Used Krüsi Za66 / 95 for sale (2,736)

Condition: good (used), Year of manufacture: 1998 ZA 66 /95 With laser cutting indicator Dimensions: 5700 x 1500 x 1900 mm Parallelogram table, tiltable up to 60 degrees 4 motors Cross-cut unit Cutting height: 290 mm Saw blade diameter: 750 mm 5.5 kW motor Primary saw Cutting depth: 175 mm (blade 450 mm) Cutting depth: 225 mm (blade 550 mm) 10 kW motor Trimming saws, each 2.2 kW Cutting depth: 125 mm Cgodpfoy Am Eljx Anfou Saw blade diameter: 350 mm Tiltable up to 45 degrees

Condition: excellent (used), Bargain from liquidation: Krüsi ZA 66, swivelling and mobile Csdpfx Asylpv Djnfegu

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Krüsi Krüsimatic G2 – Factory-reconditioned cutting machine with new control system and 12-month warranty The Krüsi Krüsimatic G2 has been completely overhauled and technically modernized by Krüsi Maschinenbau AG. As part of the overhaul, the machine receives a new control system, new controllers, new servo motors, and a completely renewed wiring harness. In addition, the mechanics are inspected and repaired. Technical advantages New control system with current software architecture New servo drives for precise and dynamic axis movements Complete new wiring harness to increase operational safety BTL interface for direct connection to modern CAD/CAM systems Extensive processing options on two independent frames Cgedpfxezbqw Uj Anfeu High flexibility for cutting operations Factory warranty of 12 months on mechanics and newly installed components Long-term service and spare parts support from the manufacturer Technical data Workpiece cross-section: max. 200 × 320 mm Infeed length: 10,000 mm Outfeed length: 10,000 mm Supply voltage: 3 × 400 V / 50 Hz Fuse rating: 3 × 63 A Pneumatic pressure: ≥ 8 bar Air consumption: 10–15 m³/h Control system: IST software / Abb3D Interface: BTL-compatible Processing units Frame 1 5-axis sawing unit (angle-limited) 4-axis milling unit with 5-position spindle head (horizontal) and marking device 4-axis notching unit with 2-position spindle head (vertical) Drilling unit with two horizontal tool holders Chain slotting unit Frame 2 Two vertical chalet milling motors Two horizontal chalet milling motors Two horizontal drilling units Grooving milling unit, horizontal and vertical Accessories Extensive tool equipment included Two compressed air tanks to reduce the weight load on the frames

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) Csdpoy Sgx Refx Anfogu CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: Cgsdoy Ri Hujpfx Anfju - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Cedor Atcyspfx Anfegu Dowel drilling unit 4-head milling unit Automatic feeding system +-1mm Entry length 12m Suitable for wooden house constructions! Available immediately.

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 1996 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m Cjdjvfv Tfjpfx Anfogu KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Cedpfx Anjvwfqqefsgu

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Csdpfx Ajwvwl Ajnfjgu Self-contained Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. So quiet, you can have a conversation beside the working machine.

Condition: new, Reihansl RSH-3.6 / 600 KZ pump SN: 358-11-95, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Codpfsi D Nbfox Anfjgu

Condition: new, GMN TSE 95 - 6000 / 1.1 grinding spindle SN:339464, unused in opened original packaging, 100% functional, scope of delivery as per photos Cgsdpfx Anji Eabvsfeu

Condition: ready for operation (used), Siemens 6FC4100-1AA00-Z central unit SN:T311B095-95, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Csdpfxoi Edxco Anfogu

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs Capacity: 15,500 bph Cell Pitch: 95mm Bottles per row: 16 Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 121,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg YOM 2005 Formats: 0,5l 0,75l The Machine in Detail / Equipment Features Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included Rotating Spray nozzles Single End Machine Label discharge rear right Label press mounted to the machine Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Cgjdpozbha Hjfx Anfeu

Condition: good (used), Center height: 1,000 mm Distance between centers: 15,600 mm Maximum diameter allowed above the bed: 2,019 mm Maximum diameter allowed above the carriage: 1,625 mm Diameter of the faceplate: 1,800 mm Maximum clamping between chucks: 1,500 mm Maximum load: 75 tons Spindle motor power: 82 Approximate dimensions: Length = 21,570 mm, Width = 4,765 mm Accelerated carriage travel: 2,000 mm/min Metric thread possibilities: from 2 to 25 mm Maximum thread length: 800 mm Minimum distance from faceplate to tool: 2,000 mm Accessories: 2 faceplates with a diameter of 1,100 mm on a traveling steady rest 2 steady rests, 150 to 450 mm 2 steady rests, 450 to 750 mm 2 steady rests, 750 to 1,000 mm (on a traveling steady rest) Videos available. Cgodezbt S Iepfx Anfou

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Cedpey U U Tuofx Anfsgu Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Cgjdpfx Anoy Uxt Ejfju Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Cgjdpfx Ajyrtk Senfeu Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Cjdpfx Aoyah R Nonfogu Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Csdoy Su Dbepfx Anfegu

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Cgjdpfsy Su A Rox Anfou

Condition: used, mileage: 94,995 km, power: 75 kW (101.97 HP), first registration: 09/2022, fuel type: diesel, overall weight: 2,300 kg, gearing type: mechanical, number of seats: 2, Year of construction: 2022, Equipment: ABS, central locking, had accident, VW Caddy 2.0 TDI 102 hp, panel van with sliding door and rear swing doors * Audio system Composition Audio (touchscreen color display, 4 speakers) * Manual transmission * DAB+ radio * Trailer hitch * Euro 6d * Cruise control * 6-speed transmission * Electric windows * ABS Cgodpsza Rcbsfx Anfju * Airbags * Electric mirrors * Vehicle is damaged on the right side. * Fully operational * Financing available through our partner banks; we will be happy to assist you. * Special equipment: Armrest for driver's seat, audio system Composition Audio (touchscreen color display, 4 speakers), floor covering in front (rubber), digital radio reception (DAB+), wheel covers / hubcaps, tires: all-weather / all-season tires 16", side airbag in front with head airbag unit, seat cover / upholstery: robust seat covers, special solid paint, steel rims 6.5x16 (black) Additional equipment: Airbag driver / front passenger side, front passenger airbag can be deactivated, automatic headlight control (ALS), exterior mirrors electrically adjustable, exterior mirrors and door handles in exterior black, unpainted, sliding door trim silver, roof rails / roof carrier preparation, EcoProfi, electronic stability program (ESP) with brake assistant, ASR / ABS, EDS, MSR, driving assistance system: multi-collision brake, driving assistance system: fatigue detection, windshield laminated glass tinted, remote control (2) foldable, vehicle without sliding door on the left, speed control system (cruise control) including speed limiter, cup holders in front, glove compartment open, rear swing doors without glazing, rear lights standard, interior: decorative trim matte, interior lights in the loading / cargo area: 1 piece, body / structure: panel van, cargo area partition high, without windows, steering wheel (3 spokes), steering wheel (leather) with multifunction and shift function, steering column (steering wheel) mechanically adjustable, height / longitudinal adjustment, headlight range control, truck registration, engine 2.0 L - 75 kW TDI, non-smoker package, emergency call system, parking brake electric with auto-hold function, wheelbase 2970 mm, tire repair kit (Tire Mobility Set), low emissions according to emission standard Euro 6d, windshield wipers with intermittent operation and light sensor, sliding door right, SCR system (AdBlue technology), seat belts in front with belt tensioner, height-adjustable, seat in front left height-adjustable, sun visors without mirror, start / stop system, sockets 12V in the dashboard and cargo / loading area, door seals with dust protection, door panel plastic, first aid kit and warning triangle, lining in the loading / cargo area: standard, lashing eyes in the luggage / loading area, warning system for seat belts in front, thermal protection glazing green tinted (side / rear) We expressly reserve the right of interim sale, as we also offer this item on other portals. Information on accessories without guarantee. Subject to changes, interim sales or errors. We offer and strongly recommend a viewing and inspection so that there are no false impressions about the condition and suitability for the buyer. Viewings and inspections are possible and expressly desired at any time by prior appointment.

