Used Laboratory Foam Dosing Station for sale (8,167)

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request! Guodpfx Akju D E A Dsajg

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Gusdpfeh Akm Tjx Akasg

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Gedeibx S Nopfx Akajug Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: new, DOPAG Micromix The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled. Godpfx Akexcgpzeajug

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Gsdpez Ai Tpofx Akaeug Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: Guedpszd Unbsfx Akasg - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: excellent (used), functionality: fully functional, Special offer! From the inventory of the city of Meschede, we can offer you this top-condition, complete "G 7882 CD" system from the world-renowned brand Miele. This unit is a fully automatic system for cleaning, disinfecting, and reprocessing medical devices and containers. The included basket features special holders for laboratory glassware and other containers – see images. The G 7882 has an internal, automatic dosing system for cleaning and additive agents, which are stored in a separate housing. The unit has never been used commercially and has seen very little use; the installed filters have only a few operating hours. All components are in perfect optical and technical condition; there are no significant damages – see images. Equipment: - Cleaning and disinfection unit - Washing basket - Data cable - Operating manual - Operating hours of the fine filter: 111 hours - Operating hours of the coarse filter: 27 hours Technical data: Weight (net): 120 kg Height with device cover: 85 cm Height without device cover: 82 cm Width: 90 cm Gsdozzcf Nepfx Akaoug Depth: 70 cm Depth with door open: 126.5 cm The sale is exclusively for commercial businesses; you will, of course, receive an invoice – but without VAT, as the item comes from a public entity. Private buyers have the option to purchase the unit "on behalf of a customer"; a direct commercial sale to private individuals will not take place. The goods are sold with the exclusion of any warranty or liability for defects. The exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. The total weight of the system, including accessories and pallet, is approximately 140 kg! The unit can be collected from our premises by appointment during regular opening hours. Insured shipping via a freight forwarder is possible for an additional charge. Delivery will be made within three business days after payment receipt via a freight forwarder – you also have the option to collect the unit from our premises during regular business hours by appointment. If you have any questions, please contact us directly using the contact details provided.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Gusdpfxjyil A Sj Akaog Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. Guodpfx Akjzi Upceaog The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid Gusdpjztc Nfofx Akaeg • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Year of construction: 2022, condition: like new (used), Due to the closure of our laboratory, we are offering a wide selection of laboratory equipment for sale, all in very good to excellent condition. All equipment has been used as intended, regularly serviced, is fully functional, and ready for immediate use. Our current inventory includes: - GCMS (Shimadzu GCMS-TQ8040 NX, Nexis GC-2030) - LC MS/MS (SCIEX Triple Quad 6500+, Shimadzu LC-40Dx3) - Shimadzu UV-1900i Spectrophotometer - Titan MPS Perkin Digestion System - Millipore Milli-Q Direct 8 Water Purification System - Vacuum Pumps - various units - Heating Mantle - Q-Msystem Pollab Temperature and Humidity Recorders - Shakers - Centrifuge - Pipetting Station - Ohaus Balance: Explorer EX12001/M - Rotary Evaporator - Cryogenic Mill - Multitube Vortexer DVX 2500 VWR Sample Preparation Device - Emergency Showers - Laboratory Island 3000/1800 - Gas Sterilizer - Glycol Chiller and many more. Guedpsxmhfrsfx Akaog This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical industries to acquire high-quality equipment at attractive prices. We invite you to contact us and view the equipment on-site in Olsztyn, Poland (Warmia-Masuria Voivodeship).

