Used Madrew High Speed Edger 35-55 Board/Min for sale (59,448)

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. Ljdpfxenygvrs Aqvohg 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: ready for operation (used), Gildemeister 9.635.839 High Board 25-355 , serial no. according to photo, used, normal signs of wear, 100% functional Ljdpfx Aqji D U Tgsvjhg

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn Lodpovtpdgjfx Aqvshg N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the option of adding material during operation. Ledpfx Aqoy Nzkvovshg Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Machine with an enlarged format up to 1000mm. Technical data: Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Lhsdpfswz Ufwsx Aqveg Type: Two chucks

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Lhodpfx Ajwz Ukyjqvog Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW Lhjdpfxjrtn Nzj Aqvsg The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Ledpexvy Hmefx Aqvshg

Condition: ready for operation (used), Foot-mounted motor RÜETSCHI Switzerland 54 kW / 60 Hz / 3552 rpm Lhodpfeq H Rvvox Aqveg Shaft 65 x 150 mm Weight 375 kg

Condition: new, Year of construction: 2026, saw blade diameter: 460 mm, cutting height (max.): 160 mm, cutting range round steel at 90°: 160 mm, saw blade speed: 120 rpm, cutting range square steel at 90°: 110 mm, cutting diameter: 160 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 120 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Saw Machine – CHK-160 Circular saw machines are industrial cutting solutions designed for the high-precision and mass cutting of pipes, profiles, and solid metal materials. They are widely used in serial production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Saw Machines deliver high production efficiency thanks to their robust mechanical structure and advanced automation system. Cutting parameters can be easily set via the PLC-controlled automation and touchscreen operator panel, enabling high-precision and serial cutting operations. The ductile cast iron machine body, powerful transmission system, and servo feeding technology ensure vibration-free operation and long tool life. CHK Series machines are engineered for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular cutting technology • Servo drive feeding system • PLC-controlled automation system • High cutting precision and stability • Robust machine construction for industrial usage Application Areas • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supply industry Standard Features • Precision cutting and smooth surface finish Ledpoyq N Nzofx Aqvjhg • Special transmission design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo drive feeding system • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter measuring system • Chip cleaning brush driven by hydromotor • Air pressure control system • User-friendly PLC control unit • Torque control system prolonging blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-160 Cutting Capacity (Round): Ø40 – 160 mm Cutting Capacity (Square): Max 110 × 110 mm Cutting Capacity (Rectangle): Max 140 × 120 mm Main Motor Power: 15 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Blade Size: Ø460 × 2.25 × 2.7 mm Blade Speed Range: 30 – 120 rpm Single Feed Length: 720 mm Bundle Material Feed Length: 3000 mm Trim Length: 60 – 70 mm Machine Weight: 4600 kg

Condition: new, Year of construction: 2026, saw blade diameter: 285 mm, cutting height (max.): 80 mm, cutting range round steel at 90°: 80 mm, saw blade speed: 200 rpm, cutting range square steel at 90°: 50 mm, cutting diameter: 80 mm, rotational speed (min.): 200 rpm, rotational speed (max.): 200 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-80 Ledpfx Aqjyq N Hmjvohg Circular sawing machines are industrial cutting devices used for high-precision and rapid cutting of pipes, profiles, and solid metal materials. They are particularly favored in mass production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency through their robust mechanical structure and advanced automation system. Thanks to the PLC-controlled automation system and touch operator panel, cutting parameters can be easily configured, enabling high-precision batch cutting operations. Featuring a spheroidal cast iron machine body, a powerful transmission system, and servo feed technology, the machine operates vibration-free and prolongs tool life. CHK Series machines are engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular saw cutting technology • Servo-driven feed system • PLC-controlled automation system • Superior cutting precision and stability • Heavy-duty industrial machine construction Typical Applications • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and sub-industry sectors Standard Features • Precision cutting and smooth surface quality • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip removal brush • Air pressure control system • Easy operation with PLC control unit • Torque control system that extends blade life • Easy adjustment of vice pressure based on material type Technical Specifications – CHK-80 Cutting Capacity (Round): Ø10 – 80 mm Cutting Capacity (Square): Max 50 × 50 mm Cutting Capacity (Rectangular): Max 70 × 50 mm Main Motor Power: 7.5 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø285 × 1.7 × 2 mm Blade Speed Range: 20 – 200 rpm Single Feed Length: 750 mm Bundle Feed Length: 3,000 mm Remnant Length: 60 – 70 mm Machine Weight: 3,050 kg

