Used Helmerding for sale (18)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: SV 18RA, chuck outer diameter: 200 mm, Very well-maintained lathe for sale Bjdexv Sm Eopfx Addodk

Condition: used, Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 831170, The machine is only operational with two-hand control; the foot switch is missing. Bsdoxpftrspfx Addodk

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new Bdjdpfx Ajt Ei Hnjddsk press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm Bedpfxjxh Sx Es Addodk tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Bdodpfx Adsdzqmzsdek Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: excellent (used), Sell well preserved Helmerding eccentric press Bedpefdnw Hefx Addjdk Very little used!

Condition: good (used), Year of construction: 1977, Type EL 35 B Year of manufacture 1977 Machine no. 5182 Pressing force at 30° before BDC 35 t 350 kN Adjustable stroke 12 - 80 mm Adjustable ram 70 mm Bdjdpfx Ajwxxr Aeddek Ram strokes per min. 110 Adjustable table 150 mm Safety distance 150 mm Overrun distance 50 Weight 2050 kg

Condition: used, Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine Bdodpfx Adehv S Etsdjk -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Year of construction: 1997, condition: ready for operation (used), A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible. Bdedpfxovnd Sne Addjk

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement Bdodpjtrhf Aefx Addek - Machine safe for hand inlay work

Condition: used, Year of construction: 1991, Pressure capacity 1,500 kN Adjustable stroke 20 - 132 mm ram adjustment max. 90 mm Stroke rate 50 / 75 1/min. Bdedpfx Aorm Nqmsddjk Further data and pictures on request used, the press is currently completely disassembled not functional and must be mechanically and electrically overhauled

Condition: good (used), Year of construction: 1987, functionality: fully functional, throat depth: 180 mm, ram adjustment: 60 mm, total height: 2,000 mm, table width: 360 mm, table length: 560 mm, total width: 950 mm, total length: 1,680 mm, overall weight: 1,750 kg, pressing force: 25 t, Projection 180 mm Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Bdedpfxet Sgrus Addsk Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm Bdsdpfx Adordi Dlodsk ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Year of construction: 1988, condition: used, pressure 100 t throat 300 mm stroke 20 - 124 mm strokes per minute 60/90 ram adjustment 85 mm table surface area 920 x 600 mm ram surface 540 x 290 mm daylight, max. stroke above - ram adjustment above max. 440 mm hole in the table 290 x 170 mm tool hole in ram Dm. 50 mm total power requirement 6,5 - 8,5 kW weight of the machine ca. 5,7 t dimensions of the machine ca. m - gear transmission - 3-way bearing shaft - semi-automatic stroke adjustment - circulating oil lubrication - hydr. coupling - separate hydraulics with oil cooler The machine will be partially overhauled as follows: - Dismantling and verification Bedpfoguz Susx Addodk - Connecting rod receives a new bush and is spindled out - new paintwork - new control cabinet with touch panel and ABB safety control - new wiring - Current UVV test with braking time measurement

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm Bdedpelp U Rvofx Addsk stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm Bdjdpfx Aed Nl E Ujddsk ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Year of construction: 1982, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 40-60 Hub/min ram - range of adjustment 85 mm Bdodpfx Ajlp U Iweddjk table surface area 1050x690 mm ram surface 650x320 mm hole in the table 325x200 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 8,6 t dimensions of the machine ca. 2500x2500x2900 mm

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm Bedpjp Apxhofx Addodk no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm