Used Iridex Laser System Oculight Slx With Standard Footswitch And Endoprobe for sale (52,462)

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Nwedpfjzd Uubex Airon Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Nodpfx Ajzd Ut Roirown Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – Vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine is manufactured by the renowned Swiss company STRIEBIG, recognized as a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is in fully working order and ready for use. It is currently in operation at our company and can be viewed while it is running. Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Frequency: 50 Hz Blade diameter: recommended: 300 mm minimum: 290 mm Blade speed: 4750 rpm Vertically moving cutting carriage Mechanical scoring Original dust extraction system Robust steel construction Precise guides Clamps for panels Clear control panel Safety switch Working area Based on the photos: Cutting length: approximately 5300 mm Cutting height: approximately 2200 mm (Please provide exact dimensions if desired). Technical condition: 100% operational Ready for use without additional investment Regularly used Can be inspected during operation Nwodozizy Ijpfx Airsn Very accurate and stable Application Ideal for cutting: furniture panels MDF HDF plywood OSB boards laminated boards plastics

Condition: used, Eos EOSINT plastic laser sintering system P380, fully operational with extensive accessories. Nodpfxjyghhuo Airown

Condition: used, Year of construction: 2012, Offered for sale is a laboratory ultrapure water system with an external filter unit. Power consumption: 80W. Operating voltage: 24V. Equipped with an external filter housing, pressure gauge and hoses. Inspection possible by arrangement. Nodpo Ad Npqofx Airswn

Condition: used, Year of construction: 2008, operating hours: 10,526 h, 2008 | Hitachi ZX350LC-3 with standard earth boom and long-front boom | Used Demolition Excavator | 10526 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 66000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 50 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Some small repairs to be anticipated, maintenance followed with complete history: handlers, numerous hoses, seals, belts... An excavation boom and a long demolition arm approximately 14 m in length. Nwodoy Azpxopfx Airon 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40542 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition. Nodpowf Iq Ujfx Airjwn

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Nwodpfx Aiozdnpxersn Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Nodpfx Ajz Ndq Hsirown Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Nwodpfx Aszyu Igeiren Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Nwsdozgci Espfx Airon Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Nwedjxhfqnepfx Airjn Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: ready for operation (used), * Brand: Sandvik * Model: hopper with vibrating chute and screening machine * Type: Grizzly * Dim. hopper: 5500 x 3000 x 1100 mm Njdjywm N Hopfx Airewn * Dim. vibrating chute: 4500 x 1200 mm * Driving: 2 pieces vibration motors of each 6,2 kW * Dim. screen: 1200 x 1000 mm * Driving: 2 pieces vibration motors of each 0,8 kW

Condition: excellent (used), Year of construction: 2008, For sale is a used TruLaser 3530 laser cutting machine. Technical data: - Operating hours: Beam-on 2955 h / Laser-on 15464 h - X-axis travel: 3000 mm (max. 3104) - Y-axis travel: 1500 mm (max. 1580) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - Max. positioning speed, axis-parallel: 120 m/min - Simultaneous: 170 mm/min - Acceleration during positioning, X-axis: 9 m/second - Xp + Y-axis: 15 m/second - Cutting, X-axis: 4 m/second - Cutting, Xp and Y-axis: 15 m/second Standard equipment: - Enclosed machine frame with integrated laser resonator - Motion unit for optimal processing speeds - Additional high-dynamic Xp axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focal position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Positioning laser diode - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo-radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lenses and quick-change device - ControlLine, capacitive height control and process control - Control system Sinumerik 840D: Open control - Causes of error messages via diagnostic functions Extended machine equipment: - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price: €45,000 net Machine has been disassembled. Can be viewed after prior arrangement. Nwjdpfx Aijixl Tneren If interested, please contact us.

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Nodezp E Sbopfx Airswn Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: new, Scanlab PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full deflection) 1% full deflection: 1.0 ms 10% full deflection: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min.) Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Control interface (alternatives): Digital SL2-100 Extended diagnostic options: Yes (iDRIVE) Supply voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing options: Scan head Connector positions relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other equipment Water cooling: Yes Air cooling: Yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of the deflection angle: < 5 mrad Deviation from the zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Pickup: Secure shipping on a pallet (upon arrangement) or local pickup possible. We will gladly answer any further questions you may have over the phone. Nwsdpfx Aiszikb Uerjn

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 7771, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller model: EC20 - graficzne 2D, bending force (max.): 100 t, working width: 3,000 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 3,000 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, number of axes: 4, table height: 900 mm, travel distance X-axis: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 8,900 kg, total width: 3,100 mm, pressing force: 100 t, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 Nsdpeylt Uksfx Airown - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Year of construction: 2023, operating hours: 12,000 h, condition: like new (used), functionality: fully functional, construction height: 540 mm, Build Cylinder Size: 2x 400x400x520 mm Scanning Speed: 15,2 m/s Scanner: High-precision three-axis digital galvo system Laser: CO2 Laser, 1×100W Max. Chamber Temperature: 190°C Nsdpfx Aion Dxbyerswn Gewicht: ca. 3.000 kg incl. 260kg FS3300 Powder incl. Chiller incl. N2 Generator incl. Breackout Station

Condition: used, Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded with a Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler, and software Condition: used (Changes and errors in the technical data are subject to change!) Nwjdpfxezh Dn Ej Airen We will be happy to answer any further questions you may have over the phone.

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Njdjt Dig Espfx Airswn With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: repair required (used), Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls Nedsda Ny Iopfx Airewn -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) Njdpfxoznr Sxe Airswn - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - IPS PCAP touchscreen and keyboard tray, height-adjustable - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2020, condition: excellent (used), 2020 Coherent EasyJewel 5 Premium Desktop Class 1 Fibre Laser Marking and Engraving System With Rotary Axis Nedszvpy Nopfx Airewn The Coherent EasyJewel 5 Is A Premium Desktop Class 1 Fibre Laser Marking & Engraving System Designed Primarily For Jewellery, Watches, Medical Devices, Precision Engineering & Small Industrial Components. It Is Capable Of High-Resolution Engraving, Deep Engraving, Annealing, 2D Code Marking, Optional 3D Engraving Using Coherent's Laser Suite Software. Chamber Dimension W300 x D200 x H120mm. Marking Field Options Standard Lenses Include Fields Like 120 x 120mm, 180 x 180mm, or 240 x 240mm. Pulse Width 4 to 200ns. Pilot Lase: 660nm (Visible Red Guide). 'Z' Axis Travel 120mm. Voltage 230V. S/No. 40475422 (2020). With BOFA Extraction & Filtration Unit, Laptop With Software, EasyJewel Special Ring Holders, EasyJewel Chuck For Bangle/Bracelet Marking & EasyJewel Chuck For Irregular Shaped Rings. Overall Dimensions L770 x W540 x H750mm. Weight Approx. 87kg.

Condition: as good as new (ex-display), Year of construction: 2023, Fiber laser 1500 x 3000 12kW Year of production 2023 DEMO machine The machine has never worked in production Price includes - exchangeable working table 1500 x 3000mm - 12kW MAXPhotonics source - BLT head with autofocus - HYPCUT software - Nesting software - CYPNEST - Warranty 2 years - Chiller (cooling unit) - Voltage stabilizer - Wireless remote control controller - Automatic high-pressure proportional valve (N2 and O2) - Light curtains - Camera set (3 pcs) with color monitor - CE safety glass Nedpfx Aisr A Ellerswn - Safety sensors - Safety rear gate - Barell filter set - CE declaration of conformity

Condition: used, Year of construction: 2018, machine/vehicle number: 1803006, with extraction system, manufactured by LOTUS LASER SYSTEMS, and an additional pre-filter extraction system, type: VACUAIR UML 350, in new condition. Nwodpoz Nhr Aofx Airjn