Used Lisec Glass Cutting System for sale (50,942)

Year of construction: 1998, condition: ready for operation (used), A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible. Ibodoy Eg A Nopfx Agyec

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Ibjdpfx Agey Rulijyoc Available: NOW

Year of construction: 2002, condition: ready for operation (used), A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible. Ibodpfxjzi Eige Agyjc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total width: 7,500 mm, total length: 35,000 mm, overall weight: 32,000 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec combination line for jumbo-sized sheets with automatic storage and loading table: Configuration: LBR - ATF - GFB RE S - LKT - BHK Ibsdpjz Abahofx Agyec

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking. The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process. Line Components: 1. Float and Low-E Glass Cutting Table - Model: LiSEC ESL-60/30RS-L - Serial number: 030-062962 - Year of manufacture: 2013 - Glass thickness: 2–19 mm - Cutting of straight and irregular shapes - Low-E coating removal system 2. Laminated Glass Cutting Table - Model: LiSEC VB-33 - Serial number: 040-014769 - Year of manufacture: 2013 - Designed for cutting laminated glass - Supported configurations: 33, 44, 55, 66 and 88 3. Glass Breaking Table - Model: LiSEC BTS-37/33 - Serial number: 054-054715 - Year of manufacture: 2013 - Weight: 1,525 kg - Maximum load: 55 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 10.89 kVA - Operating pressure: 8 bar - Protection rating: IP32 4. Tilting and Transport Table - Model: LiSEC ATH-60/30FD - Type: Double-Sided Moveable Glass Un/Loading Station - Serial number: 011-071248 - Year of manufacture: 2013 - Weight: 6,040 kg - Maximum load: 48 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 7.80 kVA - Operating pressure: 6 bar - Equipped with new mechanisms and vacuum suction cups for handling glass sheets Condition: Ibodpfoz Ilrijx Agysc - The complete production line is in good working condition and fully operational, - Documentation and additional technical information are available upon request, - A set of spare parts is included with the production line, along with an estimated value of the spare parts, - The production line will be available for collection from December 2026, - On-site inspection of the machinery is possible by prior arrangement. Note: - Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction) - The metal guideways in the floor for the Tilting and Transport Table are not included in the sale

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table Iedpjz N Dquofx Agyobc for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 2,500 mm, total height: 3,500 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, feed length Y-axis: 3,500 mm, overall weight: 3,550 kg, type of input current: three-phase, power: 17.06 kW (23.20 HP), Equipment: documentation/manual, Used Lisec VL-1N/25 insulating glass manufacturing machine for sale, year of manufacture: 2009. Type: VL-1N/25 Serial number: 361-053012 Weight: 3,550 kg Total load current: 24.60 A Apparent power: 17.06 kVA Voltage: 3/N/PE-50Hz 400 V Pressure: 6.00 bar Maximum material load: 250 kg/m Auxiliary current: 8.0 A AC/DC voltage: 400 / 24 V Ibodpfx Agoz Nkh Tsyec LISEC VL-1N/25 automatic thermal insulating glass sealing robot – 2500 x 3500 mm. Automatic edge sealing machine designed for applying secondary sealant to thermal insulating glass units. The machine consists of an infeed and an outfeed section, as well as a discharge station. A separate measuring unit located in front of the machine measures the thickness of the glass panes, the air gap between them, and the total thickness of the thermal insulating glass unit. The top edge of the thermal insulating glass unit is guided by a horizontal roller beam. This allows the glass units to pass at a defined distance in front of the back panel in the sealing sections. They are transported using a patented, wear-resistant conveyor chain, which supports the lower edge of the unit only minimally, leaving the sealing groove free for the application of the sealant. A linear-guided vacuum suction system integrated into the back panel ensures that the thermal insulating glass units are transported without slipping. The machine can also process polyurethane in 200-liter containers of component "A" + 20-liter containers of component "B", as well as silicone in 200-liter containers of component "A" + 20-liter containers of component "B". The machine can be viewed in operation and will be dismantled in mid-January. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Ibodpfx Aex Tq S Dogyjc

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Isdoz Dhm Ujpfx Agyobc

Condition: good (used), Year of construction: 1994, Cutting unit with edge peeling for the Lisec ESL-60/30RS cutting line In good condition, as it has rarely been used. Length: 1100 mm Width: 800 mm Ibjdeyx Dvmepfx Agyoc Height: 850 mm Weight: 120 kg Condition: Good, second-hand

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Ibedpfjzqc U Nex Agysc Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is See video Ibedjxlq Nwopfx Agyjc Availability immediate

Year of construction: 2013, condition: excellent (used), functionality: fully functional, HIGHLIGHTS - camera system connected to a 19" screen for monitoring the cabin Isdpfx Agol D Rp Teyebc - interchangeable pallet table allows loading and unloading of the machine outside the working area - compact design - smoothing function for small holes and cut-outs for better cutting quality - complete databases for cutting technologies - CAM CONCEPT FINEST Professional software - Significantly lower maintenance costs compared to CO2 laser technology TECHNICAL DETAILS sheet size: 3000 x 1500 mm positioning speed up to 100m/min positioning accuracy +/- 0.03 mm laser source: 2,0 kW cutting capacity steel: max. 17 / 14 mm cutting capacity stainless steel: max. 10 / 5 mm cutting capacity aluminum: max. 8 / 6 mm Cutting power: max. 6 / 5 mm Cabin: with sliding door; complies with laser protection class 1 Control system: ECK-827 (based on Windows XP), multi-process control system Control connections: 2 LCD displays, 4 USB ports, LAN adapter Control functions: simple and intuitive software, diagnostics of machine operation, advanced functions such as scaling, rotation, mirror image of cutouts, database of cutouts, complete databases for cutting technologies Software: CAM CONCEPT FINEST Professional (automation/NC programs, many data interfaces, cutting optimization) Laser source: fiber laser source from the company IPG (Ytterbium Laser YLS 2000) Special features: Fiber optic conduction of the laser beam, low power consumption, low cost of cooling, life expectancy of the source up to approx. 100,000 hrs. Cutting head: PRECITEK Functions: Anti-collision system, error recording system, function of precise positioning, enables quick change of focal length. pallet table: 2 pieces Filter system: noise level

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). Iedpfxjz Rvi Ee Agyebc This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 510000087, BAVELLONI MTS 42 For sale: a well-maintained Bavelloni MTS42 glass cutting machine, boasting the renowned reliability and quality of Bavelloni. It is an ideal choice for glass processing workshops, ensuring precise and efficient operation. Key features: Ibedpfxoy D Eq Ne Agyec – Working dimensions: 3700x2750 mm – Thickness: 3-19 mm – Speed: 120 m/min – Power: 21 kW – Precision cutting head with adjustable cutting pressure – Stable, robust machine frame designed for a long service life – Easy-to-use control system – Suitable for fast and accurate series production – Well-maintained, ready for immediate use A reliable, industrial-grade machine designed for heavy-duty use, offering excellent value for money. For sale due to company closure! European installation can be arranged!

Condition: new, Year of construction: 2024, total height: 1,800 mm, total width: 1,000 mm, total length: 2,000 mm, Glass storage rack suitable for storing and transporting glass and other sheet goods. Load capacity: 2000Kg Length: 2000mm Width: 1000mm With appropriate inclination angle. The racks are suitable for cranes, with points suitable for connecting a crane on top. With rubber pads to prevent damage to the stored glass or other materials. Isdpfx Agexddcheyobc A forklift space is provided at the bottom. The racks are completely new, have CE certification and a data plate. Discount for larger quantities! Ask about stock!

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Hegla EcoLam 37 Plus: Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system Ibsdjz Apcwepfx Agyoc - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm - LKTR area: 7,000 mm

Condition: used, Year of construction: 2007, functionality: fully functional, BOTTERO 352 BCS-J - Year 2007 Monolithic glass automatic cutting table Shape cutting Tilting function Ibjdjz N Hruspfx Agysc Air cushion system Breaking bars: 3 short, 1 long Glass size: 6100 x 3300 mm Thickness: 2-19 mm Speed: 120 m/min Accuracy: +- 0.25 mm Power: 16 kW

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. Ibjdpfx Aoz Nyv Tsgyec The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: good (used), Year of construction: 2007, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, Glass cutting line for split strips - consisting of: Glass Hegla Cutting Table OPTIMAX3323F 6372 2007 00305 Glass Hegla Glass loading Table BBS 3323 7176 2007 00306 Ijdeu S R Iljpfx Agyebc Glass Hegla Breakout Table LKB 4230 15811 2007 00307 3 racks included , fencing included

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Ijdpfexa Excox Agyebc

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Iodey Nwtyepfx Agysbc Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 Iedpfx Ajyh T Ruogyobc min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total length: 11 mm, total width: 2,500 mm, total height: 3,500 mm, working height: 520 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, power: 60 kW (81.58 HP), Lisec glass washing machine VHW-25V8, year 2002, working direction left/right, with 8 brushes for low-e, including following: - inlet conveyor (3,3 m) maker MBR (Maschinenbau Radovanovic) - Glass washing machine VHW-25V8 - outlet conveyor (4,4 m), maker MBR - 2 hot water tanks Iodszq S A Nopfx Agyebc - 2 sandfilter - 1 blower The machine is in very good working order and is available from current location in Germany by the end of October

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. Ibodpfx Agoz Ru Iyjysc The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.