Used Madag Pressor P 130 for sale (44,940)

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Dkedox I Nfropfx Aa Njl Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 83200 € 1572.48 € 130 to 4.5 mm 650 mm 950 mm 220 mm 1 - 132 mm 50 1/min 6 95 mm 70 mm 325 mm 500 mm 11 kW 1800 mm 1725 mm 3020 mm 8000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate Dkjdpfjwiqn Rsx Aa Nsl o.r. hydr. overload safety device o.r. etc.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: Ohne, The Solarfold PV Container is an innovative, mobile photovoltaic solution for flexible power generation precisely where energy is needed. The entire solar power plant is housed in a 20-foot high-cube container and can be assembled and commissioned on site in a short time. With an installed capacity of up to 130 kWp and a total of 196 PV modules, the Solarfold offers a powerful, scalable solution for temporary or mobile energy supply. The system is fully pre-configured and pre-wired. Thanks to its innovative aluminum rail system and mobile ground anchors, the installation can be set up without complex foundation work or cable trenches. This makes the Solarfold particularly suitable for projects with changing locations. Technical highlights: Rated power: up to 130 kWp PV modules: 196 units Container: 20' HC (High Cube) Transport weight: approx. 13.5 t Module surface area in operation: approx. 6 m × 123 m Integrated inverter Modules fully pre-wired Rapid assembly and disassembly Advantages: Mobile power generation for flexible sites No soil sealing or cable trenches required High energy yields and short payback period Transportable by truck, train, or ship Dkodpfxoytblyj Aa Nol Typical applications: Construction sites and infrastructure projects Agriculture Industry and commerce Events and festivals Charging infrastructure for e-mobility Temporary power supply or off-grid applications The Solarfold enables sustainable, economical, and flexible power production and can be combined with battery storage systems as required by the project.

Condition: new, functionality: fully functional, Year of construction: 2026, Do you need a mobile and powerful compressed air supply for fiber optic installation, construction sites, sandblasting, dry ice blasting, or earth rockets? We offer high-quality and robust mobile models from the manufacturer Hertz Kompressoren, based in Bamberg. Many models are available for immediate delivery from stock or are pre-ordered for shorter lead times. Technical data: Model: Hertz MSP 1300 mobile screw compressor Free air delivery: 1.30 m³/min at max. working pressure of 7 bar (Free air delivery: 1.0 m³/min at max. working pressure of 15 bar version) Drive engine: Briggs & Stratton Vanguard 23 HP Rated engine output: 13 kW Handling: Fitted with rollers for manual movement Sound level: 97 dBA Dimensions (WxDxH): 1200 x 790 x 790 mm Dodpfx Asib Du Usa Nekl Weight: approx. 175 kg Equipment: - Optional compressed air aftercooler available Additional accessories such as compressed air hoses according to DIN 20018 and couplings are available. If you have any questions, please do not hesitate to contact us. Feel free to call us. We are also happy to handle commissioning, maintenance, and machine approval for you. Errors and prior sale excepted. All prices plus VAT. Delivery condition: ex works, packed. Best regards, ROHE INDUSTRIETECHNIK Your specialist company for compressed air and automation.

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm Dkedpfx Aod Hp Tzja Nol -Weight: 416 kg

Year of construction: 2009, condition: used, MADAG DP H120 Hot Stamping Machine • Year of manufacture: 2009 • Pre-owned and fully functional machine • Manufacturer: MADAG (Model DP H120) • Application: Stamping • Optional: Inspection and demonstration available upon request Dkjdpfexy Ra Eex Aa Nol ___ Our General Terms and Conditions apply. The seller is not liable for typographical errors or data transmission mistakes. All information and images were provided by the owner and authorized for publication. The visual condition of the items corresponds to their age and the photos shown. The technical condition and wear of the items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: like new (used), I am selling a complete Yaskawe Motoman UPT 130 T robot. Dkedpfx Aaju Tk H Dj Nsl

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dkedpsi D Iqkjfx Aa Nsl

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN: 58102 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dksdpji D Iqrefx Aa Nol

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 planetary gearbox SN: 2186 incl. motor flange, unused in opened original packaging, 100% fully functional, delivery as per photos. Dkjdpfx Asy Npg Sja Nel

Condition: ready for operation (used), Heidenhain UV 130 ID 324998-01 The costs cover only the repair analysis of your component, which you can send to us. After evaluation of your component, you will receive a quote with the actual repair costs. If you authorize the repair, the analysis costs will be waived. As part of the repair, your component will be fully overhauled and comes with a 3-month warranty from us. Dkjdpfey Nrmusx Aa Njl

Condition: ready for operation (used), Heidenhain UV 130 ID 324998-03 The costs only include the repair analysis of your component, which you can send to us. After your component has been examined, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. Your component will be completely overhauled and comes with a 3-month warranty from us. Dksdpfx Asy Nrm Ija Nol

Condition: ready for operation (used), Rexroth / Indramat MAC090B-0-PG-2LF/130-A-0/S003 Permanent magnet motor SN:MAC090-70004 ,used, strong signs of wear, 100% functional, scope of delivery as per photos Dedpfx Aaeu Tm Haj Nskl

Condition: ready for operation (used), Heidenhain UV 130 ID 324998-02. The costs cover only the repair analysis of your component, which you can send to us. After evaluation of your component, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will receive a 3-month warranty from us. Dkjdoy Nrmzspfx Aa Nol

Condition: ready for operation (used), Rexroth MAC093B-0-JS-4-C/130-A-1/WI517LV 3-Phase Permanent Magnet Motor , hole spacing of mounting holes. 116 x 116 mm, Ø drive shaft: 24 mm, used, overhauled by manufacturer in 2007, not in use after that, very good condition, in original box, 100% functional Dkedpfx Aasi D Nf Rs Nol

Condition: ready for operation (used), Servowatt DCP 130 / 30CX Operational Amplifier SN:87401-30, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfx Aei Ec Tyea Nekl

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Permanent magnet three-phase servo motor, hole spacing of the mounting holes: 152x152 mm, drive shaft diameter: 32 mm, used, normal signs of use, 100% functional, shipping costs please inquire separately! Please ask for transport charges! Dkedpfx Aoi D Ii Dsa Nel

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-56032, used, strong signs of use, 100% functional, scope of delivery as per photos Dkjdpfx Aaji D Im Se Nel

Condition: ready for operation (used), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 permanent three-phase servo motor + Heidenhain Rod 1424.003-600 Rod encoder. 250 040 12, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Dkjdpfxoi D Ipqs Aa Nsl

Condition: new, Indramat MAC112B-0-GD-3-F/130-A-0/S0054 Permanent Magnet Motor , S.No. MAC112-80864, unused in opened original box, 100% working ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Dsdoi D Ip Rjpfx Aa Nskl

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 . 100455119 F-No. 2315656 Planetary gearbox Serial number: 7777, unused, in sealed original packaging, 100% operational, scope of delivery as per photos. Dksdpfjy Nrzljx Aa Njl

Condition: new, Neugart WPLS142-005-SSSB3AG-E24/50/130/165/B5/M10 bevel gear Item No. 100336738 SN:2231204-1, unused in opened original packaging, 100% functional, scope of delivery as per photos Dkjdpfx Aoi Eb Ufoa Njl

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water Dkjdpfx Aoy Ih Sksa Nsl - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Distance between uprights: 2600 mm Motor power: 15 kW Dedpfoyvh Dvjx Aa Nekl Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, color: other, overall weight: 12,400 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: Dkodsy A Exqepfx Aa Nsl -High capacity -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 12400 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!