Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair pa...

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Chsdpoznkpvofx Alrsa Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Chedpfx Aewxmb Eslrea Delivery time: immediate.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Table size: approx. 3,000 × 500 mm Cjdpfxozncnqe Alrsha Spindle connection: SK40 Maximum speed: 6,000 rpm Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 EQUIPMENT Additional angular/universal milling head Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Chedpszncnksfx Alroa Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Chedpfx Aewlcqvjlrea Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 Chedpfx Aozncndjlrsa MACHINE DETAILS Control system: Siemens 840D

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Csdpfx Ajzncm Holreha Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Csdpfx Aljkw H Eksreha Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Chsdpfx Alozncmtsrja Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Csdpfx Alszncmaorjha Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Chodpeu Nigkofx Alrsa Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Chsdpfx Aleznbkkerea Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders. Chsdpsznbgrjfx Alrsa

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Chsdsvt Tptopfx Alrsa Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Chsdpfx Aszlqdzjlrja Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt