Used Loiresafe Tooling Press for sale (44,962)

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Height: 120 mm Key features: Electro-hydraulic drive Itjdoxl E Nfspfx Aizsg Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Iodpfxswbvmie Aizetg Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control Itodpfx Aowva I Heizsg - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 Isdjdzp Tcspfx Aizotg - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Itedpfjy Tbvmjx Aizsg Weight: approx. 120 kg For further dimensions see pictures.

Condition: used, #200103 Trumpf EVO22W10 (28 pieces / without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Without identification groove Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm Total length: 5570 mm ----- #200104 Trumpf EVO22W10 (12 pieces / identification groove at bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm Isdsyx Hxwjpfx Aizstg 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm Total length: 2470 mm ----- #200105 Trumpf EVO22W10 (28 pieces / identification groove center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm Total length: 5825 mm ----- #200107 Trumpf EVO26W24 (14 pieces) 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm Total length: 3000 mm ----- #200108 Trumpf EVO24W16 (17 pieces) 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm Total length: 3585 mm ----- #200109 Trumpf EVO20W6 (11 pieces) 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm Total length: 3700 mm ----- #200110 Trumpf EVO22/S-W10 (9 pieces) 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm Total length: 2740 mm ----- #200116 Trumpf EVO28W40 (13 pieces) 86.00° R5.00 / H=100.00 / 1200 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 1x 200 mm 1x 300 mm 4x 500 mm Total length: 2750 mm

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed Iedpfemck Ryex Aizstg - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Year of construction: 2025, condition: new, functionality: fully functional, Partial segment UKB die / lower tool system AMADA 415 mm V16 R2 85° V22 R2.5 85° V35 R3 85° V50 R4 85° Partial segments UKB upper tool system AMADA 415 mm, 150 mm, 35 mm, 15 mm and horn left/right 100 mm R 0.8 / 85° H 66.5 Furthermore, we offer a 835 mm die (manufacturer Eurostamp) which is structurally identical to the offered UKB dies. Ijdpfxsyqyc Sj Aizetg This die is slightly damaged, but fully functional and is offered for €70.00 if interested.

Condition: used, #200112 Trumpf OW200/S (16-piece) 86.00° R4.00 / H=218.30 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 40 mm 2x 100 mm (reduced body 70 mm 1x left / 1x right) 5x 200 mm Itedpfxjy Anydj Aizog 5x 300 mm Total length: 2820 mm ----- #200113 Trumpf OW201/S (18-piece) 86.00° R1.00 / H=220.00 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm (2x reduced body 70 mm 1x left / 1x right) 1x 200 mm 7x 300 mm Total length: 2850 mm ----- #200117 Trumpf OW200/S (18-piece) 86.00° R1.00 / H=220.00 / 800 kN/m Segment lengths: 18x 100 mm Total length: 1800 mm ----- #200118 Trumpf OW/S (28-piece) 86.00° R1.00 / H=220.00 / 400 kN/m Segment lengths: 4x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 1x 50 mm 4x 100 mm 5x 200 mm 8x 300 mm Total length: 4170 mm

Condition: good (used), lathe pressing tool, roller block, support roller -Support roller: solid design -Roller: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm Itedpfowvfwgex Aizeg -Quantity: 1x roller stand available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm table surface 1500mm x 1000mm Front light curtain Itodpfx Aokw Rbaeizjg Siemem control Weight 12,5to

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm OZU-318 Itsdpfx Aisyzh Sdjzjg 100x80° R=20 H=100 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: used, Selling price: CHF 2.100 (excl. BTW) Online auction of the surplus sheet metalworking machines, aluminium sheet stock and welding tools (e.g. RAS, AMADA press brakes, SUHNER, MIG MAG ESAB, TRM fiber laser welding etc.) following the outsourcing and decommissioning of the metal and welding workshop in Illnau-Effretikon (near Zurich) in Switzerland. The online auction opens Thursday 16 April and closes Thursday 21 May. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 19 May Pickup days are on: - Tuesday 2 June - Wednesday 3 June Isdpfx Aey E Hpvjizjtg Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, gebraucht WA0181 prompt, Zwischenverkauf v 1800 € 1 3100 mm 160 mm 45 mm mint condition Isdpeyukavefx Aizstg 86° Slightly cranked, planed

Condition: used, gebraucht WA0137 1960 € 1 3000 mm Itjdpfx Aieyui Tuozjg 190 mm slightly cranked

Condition: new, Press brake tool/upper punch for Trumpf press brake Itodoiimz Repfx Aizeg H256mm, L500mm, L550mm in segment

Condition: new, Press brake tool/upper punch for Bystronic press brake P5 RFA Style 30 degree H250mm R1.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment Iodpfx Aisiim Dwozetg

Condition: new, Press brake punch of amada/promecam style 30 degree R0.6mm, H104mm, L835mm, L835mm segmented Itodpfx Asin I Dtsizsg

Condition: new, 85 degree press brake punch of amada/promecam style R2.0mm, H145mm, L835mm, Itodpfein I E Hex Aizsg L835mm segmented

Condition: new, Special forming tool Iedpfx Aioiq Di Hszetg

Condition: new, punches and dies for EHT press brake Ijdolp Hnzspfx Aizetg

Condition: new, Trumpf style Press brake tooling 86 degree R1.0mm H157mm Max. 40t/m Itsdpfx Aietw Uxbozeg L500mm&L550mm sectionalized

Condition: new, EHT press brake punch 86 degree H220mm R0.5mm Sectionalised lengths Isdovlwn Ropfx Aizetg

Condition: new, 88 degree press brake punch of amada/promecam style R0.8mm, H120mm, L835mm, L835mm segmented Itsdjin I D Ejpfx Aizsg

Condition: new, press brake die Multi-V dies Iodpfx Ajip Dayjizetg