcr N Ujx Anyet 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) Hsdpfx Aozav Ddonyjt - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.