Condition: new, Year of construction: 2026, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, saw blade speed: 160 rpm, cutting range square steel at 90°: 75 mm, cutting diameter: 100 mm, rotational speed (min.): 160 rpm, rotational speed (max.): 160 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-100 Circular sawing machines are industrial cutting machines used for the high-precision and fast cutting of pipes, profiles, and solid metal materials. They are widely utilized in mass production lines to achieve rapid, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical construction and advanced automation systems. With a PLC-controlled automation system and touchscreen operator panel, cutting parameters can be easily set, enabling highly precise, fully automatic cutting operations. A ductile cast iron machine body, strong transmission system, and servo feed technology ensure vibration-free operation and long tool life. CHK Series machines are engineered for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feed system • PLC-controlled automation system • High cutting accuracy and stability • Heavy-duty machine construction for industrial use Fields of Application • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supplier industry Standard Features • Precise cutting and smooth surface finish • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven feed system Lhodpfx Aeyq N Iwjqvog • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip cleaning brush • Pneumatic pressure control system • User-friendly operation with PLC control unit • Torque control system for extended blade life • Easy adjustment of vise pressure by material type Technical Specifications – CHK-100 Cutting Capacity (Round): Ø25 – 100 mm Cutting Capacity (Square): Max 75 × 75 mm Cutting Capacity (Rectangular): Max 90 × 70 mm Main Motor Power: 11 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø360 × 2.25 × 2.6 mm Blade Speed Range: 40 – 160 rpm Single Stroke Feed Length: 630 mm Bundle Material Feed Length: 3000 mm Trim Loss Length: 60 – 70 mm Machine Weight: 3800 kg

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Lhodpfxsy Smk Ts Aqvog Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Lsdpfsv If T Tox Aqvshg Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: 4000 x 800 mm Number of T-slots: 6 Lhjdpey Ttrtsfx Aqveg T-slot spacing: 140 mm Distance: Spindle lower edge min. 140 mm Table upper edge max. 740 mm Boring radius: min. 540 mm max. 1590 mm Travel range U-axis: 2600 mm Travel range Y-axis: 1050 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 400 mm Machining Data Drilling capacity in steel St 60: 40 mm Drilling capacity in cast iron GG 22: 50 mm Thread cutting: St 60: M 36 Thread cutting: GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 - 2800 min-1 Torque: max. 250 Nm Constant from: 15 - 200 min-1 Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW U-axis - AC servo motor: 2.50 kW Rapid traverse rates (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse rates (U/W): 7.5 / 3 m/min Feed rates, stepless: 5 - 2000 mm/min Feed force: 12000 N Accuracy Positioning accuracy X, Y-axis on 1200 mm: ± 0.075 mm Repeatability X, Y-axis: ± 0.03 mm Positioning accuracy Z-axis: ± 0.05 mm Repeatability Z-axis: ± 0.03 mm Positioning accuracy W-axis: ± 0.05 mm Repeatability W-axis: ± 0.03 mm Electrical Data Operating voltage / frequency: 400 / 50 V / Hz Control voltage: 24 V Total connected load: 13.0 kVA CNC Control Axes: 5 (X, Y, Z, W, U), expandable Display: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimension data absolute or incremental Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking and counterboring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - rectangular parts mounted in any way - round parts mounted in any way - determination of castings and forgings - angle detection in round parts by probing reference edges or surfaces Data interfaces: USB interface Painting (Repainting) Standard painting, two-component textured paint Machine upper part: light gray RAL 7035 Machine lower part: signal blue RAL 5005 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical components and safety devices

Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg Lhedpfx Aey Txlreqveg

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve Lhsdsrzakmspfx Aqvjg - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Lhodpfey S E U Rjx Aqvog Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Ljdpfern Riqox Aqvjhg Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, Year of construction: 1978, pressure 40 t stroke 8 - 50 mm no. of strokes 50 - 300 /min distance between columns 600 mm dayligth (stroke and adjustment up) 285 mm column travel -side 280 mm table surface area 590 x 500 mm hole in the table 590 x 40 - 100 mm table height over floor 860 mm ram surface 590 x 380 mm ram adjustment 80 mm material width 200 mm material thickness - 2,5 mm Ljdpfx Aqoy Rurcovjhg feed length 160 mm power requirement 7,5 kW dimensions of the machine ca. 1,8 x 1,2 x 2,1 mxmxm AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm Lodjylzw Hopfx Aqvohg table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication Ledpfxowc U Nlo Aqvehg electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min Lhsdpfx Aqjvuugcjvog dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm Lhedpfx Aovuucwoqvsg ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication, Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm Lodpjvuubyjfx Aqvshg stroke 22 - 96 mm no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm column travel -side 600 mm table surface area 1220 x 880 mm hole in the table 450 x 250 mm table height over floor 950 mm ram surface 1180 x 800 mm power requirement 22,0 kW weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting