Used Mütek Systemtechnik Dust Extractor, Suction Device, Filter for sale (22,207)

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Kdjderb D Nspfx Afusn Air flow rate 1850 m³/h / 400 V

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Motor-powered lathe, optional Euro 500 + VAT Suction motor power:: Kw. 4 Kdedstxdpxspfx Afuen Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Kjdpfx Aey Sz Dnefujdn Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: ready for operation (used), Local Exhaust Unit, Workplace Extractor, PlymoVent S-1, Used Machine,smoke suction,dust extractor,plymovent Manufacturer: PlymoVent Model: S-1 Overall Dimensions: Kdsdpfx Ajxa Hldofuon Width: 1600 mm Depth: 660 mm Height: 1510 mm Weight: 103 kg Year of Manufacture: 2001 Max. Airflow: 1400 m³/h

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 31 m², Dust extraction unit, chip extractor, self-cleaning filter, vacuum, pneumatic ALKO MOBIL JET 300 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is positioned on the clean air side, minimizing explosion risk. The unit is additionally equipped with a fire protection system. Perfectly suited for wide belt sanders and all types of dry dust in various technological processes – filtration bags can be replaced to suit specific requirements and applications. Fan power: 7.5 kW Capacity: 6000 m3/h Vacuum: 2400 Pa Nozzle diameter: 300 mm Air return Kjdpfx Asy Rz T Hofujdn Automation for direct start from machines. Stock no.: 1131

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 with dust filter is a compact, mobile professional dust extractor designed for efficient removal of chips, dust and sawdust in woodworking workshops. The fine dust filter ensures not only strong suction power but also increased filtration efficiency, improving air quality in the workplace. Main advantages of the machine Performance 1,000 m³/h – ideal for use with medium and small woodworking machines. Dust filter – effectively captures fine particles, including sanding dust. Motor 0.75 kW / 230 V – quiet, energy-efficient operation without the need for three-phase installation. Mobility – four castor wheels allow easy movement around the workshop. Compact design – takes up little space, ideal for small workshops. Kdjdpfx Aeycuckjfuen Design and technology The unit is equipped with a metal chip extraction fan ensuring long service life and reliability. The high-quality dust filter effectively separates fine particles from the air stream, reducing workshop dust levels. The solid, powder-coated housing protects internal components, while the sealed suction system prevents pressure loss. Precision and efficiency The CORMAK FM230 woodworking extractor provides stable and consistent suction. With an output of 1,000 m³/h and low power consumption, it efficiently serves a single woodworking machine without interruptions. The fine particle filter also makes it an excellent dust extractor for sanding applications. Applications Small and medium-sized joinery workshops Craft and production facilities Technical schools and training workshops Home and hobby workshops The FM230 works perfectly with milling machines, planers, jointers, belt sanders and thicknessers. Standard equipment Dust filter Waste collection bag Castor wheels with brake Bag fastening clamp Optional equipment Extraction hose Ø100 mm Suction port reducers Additional set of filter bags Technical data Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Vacuum pressure 1,800 Pa Noise level 70 dB Bag capacity 60 L Number of bags 2 (filter + waste) Suction port diameter 100 mm Dimensions (H × W × L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Kjdpfevz Az Iox Afuedn Speed: 2908 rpm

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Kdsdpfxjnt Uc Ro Afuen Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Kedpfx Ajgl Nlmefuodn Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Kedpfxjchuvrs Afujdn Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Kdodjv Rpxlopfx Afujn Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Ksdsgfm Ryopfx Afusdn Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Kdjdpfx Asffh Atsfuen Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Ksdedwktkopfx Afuedn Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotational, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen hole size optional (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxbxh) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented base + €2,170 net (prevents the slide from blocking. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. Kdjdsgmfa Aspfx Afuen We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. Kdodpfxovg U Dxo Afuen -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Kdsdpfezd Twbex Afuon Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: used, • Type: DSH2/12V • Suction cup type: 150K • Year of manufacture: 2013 Kdsdjywi Dmjpfx Afusn • Serial number: 84 • Lifting capacity: 900 kg vertically/horizontally • Lifting capacity per suction cup: 150 kg vertically/horizontally • Can rotate and tilt • Includes battery for independent operation on construction sites

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Kdjdpfx Afox Edmpsujn Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Ksdjzd An Njpfx Afusdn Storage location: Nattheim.

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit Kodpozfqgiefx Afuedn - pre-assembled

Condition: used, functionality: fully functional, FELDER RL300 Wood Dust Extractor Kodpozd S U Sjfx Afusdn Specifications: • Condition - used, after a comprehensive inspection • Manufacturer - FELDER • Model - RL300 • Turbine motor power - 9.2 kW • Filter cleaning system with compressed air • Dust collection drawer - 2 x 250 liters • Maximum capacity - 7,880 m3/h • Weight approx. 750 kg • Overall dimensions - 265 x 112 x 225 cm (L x W x H) Additional information: • The machine is in very good technical condition and ready for immediate use. • The fire extinguisher system is not charged. • The photos shown reflect the actual condition of the item being sold. • Possibility to turn on and test the device on site. • Free training on machine operation (at the company's premises). • The price stated in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using MDD's fleet, courier companies, or external carriers. • We can provide financial support in the form of leasing or a lease loan.

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Kedpfx Aozcqxuofujdn Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW weight of the machine ca. 1,9 t Kdodpfx Aezczkzofujn dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Kdodpfxjwhui Ae Afusn Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim