Feeder

Keproma AG POD80-300

Year of construction: 1992, condition: used, Vollmer Saw blade shearing machine type NS 700 Year 1992 Tedpfekmnyfjx Ac Nef

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Tsdpfx Acsvcyf To Nof Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller Tsdpfx Acoidqwpe Nsf

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Tjdpfxshigmbo Ac Nof Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t Tsdpfx Aordi Dloc Nsf

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm Tjdpocxxx Refx Ac Njf control, very good condition

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace. Tedpfx Acjfzb Nio Nof

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Todpfxsfrlnds Ac Nof Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Tedod Du T Iopfx Ac Nof Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Todpfx Aswah R Rjc Nof Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.