Used Lum My-1320 for sale (2,842)

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Fjdpfxow Rwipj Ap Dogh Minimum mouth size( mm ): 8mm Maximum die cutting pressure( T ): 350N/cm² Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Fgodpez Nv H Usfx Ap Dsh Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%) Fgsdpfx Apsw R Skno Djh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Fsdez D Tt Tepfx Ap Dsgh Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: used, Year of construction: 2008, Technical details: max. turning diameter: 350 mm turning length: 1040 mm control: OSP E 100 L Fanuc greates pass round over bed: 550 mm Max. distance between centres: 1200 mm max. workpiecediameter: 550 mm Traverse X-Axis 1: 270 Traverse X-Axis 2: 230 mm Traverse Y-Axis 1: 120 (±60) mm Traverse Z-Axis 1: 930 mm Traverse Z-Axis 2: 920 mm Spindle 1 Power: 22 / 15 kW Spindle 1 RPM: 5000 1/min spindle nose: JIS A2-8 bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret 1 tool RPM: 4500 1/min Turret 1 power rotary tools: 7.0 / 3,3 kW Turret No.2 stations / rotary tools: 12/12 VDI 40 Turret 2 tool RPM: 4500 1/min Turret 2 power rotary tools: 7.0 / 3,3 kW rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 40 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 7,0 x 2,3 x 2,3 m Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. Fgsdpfxez Ig Sqs Ap Doh There are 7 identical machines available, all in very good and well maintained condition. *

Condition: used, Year of construction: 2007, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. Maximum temperature: 1,320°C Power: 30 kW Fgsdpsz H I N Iefx Ap Deh Heating power: 1 control zone, zone 1 = 30 kW Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Fsdpfxozi Ihfe Ap Dsgh Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Year of construction: 2008, operating hours: 16,000 h, condition: good (used), functionality: fully functional, OKUMA SPACE TURN LB3000 EX Lathe Year: 2008 Control unit: OSP-P200L Maximum workable length*1 (capacity): 500 mm Maximum workable diameter: 400 mm Bar feeder included, Model: IEMCA MASTER 880 33 P/R Chip conveyor with belt Software for gear cutting included, along with the corresponding gear-generating tool (as shown in the attached photo). Fgedpoz Aku Iefx Ap Deh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC machining center Hedelius Forte 65 Single 1320 Control system: Heidenhain TNC 640 Year of manufacture: 2019 Availability: in transit Internal machine number: 74 Travel distances: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area: 1,500 x 650 mm Table load: approx. 1,200 kg Tool holder: HSK 63 Tool magazine: 65 positions Spindle speed: 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system, 900 l - Internal cooling lubricant system, 25 bar Fgodpfx Ajzzmirjp Djh - Chip conveyor - 1x flushing gun - Electronic handwheel

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor Fjdpfx Apjzat Tve Degh - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t Fodoz Ig Swjpfx Ap Dogh dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter Fgodpfxeyvfhds Ap Doh - Renishaw probe - Extraction unit - Various accessories

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Fgsdpjzw Nu Nofx Ap Doh Workholding and tooling are not included. MUST BE PICKED UP BY SEPTEMBER 2026.

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Fgedoy R A N Aspfx Ap Doh Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: excellent (used), functionality: fully functional, pre-milling aggregate granulate glue station maximum working height 60 mm guillotine for trimming edge band from the roll precision edge band trimming unit Fsdpfozlc H Usx Ap Dogh milling aggregate for trimming edge band excess from the top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2012 CE mark

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Fedezzwmuopfx Ap Degh Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Commissioned: 2002 Control system: U100L A video of the machine can be viewed on our website. Machine features: ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic Fedpezh Iwkofx Ap Djgh • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. Fgjdpfozuxwujx Ap Deh • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Weight: 6000 kg Fodjqucnbjpfx Ap Dogh Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: excellent (used), SCHIESS HoriTurn 4080 MY CNC Turning Center - Max. turning diameter: 400 mm - Max. distance between centers: 800 mm - Max. load between centers: 800 kg - Max. workpiece weight without support: 200 kg Fgjdpez Ha Nyjfx Ap Djh - Axis X / Y / Z travel: 305 / 100 / 900 mm - Rapid traverse X / Y / Z: 20 / 10 / 25 m/min - Axis X / Y / Z acceleration: 5 / 2 / 5 m/s² - Max. spindle speed: 4000 rpm - Torque: 403 Nm - Rated spindle motor power: 13 kW - Swing over bed: 780 mm - Swing over chuck: 410 mm - Tool interface: BMT-65 - Number of tools: 12 - Number of driven tools: 12

Condition: good (used), Year of construction: 1998, Used Kitamura machining centers Type: Mycenter 2X Yasnac CNC control Max. spindle speed: 10,000 rpm Excl. clamping on the table Fsdpfey U I H Iex Ap Djgh Tool holder: SK 40 X: 610 mm Y: 510 mm Z: 510 mm Tool changer

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Fgsdpjylkgqjfx Ap Djh Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Condition: used, mileage: 10,16,268 km, first registration: 03/2011, fuel type: diesel, overall weight: 115 kg, color: white, driver cabin: sleeper cab, emission class: euro5, suspension: air, Year of construction: 2011, RENAULT MIDLUM, TWO-AXLE, WITH WHEELBASE EXTENSION AND RETRACTABLE TAILGATE Fsdpfx Aszk D Nnsp Degh

Condition: new, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug Fsdjxabz Hopfx Ap Dsgh

Condition: good (used), 1320 KLT stacking boxes 800 x 600 mm (other dimensions also available) 33 pallets a 40 pieces (including packing ) SSI shepherd shop boxes Price is valid for purchase of the offered number of pieces. If you wish other quantities, please contact us. Offer is directed to dealers, resellers, public and church institutions ! From private inquiries we ask to take distance ! 1320 stacking boxes KLT boxes from SSI Schäfer by additional reinforcements up to 40 kg loadable, ideal also for use as planters Article no. for the whole unit KLT8060_1320 Inquiry please with indication of a telephone number stacking boxes (1320 pieces) used and good optically good, no damage (new price seen for 35,-€ per crate) 3,- Euro net / box Ideal for storage rack, parcel trolley, picking trolley, transport container, transport trolley, storage rack, firewood trolley or can be used for yellow bags, elastic bands provide additional stability of the side rails, as these can be pressed outwards during filling. can be pressed outwards during filling. With the basic dimensions of 80cm x 60cm the boxes have the ideal the ideal size for eurostandard crates, e.g. bakery crates 60x40cm or meat crates 60x40cm or all other boxes with dimensions 600x400mm and also 800x600mm In other auctions we offer tension belts, tension rubbers, foil hoods, wheels and shelves, bakery crates and meat crates (E2 crates). We are happy to advise. also suitable rolling containers in stock / see photos: Dimensions rolling trolley: Base area 810 x 720 mm height ca 1530 mm loadable up to 500 kg Dimensions stacking boxes: 80 x 60 cm height 11,5 cm (all dimensions are approximate) Fgjdpfxel Tiqyj Ap Djh Viewing possible after telephone arrangement Trolley can be disassembled and fits in (almost) any car (photo similar) other items in stock, if interested please contact us.