Used Keproma Ag Pod 80-600 for sale (32,632)

Year of construction: 2023, condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N Pjdpfx Aiolczm Isrogu waranty 2 Years

Year of construction: 2017, operating hours: 30 h, condition: as good as new (ex-display), Strip thickness max. 4 mm Strip width 300 mm Repeat accuracy +/- 0.05 mm NC drive with compact control unit Feed force 3000 N (300 kg) Psdjb Nbgljpfx Airjgu Strip clamping pressure max. 1.2 tons

Condition: used, Year of construction: 2011, For sale: a vertical machining center Manufacturer: AGIE MIKRON / GF AgieCharmilles Type: HPM 600 HD Year of manufacture: 2011 Control system: HEIDENHAIN iTNC 530 Technical data / equipment: Travel distances X/Y/Z: 600 / 600 / 500 mm Spindle speed: up to 20,000 rpm Tool holder: HSK-A 63 Tool changer: 60 positions Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6.5 kg Max. workpiece weight: 500 kg Feed rate X/Y/Z: 40 / 40 / 30 m/min Table adjustable in degrees Chip conveyor Coolant system Dimensions: approx. 3,500 x 2,350 x 3,050 mm Weight: approx. 9,500 kg According to the operator, the machine is in very good used condition. Inspection possible by appointment. ____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. Pjdpfezk Erkjx Airegu The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: like new (used), Year of construction: 2004, operating hours: 6,090 h, load capacity: 8,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 4,100 mm, Manufacturer + model: KALMAR ECE 80 - 6 Mast: 2F5750 ID: 24051.5020 Category: Used Mast: 2F5750 Forks: 2400 mm Lowered height: 4100 mm Pgodpfxjzv H Tmj Airju Lifting height: 5750 mm Capacity: 8000 kg Year: 2004 Hours: 60 hours Battery: 80 v / 1550 - NEW - Year of manufacture Options: - FULL cabin - LINDE steering - Duo pedal!!! - Spreader / S.s. - Floodlight - Duplex FFL mast - Complete NEW -> FEM 4 A - FORKS

Year of construction: 2020, condition: as good as new (ex-display), Plasma-nitrided rollers, 64 HRC hardness, max. sheet thickness 3 mm, max. width 120 mm, repeat accuracy +/- 0.06 mm at a feed rate of 50 mm, 350 strokes/min. 180° clearance angle. Psdjg Ew Ixopfx Airsgu

Condition: like new (used), Year of construction: 2019, operating hours: 183 h, load capacity: 8,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, Manufacturer + model: KALMAR ECG 80 / 6 * Mast: 3F4700 ID: 26106.8337 Category: Demo Mast: 3F4700 Forks: 2400 mm Lowered height: 2750 mm Lifting height: 4700 mm Capacity: 8000 kg Year: 2019 Hours: 183 hours Capacity: 80v / 1550ah Pjdpfx Aijzv Rr Horogu Options: Equipped with: - FULL cabin (safety gates) - Joystick control for forward/reverse - Spreader / S.S. - Complete street lighting!! - LED spotlight - Triplex FFL mast - Flashing light In complete LIKE NEW condition!!!!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device Psdpowld Upjfx Airsgu 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Pgsdpfjz Ehfajx Airou Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Pgsdpfswld Tfox Airou Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. Dimensions of the system The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Output of the machine The machine has a capacity of approximately 500 kg per hour. Dimensions and weight of the bags The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Pgjdpfxjw Ttxfe Aireu Maintenance costs The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, Cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, Cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Pgsdpfjzc D Agjx Aireu Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2005, Control system: Siemens Sinumerik 840 D / PCU 50 Travel range X 2300 mm Travel range Y 800 mm Travel range Z 600 mm Working areas in tandem operation 2 × 925 × 800 mm Main spindle 30 – 8000 rpm Spindle power 27.0 kW Spindle torque 244 Nm Machine bed: torsionally rigid, stress-relieved welded construction. Guidance system: roller guides Measuring system: direct path measuring system / glass scales on X, Y, and Z axes Resolution measuring system 3 μm / 1000 mm Feed drives: digital three-phase servo motors Feed rate up to 30 m/min Main spindle: water-cooled CELOX motor spindle Tool holder HSK A63 Spindle power 20.0 kW / 18.3 Nm Spindle speed 12,000 rpm Spindle cooling: cooling unit with closed circuit. Spindle orientation freely programmable Tool magazine: rotary tool magazine Tool positions 56 Tool holder magazine HSK A63 Max. tool length 330 mm Max. tool weight 10 kg Max. tool diameter 80 mm Magnum version C80/2300: 56-position Magnum tool magazine Spindle speed 12,000 rpm / 29.0 kW Pgodpfxsz R R Dno Aireu Operating panel BHG / 840D, external Signal light 1-fold Hollow shank taper HSK A63 / 12,000 rpm Compressed air nozzle on the spindle head, controlled by M-function Full enclosure 80 × 2300 Exhaust filter MultiAir exhaust filter Extraction capacity 1200 m³/h Filter stage 1 Metal filter, class G Main filter AeroPlus, class F9 Flushing guns 1 pair, 3 bar / 20 l/min Working area partition C80, manually swiveling in/out Load direction cabinets C80, for tool measurement/inspection Max. tool length load direction cabinet 230 mm Max. NC rotary table RT 500 Max. pickup magazine T3/W2 NC rotary table RT 250 The machine was also supplied with a vertical NC rotary table RT 250, including hydraulic spindle clamping and faceplate. Technical data RT 250: Part accuracy 15″ ± Repeat accuracy 4″ ± Center height 160 mm Runout 0.015 mm Flatness 0.015 mm Bore in rotary table 60 mm Speed max. 22 rpm Faceplate Ø 250 mm Bore in faceplate 35 H7 T-slots DIN 605 12 mm Number of T-slots 4 pcs Drive torque 300 Nm Holding torque 1000 Nm Tilting moment 1200 Nm Transport load 120 kg with tailstock 250 kg Weight approx. 60 kg 2-point transformation optional Further components: - 2 x compressed air guns with quick coupling, spiral connection hose, and holder. - 1 x flushing gun, flushing pressure: 3 bar / 20l/min. - 1 x anchor screws x 2300 - 1 x laser light barrier - 1 x working area partition - 1 x 3D wireless probe system Renishaw RMP 60: System 3D wireless probe system Switching 3D probe stylus yes Transmitter/receiver unit yes Battery 9 V Probing accuracy ± 2 μm Probing speed 3 m/min Probe stylus length 50 mm Ball diameter 6 mm (ruby) Repeat accuracy < ± 2 μm

Condition: good (used), Year of construction: 2004, functionality: fully functional, total length: 880 mm, total width: 700 mm, Equipment: type plate available, Belt Conveyor/Conveyor Belt Manufacturer: Transtechnik GmbH Year of manufacture: 04/2004 Condition: Used Model type: 80/600 Total length: 880 mm Total width including motor: 700 mm Total width without motor: 650 mm Belt width: 595 mm Belt type: smooth Color: Stainless steel/black Material: Stainless steel/aluminum Frame height: 100 mm Drive type: drum motor Internal item number: 2026013003 Pedjyg Nqqjpfx Airogu Thanks to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination even under heavy load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your experienced partner! We are happy to provide you with a customized offer or advise you on design and installation matters. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and our outstanding network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceutical, crafts, and electronics sectors. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology or additional components such as order picking racks or containers.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 55, working width: 600 mm, compressed air connection: 6 bar, type of input current: AC, total width: 2,250 mm, total length: 7,220 mm, total height: 1,840 mm, stack height: 500 mm, overall weight: 3,000 kg, Equipment: CE marking, PERONDI C800 laminating machine and PERONDI R4L 600 in good condition, available for sale. The sale also includes the following equipment, providing a complete and versatile production setup: Hot-melt glue system Feeder Vacuum belt Pressing rollers All included equipment has been part of the production setup and is offered together with the machines. The equipment has been well maintained and carefully operated and is in good condition. Pjdpfsz Hm Ntsx Airjgu Machine highlights: Manufacturer: PERONDI Good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment This is an attractive opportunity to acquire a well-maintained PERONDI C800 and PERONDI R4L 600 laminator with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Oven/frying line Alco AGU 600/6000-E year of construction 2017 and has only been used for a short time of production around 120 000 kg of meat balls since new! Pjdoydpagopfx Airegu Belt width: 60cm Power: 148kW

Condition: used, Year of construction: 2007, Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement. Pgodpfx Aiez A Ekhjrou

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT Pgodpfx Asud H Dmeirou  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT Podpfxouggb Do Airegu  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Pgedpfx Aij Af Rt Esreu Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller Pjdpsxwmacofx Airogu GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT Pgodpfx Aisyzz Irjrju • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SR1477, overall weight: 385 kg, volume flow: 650 m³/h, operating pressure: 40 bar, final pressure: -0.93 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 42 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,750 rpm, warranty duration: 3 months, protection type (IP code): IP54, The TRHC 80-600 has a capacity of 650 m3/h. The 180L-4 electric motor is a suitable drive for the pump. The pump was overhauled in 2025. Free shaft end, without motor and coupling. Parts replaced during refurbishment: new shaft seal, new bearings. Wear plates and impeller re-machined. Pump housing and machine components fully surface-treated and coated. Podpfey Hf Imox Airsgu

Condition: used, Year of construction: 2006, SAACKE gas burner GLS 80 year 2006 6000 KW Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! Pgedpfx Aotzxn Hsirou For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: used, functionality: fully functional, In this offer you buy a used accessory ‘Canon POD Deck Lite XL-A1’ Object of sale: 1 x Canon POD Deck Lite XL-A1: For various Canon imagePRESS models Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. Pjdpfx Aiev R Tx Nerogu For further information, you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Pgodpoxa Elcsfx Aireu