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. Gsdpfjzzlntjx Akaeug The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Year of construction: 2025, operating hours: 2,000 h, condition: like new (used), Complete, as-new Subitec LS180 photobioreactor lab system, built and commissioned in 2025 (07/2025), used only in a controlled laboratory environment. A ready-to-run, turn-key platform for microalgae cultivation and process development — not a bare reactor frame, but a full working package: reactor, high-power lighting, gas management, cooling and a modern B&R automation system with touchscreen and secure remote access, all in one compact unit. At its core is a 180 L Flat-Panel Airlift (FPA) reactor in transparent PVC. Internal static mixers and downcomer geometry create gentle, continuous circulation between lit and shaded zones for optimal growth — without any mechanical stirring. Highlights: Gjdpfx Aezluymjkaeug Superior, proven performance: in-house cultivation has reached growth rates above 5 g/L/day and densities up to 14 g/L with Chlorella vulgaris. Powerful lighting, high-efficiency light path: double-sided dimmable LED (~4,080 W, full 400-780 nm spectrum), ideal for high-density cultivation and for studying versatile light regimes. Easy to run and keep clean: low-shear airlift circulation, transparent panel with no gradual film build-up, intuitive touchscreen operation. Compact footprint vs. bulky tubular systems (approx. 2.6 x 0.8 x 3.2 m). Tailor-made beyond the standard Subitec design: automatic CO2 dosing via a Bürkert control valve and real-time concentration measurement of the outgoing (off-gas) CO2 for carbon-uptake monitoring. Data-ready automation: all key process variables (pH, temperature, CO2 dosing and off-gas uptake) continuously logged on an open B&R platform. Technical data: Reactor: Flat-Panel Airlift (FPA), 180 L, transparent PVC; aluminium frame Dimensions (L x W x H): approx. 2.6 x 0.8 x 3.2 m Year built / commissioned: 2025 / 07/2025 — as-new Temperature range: 5-30 °C; noise < 70 dB(A) Lighting: LED, double-sided, ~4,080 W, 400-780 nm, max. 500 µmol/m²/s per panel, dimmable Automation: B&R X20 PLC (X20CP1685 / X20EM1612), 4 GB eMMC, Profinet, full I/O set HMI: B&R Power Panel T80 12.1" touchscreen Remote access: Tosibox Lock 670 secure router CO2 dosing: Bürkert 8741 mass flow controller (0-10 Nl/min, Modbus TCP), pH-based PID control CO2 off-gas: Norsk Analyse GD10P NDIR analyser (0-100 vol-%, CH4-immune) Cooling: two reactor-integrated heat exchangers + dedicated chiller Control cabinet: Rittal (800 x 1200 x 300 mm); Hager main switch, 3-phase RCD & breakers Supply: 3 x 230 VAC / N / PE, 16 A; 24 VDC control Scope of delivery (single working package): 180 L FPA reactor in aluminium frame; double-sided dimmable LED lighting; gas-mixing unit and filtered (0.2 µm) gas supply; Bürkert CO2 mass flow controller; Norsk Analyse off-gas analyser; chiller and integrated cooling; periphery (media/harvest lines, filters, sampling unit); exhaust unit (foam trap + air lock); Rittal cabinet with B&R automation and 12" touchscreen; Tosibox remote access; temperature and pH sensors. Support: operator training included (remote, or on-site by agreement). We can also advise on the best use of Chlorella strains, recommend species that perform well in this reactor, and share relevant cultivation data. Location: Lahti, Finland — viewing by appointment. Price and delivery terms by agreement.

Year of construction: 2025, condition: ready for operation (used), A like-new dosing machine Gabler, manufactured by Volkmann and used only once for testing purposes, is available. Screw conveyor: 10m, Conveying height: 3m, Conveying capacity: 600kg/h, Bulk density: 0.6-0.7kg/l, Particle geometry: Powder, Min. particle size: 5µm, Product feeding station: RNT180, Vacuum conveyor: PPC250VS, Product feeding: Bag emptying, Filling volume vacuum conveyor/product feeding station: 17l/400l. Machine dimensions X/Y/Z: approx. 1000mm/750mm/2200mm, Weight: approx. 250kg. Documentation available. An inspection on site is possible. Guodpfxezidh Uo Akajg

Condition: used, functionality: fully functional, Equipment: CE marking, type plate available, Used Colortronic material dosing system with control cabinet, 5x CSK 5 vacuum receivers, small mixer unit, 30 pieces of aluminium pipes – 6 m length, diameter 50 mm, bends made of stainless steel, mixing station. Gedpfx Aksy Smg Isaeug

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Godpfsx Uy Rlex Akajug Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity). Gedpfxjztn Uaj Akaoug

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Gedjzmap Aepfx Akasug Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. Gedpfx Aezmap Njkaeug More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, manufactured in 2021 by the premium manufacturer Rational (successor to the VCC 211). A major inspection was carried out in our in-house workshop, and the iVario L is in excellent condition. The offer does not include any accessories, but they can be purchased separately for an additional charge. The list price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21038052776 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional Further details: Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosing High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable Integrated hose shower on the unit Integrated water drain in the pot Temperature unit adjustable in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): adjust liquid temperature, adjust pot base temperature, adjust oil temperature Automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Gsdpezvndtjfx Akajug Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Condition: used, Year of construction: 2001, functionality: fully functional, Groninger Filling and Capping Line – Type DFK 6001 & KVK 206 Manufacturer: Groninger GmbH, Crailsheim Models: DFK 6001 (volumetric dosing filler) & KVK 206 (dropper inserter/capper) Year of manufacture: 2001 Machine No.: DFK 5265 / KVK 5266 Electrical connection: 220/380 V, 3 phase, 50 Hz Documentation: Machine and operating manual (German) available Line output: Gjdpfxew Sd Nrs Akajug According to manufacturer: up to 9,000 units/hour Actual recent operation: approx. 8,000 units/hour Output infinitely variable Technical Data – Filler (DFK 6001): 6-head volumetric dosing filler for free-flowing liquids Currently equipped with stainless steel pumps (dosing range 10–133 ml) General dosing range: 0.15–266 ml Bottles up to Ø 100 mm, max. height 320 mm Subsurface filling possible (also for foaming products) Pumps can be quickly removed for cleaning and sterilization Filling needles are adjustable in height and laterally Operation via control panel (on right) and dial scale handwheel (at rear) Working area protected by folding glass doors Manual feed via rotary table Ø 1000 mm, onward transport via plastic slat-chain conveyor Technical Data – Capper (KVK 206): Dropper inserter & capping machine Performance range: Object Ø: 20–100 mm Object height: 30–250 mm Cap Ø: 10–60 mm Cap height: 10–60 mm Capacity: max. 9,000 units/hour Closures separated in sorting bowls, fed and placed automatically Press-fit stations and capping heads synchronized Torque clutch adjustable for defined closure force Finished, closed bottles ejected on the right Processed formats: 4 bottle formats: 40 / 50 / 80 / 125 ml Same droppers and screw caps for all formats Dimensions (approx.): Line: 700 × 270 × 225 cm Control cabinet: 180 × 60 × 220 cm Application areas: Pharmaceutical industry Cosmetics industry Chemical industry Special features: Compact, GMP-compliant stainless steel line Flexible dosing ranges, also suitable for foaming liquids Ready for immediate use Condition: Well-maintained used condition Available immediately from Çorlu, Turkey Price: On request

Condition: excellent (used), Year of construction: 2013, operating hours: 404 h, functionality: fully functional, machine/vehicle number: 500897, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KR C4 Compact, teach pendant manufacturer: KUKA, teach pendant model: SmartPad, KUKA KR 6 R900 sixx FLR with KR C4 Compact controller and SmartPad The robot will be delivered with new memory backup batteries. The replacement has already been scheduled and will be carried out before the device is handed over to the new owner. Complete robotic workstation based on the KUKA KR 6 R900 sixx FLR industrial robot, along with the KR C4 Compact controller and SmartPad operator panel. The robot comes from a research and development environment and was used for laboratory and testing work. As a result, it has very low operating hours, approximately 404 hours, which is a small number compared to robots operating continuously on production lines. Specifications: Manufacturer: KUKA Model: KR 6 R900 sixx FLR Payload: 6 kg Gedpfx Ajziczmokaeug Reach: 901 mm Number of axes: 6 Year of manufacture: 2013 Controller: KUKA KR C4 Compact Operator panel: KUKA SmartPad Operating hours: approx. 404 h Application The robot is ideal for applications such as: automation of production processes, assembly stations, CNC machine operation, vision systems and machine vision, quality control, research and development laboratories, education and training in the field of robotics. Technical condition The device comes from a research and development laboratory. The visual condition is very good. The robot starts up and communicates with the controller. Before shipment, the device undergoes additional technical verification. Included: - KUKA KR 6 R900 sixx FLR robot, - KUKA KR C4 Compact controller, - SmartPad operator panel, - complete set of cables, - mounting base. Additional equipment It is possible to equip the workstation with: - pneumatic and electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation components. More information on tobesold.eu Product covered by a start-up warranty.

Condition: excellent (used), 447 USED Automatic bulk raw material dosing system Reimelt. EQUIPMENT: - 4 internal silos for flour, - 6 tanks, silos for mixes or flour. - 6 tanks for micro-raw materials, - mixers, - pumps, - raw material transport pipes, - bowl dosing station (hopper), - flour catcher, - water mixer, - water cooler, - automation control, THE SET IS A COMPLETE INSTALLATION. Paid options available: transport of the device. Gedpfxszxntts Akasug Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total length: 6,700 mm, working width: 650 mm, total width: 1,100 mm, table length: 5,200 mm, Canol Make-Up-Line "Canolino" 5.2 (with about 670 cm overall length) Guedpoy Na T Nofx Akajg Make-up-table / -line / dough-processing-line "Canolino" 5.2 with about 65 x 520 cm working belt, year 2004, designed to produce a wide variety of products like puff- pastry products with odr without filling, yeasted products and other pastry specialities. The "Canolino" line is easy to use and mounted on wheels, it comes with a dough-belt calibraion head, a huge varity of different cutting rollers (incl. croissant roller or special roller for "Stutenkerle" (=sweet-yeast-dough / gingerbread-man), a water-drop humidification station, a volumetric filler (V4 F) / electric screw-depositor with 4 outlets, suitable for dosing creamy products with spot, continuous or intermittent dosing, a motorised winding roller, for example for snails or other wound products, various winding and folding tools and pressure rollers as well as a motorised guillotine knife for cross-cutting. Perfect for the use in small and medium-sized bakeries. The wide range of easy-to-use and also easy to mount accessories can be changed in a short time nearly without tools. The electric guillotine can also be moved on the desired position. The make-up table is manual controlled for very simple operation and managing the various work functions. All components and accessories are electrically operated (also filler, guillotine knife) so there is generally no need to use compressed air. The make-up-line and all accessories (as shown in the photos) are in good "bakery-condition" and are offered for sale fully cleaned and ready for use. Dimensions: approx. 670 cm in total length, approx. 110 cm in width and approx. 195 cm in height (control unit and filling station)

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Guedpezw D Haefx Akaog Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment