Edge milling and cutting

Brandt Optimat FTK 130

Year of construction: 2004, condition: not inspected (used), Brandt Optimat Edgeband trimmer with edge trim Bought by us as a used machine for a product line that didn't launch. Was functioning when decommissioned, we barely used it. Podpfoxguhgex Ab Iegw

Condition: new, Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-200 mm Feeding speed 0-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Dust cleaning brush 0,37 kW Feeding motor 4 kW Podpfx Abjdflqao Iogw Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2400mm Weight 3300kg

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock! Pgedpfx Abjdrc Txs Iow

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Refurbished Warranty: 12 months Included: Oil filling (mineral oil), operating manual with list of initial files Voltage: 50/60Hz 230-400/460V Motor rating: 4 KW Pjdpfjcnyy Hjx Ab Iogw N. suction capacity: approx. 200 m³/h Final pressure without gas bellow: approx. 0,08 mbar Delivery time: ex stock

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Pgodpfx Abov H E S Ts Iow Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), functionality: fully functional, mileage: 27,000 km, power: 380 kW (516.66 HP), first registration: 11/1998, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, Year of construction: 1998, GTLF - TLF 10000, Rosenbauer body, Pgodpswihaqefx Ab Ijw 5000 liters of water 5000 liters of foam Or 10000 liters of water only RM 60 E monitor, 80-meter throw range, 40-meter NW38 rapid attack system 2 Barth trailer hose reels, each with 3 x 20-meter compressed air hoses, auxiliary heater, rearview camera, EPS circuit, Delta-Matic foam proportioning system

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 125 mm suction socket 2 x Ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Table milling machine with one-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Positioning control for height and swivel adjustment with zeroing of the height and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Push button for spindle start and stop Left and right rotation Cutter quick clamping device Fine planed cast iron table with rigid frame support Control panel at the bottom of rigid frame support Milling stop 216 total adjustment via handwheel and LCD display incl. cast stop plates and aluminium splitter tongues Machine socket Pjdpfx Abefpb Nmo Iegw Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, not exchangeable CE-conform GS tested

Condition: used, IDC000100 Complete sawmill Podpfevgdy Aox Ab Isgw - Valon Kone VK26M with infeed and outfeed conveyors - merry go around system - ARIVislanda KS12 37 kW x 2 - ARI Slab saw - ARI KL10 split saw - Soderhamn Eriksson 519C, edger with chipper heads - Bruks Chipper 1300 Complete with control system and mechanization.

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Pgsdpfedqzh Rox Ab Isw Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 Pgodpfovuhumjx Ab Iew year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.