Condition: used, mileage: 2,896 km, power: 434 kW (590.08 HP), first registration: 05/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,150 mm, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,030 mm, total height: 3,960 mm, loading space length: 6,320 mm, loading space width: 20 mm, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, navigation system, parking heater, power assisted steering, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Power steering - Remote central locking - Refrigerator - LED headlights - Leather interior - Alloy wheels - Lift axle - Air suspension - Fifth wheel coupling - Engine brake - Power Take-Off (PTO) - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Available for immediate delivery: Scania R590 V8 / 8x2*6 wide spread. Color: Ivory White. All-round air suspension. 2 x 10,000 kg front axle. Rear axle load: 11,500 kg + 10,000 kg. Permissible total weight: 41,000 kg. Retarder. 515 cm wheelbase. Gearbox with crawler gear and overdrive. King of the Road. Auxiliary heater with cab and engine heating. Premium driver's seat. Coffee maker. Refrigerator. Loading platform: Sliding table 170 cm. Headboard with storage space for ladder and outriggers. Cedpfozbqxxox Anfogu 2 x round support legs 90 cm. Stainless steel boxes all around. 4 x width marker with lighting. Large continuous box between the axles. Outriggers. 4 x outrigger row. Outrigger pads in the side rail. Recessed tie-down eyes in the side rail. Twist locks / adjustable in width. Work lights in the side rails. Stainless steel rear frame with work lights and flashing lights. Water pipe / (exhaust). Crane: HMF 9520 K7 Preliminary outrigger setting. Fly jib: FJ 2200 K6 2 x manual extension. Winch: HMF 3200, Capacity 3,200-2,500 kg. 4. 40 m - 17,010 kg. 5. 90 m - 9,030 kg. 6. 80 m - 7,070 kg. 7. 80 m - 5,710 kg. 8. 80 m - 4,770 kg. 9. 00 m - 4,010 kg. 10. 10 m - 3,470 kg. Jib: 11. 20 m - 1,705 kg. 12. 70 m - 1,545 kg. 13. 20 m - 1,410 kg. 14. 80 m - 1,295 kg. 15. 50 m - 1,195 kg. 16. 30 m - 1,115 kg. 17. 10 m - 985 kg. 2 Manual extension sections. 18. 00 m - 700 kg. 19. 90 m - 400 kg. = Further Information = Technical Information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread left: 100%; Tire tread right: 100% Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread left: 100%; Tire tread right: 100% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Rear axle 2: Tire size: 385/55R22.5; Steerable; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 27,862 kg Payload: 13,638 kg GVW: 41,500 kg Functional Crane: HMF Interior Upholstery: Leather Maintenance MOT (Technical Inspection): valid until 05.2027 Financial Information Price: On request Identification Model number: R590 - 8x2 WIDE SPREAD / HMF 95 = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: new, Trovalisier - and slide grinding machine Make: ABOAGYE Cgjdpfx Asdwq Hgenfsu Model: TV 95 SL Condition: new machine Speed: 1,500 3,000 rpm (stepless) Trough inside dimensions: 498 x 384 x 410 mm Filling volume: 70 l equipped as standard with: -Timer -Water tank -Water pump -Manual

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations Cgedpfx Aovut Ewenfju with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table

Condition: new, Year of construction: 2026, functionality: fully functional, PLATEN LENGTH MM. 3000 Cedpfxsi E Tz Ho Anfegu PLATEN WIDTH MM. 1300 PRESS STROKE MM. 400 VERTICAL CYLINDERS 6 - DIAM. 70MM. INTERMEDIATE PLATENS CONFIGURATED TOTAL THRUST 90 TON TOTAL POWER KW 21 HEATING DIATHERMIC OIL