Used Maka Table Milling Machine With Tilting Spindle for sale (69,861)

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Bdodpfoyy I R Rex Abtog Tilting spindle With table extension on both sides

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 Bodpfxozt Ai Eo Abtodg in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Bdsdpfx Abox D Tbmotsg YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Bsdpfxjxxb Rre Abtsdg Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Bjdszmukuepfx Abtodg

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Bdsdpshp Rcrjfx Abtog Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) Bsdpfx Aozuw Ixobtsdg - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, For sale is a used Felder F-900 Z milling machine with a tenon and groove table length of 1300 mm. The machine is used as an exhibit in our showroom and is therefore in like-new condition. Technical data: Bedpfxow Hfd Is Abtsdg - 5 milling speeds - Milling spindle can be swiveled 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenon and groove table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD start - Year of manufacture 2025 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° Bjdswp Ri Uepfx Abtjdg - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Bdsdpfjf Tdvbjx Abtsg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Bsdezuxn Tspfx Abtsdg Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 46 °, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: Bedpfxjwztr No Abtodg - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swiveling spindle milling machine, manufactured in 1996. This compact and robust milling machine features a milling spindle that can be swiveled up to 45°, several speed settings, and clockwise/counterclockwise rotation. The spindle adjustment is conveniently controlled via the side handwheel. Technical data: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Milling spindle swivels: up to 45° Clockwise/counterclockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, in condition appropriate for its age and well-maintained. The machine has a compact design and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! Bodpfx Abezxx Egjtjdg The machine is currently still at the customer's location. The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sale, and changes are subject to modification. All information is provided without guarantee.

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Bdedpfx Aox Dmnajbteg Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid wood and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different milling tools without any changeover times. Ideal for a wide range of milling tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW - Spindle diameter: 30 mm - Spindle centre distance: 600 mm - Speed settings: 3000/4000/5000/6000/8000/10000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, asking price €500 Bjdpfxszryrzj Abtodg - D-89440 Lutzingen, Tel. , Fax: , May 2015, cost price €1,000

Condition: used, functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, table width: 1,070 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 3,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: Bdodpfx Abew Ip Dmetsg – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 with SK40-S20x2, suitable for DECKEL milling machine FP1, FP2, FP3, or FP4 Maximum speed: 6000 rpm at 70% duty cycle Bodpfjfxg T Uex Abtedg Gear ratio: 1:6 Power transmission: up to 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: SK 40 - S20x2 Collets: Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in a wooden storage box The head is equipped with bronze gears for high torque. Weight: 5 kg Total weight: 9.4 kg in good condition

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale Bdedpfxed E A I Nj Abtsg - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: excellent (used), Year of construction: 2007, Tilting spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi Italy Bdedpfswudlyjx Abtsg Year of manufacture 2007

Condition: used, Cutter SCM Bdedpouzivpefx Abtsg

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Bdjdpfoxlzg Hjx Abtsg Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min Bdsdpfx Aswdta Ejbtsg feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, x-travel 2000 mm y-travel 1500 mm z-axis 3000 mm spindle diameter 100 mm table surface area 1.400 x 1.300 mm tool taper MK | dimensions 6,4 x 3,2 x 3,4 m Bdedjzmitdepfx Abteg weight of the machine ca. 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Bdodpfx Aboxrbihsteg Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Bdsdporzbktofx Abtog Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen