Used Mark Msa 15 for sale (20,701)

Condition: excellent (used), Year of construction: 2015, volume flow: 1.79 m³/h, pressure (min.): 10 bar, MARK MSA 15 screw compressor Mounted on 500 L pressure vessel Isdpfx Aoyui Acsdlotl With refrigeration dryer 15 kW motor Capacity: 1.79 m3/min Pressure: 10 bar Operating hours: 14,100 Compressor fully functional

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 S/N CAI857781 YEAR 2015 POWER (kW) 15 CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no Itodpfx Aeyi A Arjdlsl BUILT-IN DRYER yes HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED

Condition: excellent (used), Year of construction: 2013, volume flow: 2 m³/h, pressure (min.): 8 bar, MARK MSA 15 screw compressor 15 kW motor Capacity: 2.00 m3/min Pressure: 8 bar Year of manufacture: 2013 Net price: 8,500,- Gross price: 10,455,- Itsdpfjy Uwi Esx Adlsl Compressor is in fully working condition.

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Variable speed (inverter) Itodev A U I Ajpfx Adlel 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Fully functional compressor

Condition: good (used), Year of construction: 2021, S015464 MANUFACTURER: MARK MODEL: MSM 15 SERIAL NO.: ITJ514259 YEAR: 2021 POWER (kW): 15 CAPACITY (m³/min): 1.68 PRESSURE (bar): 10 OPERATING HOURS (LOAD/TOTAL): 948/1868 FREQUENCY INVERTER: no Itedpoyh Rx Nefx Adlol BUILT-IN DRYER: no

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Itedpfx Aoz A Avhodlsl Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM15D TM500 S/N ITJ874646 YEAR 2024 CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES Ijdpfx Ajvrcnvodlstl ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: A20611RM1, working width: 1,150 mm, feed rate X-axis: 3 m/min, type of input current: three-phase, sheet thickness (max.): 150 mm, overall weight: 3,900 kg, input voltage: 400 V, nominal power (apparent): 86 kVA, compressed air connection: 6 bar, input frequency: 50 Hz, workpiece width (max.): 1,150 mm, grinding width: 1,150 mm, height adjustment type: pneumatic, input current: 400 A, The COSTA MSA 2 CCCS 1150 is an industrial wide belt sander with three working units, designed for professional deburring, calibration, and superfine finishing of metal parts. It is intended for high productivity and excellent surface quality when processing steel, stainless steel, and aluminum. The machine offers adjustable speed, robust industrial design, central extraction, and the option for fine-tuning the working process to meet the needs of any metalworking company. Iedpfexugxaox Adletl

Condition: used, functionality: fully functional, operating hours: 1,616 h, total length: 584 mm, total height: 355 mm, total width: 330 mm, type of input current: AC, overall weight: 16 kg, Sales Description For sale is a Markforged Mark Two 3D printer, one of the leading professional fiber composite 3D printers for manufacturing high-strength functional parts. The printer is in good condition and has only 1,616 operating hours. Thanks to the ability to reinforce components with carbon fiber, Kevlar® (aramid), fiberglass, or HSHT fiberglass, extremely stable and durable components can be produced. Ideal for professional use in development, prototyping, mechanical engineering, motorsports, or the manufacture of fixtures and tools. The printer processes materials such as Onyx, Nylon White, PLA, and TPU, and offers a build volume of 320 × 132 × 154 mm. The scope of delivery includes numerous accessories and consumables:  Kevlar fiber  Fiber spools  Carbon fiber (already installed)  Dry box  Black PLA spools  New blue PLA spool  Print plate  Fiber load tubes  Fiber Bowden tube  Replacement nozzles  Torque driver  L-key set and other accessories Technical Highlights  Printing process: Fused Filament Fabrication (FFF) with continuous fiber reinforcement  Build volume: 320 × 132 × 154 mm  Materials: Onyx, Nylon White, Precise PLA, TPU 95A  Fiber reinforcement: Carbon fiber, Kevlar® (aramid), fiberglass, HSHT fiberglass  Tensile strength: up to 800 MPa (comparable to aluminum components)  Elastic modulus: up to 60 GPa  Precision print bed: flatness up to 160 μm  2nd generation extruder with material monitoring and out-of-plastic detection  WLAN connectivity (802.11 b/g/n)  Industrial quality for functional prototypes and durable end-use parts The printer is ready for immediate use and is suitable for both companies and ambitious users who want to manufacture high-quality, durable components. Isdpfezdnyqex Adlotl

Condition: used, functionality: unexamined, Wostor Euromarker basic 150 Isdew U Ir Nspfx Adljtl - Screw handle broken and slightly bent - Shipping possible at extra cost

Condition: used, functionality: unexamined, Year of construction: 1963, machine/vehicle number: 971W01002, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 400 mm, roller length: 3,000 mm, sheet thickness (max.): 15 mm, Used HAEUSLER KRMA 3000 x 15 rolling machine for sale. Iedpfx Ajzil Hfjdlotl Manufacturer: CHR. HAEUSLER AG, Switzerland. Working width 3000 mm, nominal thickness 15 mm, 380 V. Serial number 971W01002. The nameplate indicates the year 1963, as well as a revision/CE marking from 2003. The machine is designed for rolling and bending sheet steel. It is sold in its current condition, and on-site inspection is recommended. The machine is also equipped for bending profiles.

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Itodpfozb Dq Isx Adlol

Year of construction: 2009, condition: used, Second-hand machine Environmentally friendly thanks to the use of R404A Energy savings thanks to a rotary refrigerant compressor (20–30% more efficient than (compared to a conventional piston) intelligent drainage system Max. operating pressure: 13 bar compressed air output 5,200 l/min 7,312 m²/hour Motor power 1.58 kW, 230 V Max. inlet temperature 55 °C Itjdpfx Adezk Nrhslsl Dimensions: 557 x 460 x 789 mm Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 2013, volume flow: 7.7 m³/h, pressure (min.): 10 bar, Mark RMC 45 IVR screw compressor Variable speed (inverter-driven) 45 kW motor Capacity: 7.70 m3/min Pressure: 10 bar Year of manufacture: 2013 Itedpfx Adjzkmq Uslel Compressor is in fully working order.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: Itodpfx Ajd N Hguedlel - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Operating hours: 43,927 h, condition: good (used), FOBA Laser FOBALAS 94S Nd:YAG Laser Marking System FOBALAS F 94S Laser Marking System Itjdpsw U Timsfx Adlsl Laser Type: FOBALAS 100 CW/QS - ND:YAG Power Class 4 P max = 120 W 1,064 μm XY/2-100 HPM Type: Foba Voltage: 15 V Wavelength: 1,064 Operating Hours: 43,927 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2023, condition: ready for operation (used), A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible. Isdpfjzhw Tzox Adlotl

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Itodpoy H N Tmefx Adljl Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2017, operating hours: 20,300 h, functionality: fully functional, overall weight: 350 kg, total length: 1,110 mm, total width: 800 mm, total height: 1,110 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 2,970 m³/h, operating pressure: 10 bar, noise level: 65 dB, protection type (IP code): IP55, ALUP Allegro 15 – 15 kW variable speed screw compressor For sale: ALUP Allegro 15 industrial screw compressor with variable speed control. Thanks to the variable speed control, the compressor automatically adjusts its speed to the current compressed air demand. This makes it an energy-efficient solution, especially for fluctuating compressed air consumption. Specifications: Manufacturer: ALUP Type: Allegro 15 Isdpfx Asz Ahkmsdlstl Power: 15 kW Type: Screw compressor Control: Variable speed / variable speed Control system: ALUP air control 4 Condition: In good working order Professional industrial design Asking price: €4,250.00 (excluding VAT).

Condition: good (used), FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the "all-round laser" to permanently and sharply mark materials such as metals and plastics. The 1064 nm wavelength is well absorbed by many materials, making it suitable for annealing, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible, and precise marking. How it works: The laser beam creates a focused spot of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A color change of the material through heating. Color change: Creating a color contrast on the material. Material ablation: Removing material to create a depression. Details: Device: FOBA DP 15 Laser Marking System Laser Type: Fiber Laser Wavelength: 1064 nm Focus Length (f): 254 mm (equivalent to 10 inches) Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request! Iodpfx Asw U T Ebjdlotl

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,780 h, load capacity: 1,500 kg, lifting height: 6,780 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, battery capacity: 1,000 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, DGUV certified until: 09/2027, fork length: 1,200 mm, tire condition: 100 %, total height: 2,850 mm, Equipment: 3rd hydraulic function, CE marking, UVV, full service history, lighting, sideshift, Still RX 50-15 electric three-wheel forklift with the following specifications: * Lifting capacity: 1,500 kg * Lifting height: 6,780 mm * Overall height: 2,850 mm * Operating hours: 6,780 * Year of manufacture: 2015 Still 1.5-ton electric three-wheel forklift, open cabin, brand new battery, new tires, triplex mast with full free lift, side shifter, mini-lever, fork length 1,200 mm, new charger. Upon request, the following option is available at an additional cost: white, non-marking new tires (see photo). Includes 1,000 hours of service according to Still manufacturer’s specifications and a valid UVV inspection upon sale. Itedjz A H Hwopfx Adljl Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial customers; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). Further information and offers can be found on our website.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1024610, Paolo Orizio S.p.A. small-diameter circular knitting machine, model TBE/C, machine number 1024610, year 1999. Made in Italy. CE marked. ORIZIO PLATE DATA: · Diameter: 15 inches · Needles per inch: 24 · Number of needles: 1120 · Number of feeders: 4 · Cylinder number: 3-9-286-A · Needles: VO 7950 G0011 · Year: 1999 · CE marking REBUILT BY CANMARTEX IN 2012. The machine has a second plate from CANMARTEX CATGRUP S.L. (Dosrius, Barcelona) with serial number OR610 and marking R2012, corresponding to its rebuilding in 2012. CANMARTEX manufactures circular knitting machines under the Jumberca brand and is located one hour from the current location, making technical service and spare parts still accessible. CANMARTEX PLATE DATA: · Power: 5.5 kW · Frequency: 50/60 Hz · CE marking ORIZIO ELECTRICAL PLATE DATA: · Line voltage: 380 V, 3 phases · Frequency: 50/60 Hz · Full-load current: 16 A · Breaking power: 260 A APPLICATION: Small diameter with 4 feeders: cuffs, collars, ribbons, and finishing for knitted garments. POWER SUPPLY: 50/60 Hz. Both plates indicate 50/60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. Itodpfezvm Dxjx Adlol EQUIPMENT: · Orizio touchscreen panel with "Yarn Storages" management · Igecom counter with USB port · Control column with start/stop buttons · Complete upper fillet LUBRICATION: Oil indicated on the plate: Optimol Optigear 5150 / Shell Omala 220. Oil change every 2,000 operating hours. CONDITION: Complete and assembled machine. A visit can be arranged for on-site inspection and operating test. DIMENSIONS AND TRANSPORT: · Location: Albacete, Spain.

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: EK210083, total length: 1,500 mm, total height: 2,250 mm, total width: 2,000 mm, pressure: 200 bar, type of input current: three-phase, empty load weight: 250 kg, input voltage: 400 V, fuel: electricity, input frequency: 50 Hz, EKINSA LAVA GRG industrial automatic washing machine, model ET115, year 2021, designed for cleaning the interior and exterior of GRG/IBC tanks. It features an automatic interior washing system with a rotating head and nozzles, as well as an exterior washing system. It can operate in manual and automatic modes via an HMI screen. It includes a water tank with level control, thermostat, and heating elements. Itedszy Ni Sspfx Adlol Electrical supply: three-phase 3×400 V + N, 50 Hz. Power rating as specified by the manufacturer: 15 kW. Manufacturer: EKINSA Model: ET115 Reference: ET115.21-50.E1 Serial number: EK210083 Year: 2021 CE marking.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 905312, functionality: fully functional, cutting height (max.): 2,150 mm, cutting width (max.): 4,150 mm, saw blade diameter: 250 mm, overall weight: 850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. vertical cutting height: 2,150 mm Max. cutting width: 4,150 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Vertical cutting: Yes MACHINE DETAILS Isdpfx Adozzbb Ajlstl Voltage: 380 V Current consumption: 6 A Power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 1,350 x 2,830 mm Weight: 850 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment. Itjdpfxsu Itk Re Adljl