Used Morello Forni Fgri 150 for sale (9,958)

Condition: new, External dimensions: 2300 × 2450 × 2340 mm FGRi series Finish: Mosaic Dome Energy source: wood and gas Total gas power: 43 kW Natural gas consumption: 4.6 m³/h LPG consumption: 3.4 kg/h Gas connection: 3/4” G Capacity: 14 pizzas Ø 30 cm Productivity: 240 pizzas/h Motorized rotating hearth Variable speed and direction Two independent gas burners Separate vault and hearth heating Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation: bricked shell External finish: Mosaic Dome Dual manual/automatic mode Manual mode with flame modulator Analog thermostatic controls (optional) Unassembled shipping: not available Mouth width: 820 mm Net weight: 4000 kg General presentation The FGRi150 Coupole Mosaïque is a hybrid wood & gas rotary oven intended for pizzerias, Italian restaurants, franchises, and catering establishments that want to combine high cooking capacity with an elegant presentation. With its Mosaic Dome finish, it is suitable for locations where the oven is visible and contributes to the image of the concept, while maintaining the performance of the largest FGRi format. Bodpfx Aozabf Tobtjll Why this model stands out This oven cooks 14 pizzas Ø 30 cm and achieves a stated production of 240 pizzas/h. It can operate on wood alone, gas alone, or in a combined wood + gas mode. Its gas-heated, motorized rotating hearth, with variable speed and direction, helps to distribute cooking over a large surface area. The two independent burners, dedicated to the vault and the rotating cooking surface, promote thermal stability when batches are cooked consecutively. Key advantages High capacity of 14 pizzas Ø 30 cm, suitable for high volumes. Stated production of 240 pizzas/h for peak service times. Hybrid operation: wood alone, gas alone, or wood + gas. Gas-heated rotating hearth for even cooking. Mosaic Dome finish with insulating shell and decorative cladding. External drawer for ash disposal and collection.

Condition: new, -Dimensions: 2000 × 1870 × 1940 mm -New oven, never used, but a showroom model -Serial number: 0054.2015 -Year: 27-04-2024 -MRe Standard range -Energy: wood + electric sole -Capacity: 10 pizzas Ø30 cm -Productivity: 170 pizzas/hour -Electric power: 8.5 kW -Wood power: 35 kW -Combustion air: 173 m³/h -Flue gas temperature: 110 °C -Rotating sole with variable speed -Rotating sole with variable direction Bedpjzlp Iljfx Abtoll -Sole heated by electric resistors -Wood firebox on the left as standard -Wood firebox on the right (optional) -External ash collection drawer -Inteltouch System touchscreen interface -Dual manual / automatic mode -Three programmable cooking programs -Analog thermostat controls (optional) -Sorrentino stone for bread or pizza (upon request) -Exhaust diameter: 250 mm -Mouth width: 650 mm -Net weight: 2250 kg -Key benefits Motorized rotating sole with variable speed and direction to improve cooking uniformity. Electric heating under the sole to enhance the thermal stability of the cooking surface. Capacity of 10 pizzas Ø30 cm, suitable for regular service and peak activity. Lateral wood firebox with door, standard on the left and available on the right as an option. External ash drop and collection drawer to simplify maintenance and preserve cleanliness during cooking. Inteltouch System touchscreen as standard, with automatic / manual operation and programmable cooking programs. Large natural stone shelf to facilitate cooking movements in front of the oven mouth.

Condition: new, -Dimensions: 2000 × 1870 × 1940 mm Bodpfezlg T Sox Abtsll -Four, new, never used, in original packaging -MRe Standard range -Energy: wood + electric sole -Capacity: 10 pizzas Ø30 cm -Productivity: 170 pizzas/h -Electrical power: 8.5 kW -Wood power: 35 kW -Combustion air: 173 m³/h -Flue gas temperature: 110 °C -Rotating hearth with variable speed -Rotating hearth with variable direction -Hearth heated by electric resistors -Wood-fired oven on the left (standard) -Wood-fired oven on the right (optional) -External ash collection drawer -Inteltouch System touchscreen interface -Dual manual/automatic mode -Three customizable cooking programs -Analog, thermostat-controlled controls (optional) -Sorrentino stone for bread or pizza (upon request) -Exhaust diameter: 250 mm -Mouth width: 650 mm -Net weight: 2250 kg -Key advantages Motorized rotating hearth with variable speed and direction to improve baking uniformity. Electric heating under the hearth to enhance the thermal stability of the baking surface. Capacity of 10 pizzas Ø30 cm, suitable for regular service and peak activity. Lateral wood-fired oven with door, on the left as standard and available on the right as an option. External ash drop and collection drawer to simplify maintenance and preserve baking cleanliness. Inteltouch System touchscreen as standard, with automatic/manual operation and customizable cooking programs. Large natural stone shelf to facilitate baking operations in front of the oven opening.

Year of construction: 2026, condition: new, functionality: fully functional, Wood/gas-fired pizza oven with rotating stone, Ø150 cm: MARANA FORNI RotoForno SUeGIU series – RAL 130 brushed Mixed wood/gas fuel Bodpfezt Rhcsx Abtoll MARANA Forni gas system Capacity: 18 pizzas Ø290 or 13 pizzas Ø330 mm Cooking surface Ø1500 mm Rotating and liftable SUeGIU stone Micro-perforated stone surface High-density refractory stone Stone density: 3200 kg/m³ Thermal recovery: 40 to 100 °C Dome cladding RAL 130 brushed included RAL color to be specified Smooth black granite finish included Mouth width: 600 mm Stone height: 1200 mm Smoke outlet: Ø200 mm Right (DX) or left (SX) opening Thermostat with 5 flame levels Removable C-shaped door included C-shaped door used during heating Backup Patch console included Rotation maintained via Patch console Front support cover panels included Dimensions vary by approximately ±2% Dimensions: 2200 x 2200 x 2050 mm Weight: 2170 kg

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Blsdozxrd Aepfx Abtsl

Condition: good (used), Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line Blodpfxozw T Dho Abtjl This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – LUL-HM manual feeder connector – DBM-150 stitching and folding unit – stitching and folding in one unit – DBM-150T front trimmer – Long outfeed table – Built-in stacker for stacking sheets. The machine includes documentation, small parts, etc.

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Bsdpfezw Ragox Abtoll Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Bledpfszxg Snsx Abtol

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs Blodszww A Iepfx Abtel - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Year of construction: 2002, condition: good (used), machine/vehicle number: 90996-1, Pizza electric oven Brand: Moretti Forni Rialto, type RHC / 18 CZ Year of manufacture: 2002 Serial number: 90996-1 Pizza oven frame support on rollers. The oven has 3 chamotte Thermal insulation electric oven 1 pizza room of 12 pizza Ø 30 Fibreglass insulation Viewing windows emergency stop Digital display Digital temperature display Digital control unit Heat resistant materials Athermal door handles Baking surface made of special cotton wool under the effect of heat Adjustable temperature Temperature: 400 ° C constant temperature (even with frequent opening) connection Power: 9.3 kW Electrical connection: 3 / N / PE 400 volts / 50 Hz Blodpfxjg H Tlzo Abtjl Size: Oven external dimensions: L x W x H: mm 1600x1350x650 Oven interior dimensions: L x W x H: mm 1300x950x180 Dimensions of the structure on rollers: L x W x H: mm 1600x1150x900 Total external dimensions: L x W x H: mm 1600x1350x1550 Price: 1,600 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. We reserve the right to make mistakes, modifications and prior sale. You can make us a firm offer if you are interested in this pizza oven. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Blodjy Ez Erepfx Abtel Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Blsdpfxeza Eips Abtjl Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in fully functional condition, ideal for bakeries, pizzerias, pastry shops or large gastro operations. Thanks to the design with simultaneous rotation of the bowl and spiral, the dough does not overheat and develops gluten perfectly. Technical parameters: Blsdpfxszwm Dhj Abtsl Maximum dough capacity: 80 kg Bathroom volume (bowl): 127 liters Minimum mixing: approx. 6 kg Power supply: 3 x 400 V (three-phase current) Safety: Protective cover with safety microswitch (the machine stops immediately when lifted).

Condition: ready for operation (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of delivery includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,000 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight/piece: approx. 10.000 kg The CS Sigma profiles may be bent or have slight damage or signs of rust. Our services at a glance: (Prices upon request) Assembly and installation Please note our general assembly conditions. Rack inspection Rack inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all racking systems. Bledegfbytepfx Abtjl Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the leveling plate: Manufacturer: Bito PRO Included in the scope of delivery: 1x Leveling plate, used Suitable for the base plate M; which is mounted on the shelf uprights P4-P6 Material color: Sendzimir galvanized Overall width: approx. 150 mm Overall depth: approx. 105 mm Material thickness: approx. 4.00 mm Bledpfx Absi Hkngstjl Hole spacing (center to center): approx. 120 mm Weight: approx. 0.46 kg | piece

Condition: ready for operation (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Bsdpfsgfbyzsx Abtoll Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of supply includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,200 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per piece: approx. 10.500 kg The CS Sigma profiles may be bent and/or have slight damage or signs of rust. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the compensation plate: Manufacturer: Bito (M) Included in the scope of delivery: 1x compensation plate, used Material color: Sendzimir galvanized Overall width: approx. 150 mm Bsdsi Hknkjpfx Abtell Overall depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center-to-center): approx. 120 mm Weight: approx. 0.18 kg | per piece

Condition: good (used), Technical specifications of the pallet rack beam: Rack system: Bito Type: PRO Included in the scope of supply: 01x pallet rack beam, used Bljdpfx Abow Eu Dnstol Material color: blue Beam type: PT150S Box section: 150 x 50 mm Connector: 5 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg (with evenly distributed load) 02x safety pins, used Version: fully galvanized For securing the beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or dispatch of this item beyond this is subject to additional costs, which can be individually requested from us depending on the delivery location or scope of delivery.

Condition: good (used), We are offering a used shelf connector for sale. The scope of delivery includes: 01x Used shelf connector Material color: Sendzimir galvanized Shelf spacing: approx. 150 mm Profile: approx. 35 x 25 mm Weight/piece: approx. 0.214 kg/piece 02x Hex head screws, M10 x 35 Bjdod Tyhvjpfx Abtjll 02x Hex nuts, M10 02x Washers, M10

Condition: refurbished (used), Pressure: 150t Blsdpfsgd H Tpjx Abtsl Length of Stroke: 140mm Table size: 510x530mm

Condition: used, Year of construction: 2005, Mondial Forni , Omega, bakery single pocket divider. Type: Omega; electric connection: 380 V; total dimension L: 650 mm; total dimension W: 2250 mm; H: 2000 mm; 650kg Description: heavy duty quality Bjdpfxoxuh Ice Abtell Price excluding tax and shipping costs.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 50 h, power: 21.8 kW (29.64 HP), input voltage: 400 V, type of input current: three-phase, overall weight: 358 kg, fuel type: electric, Equipment: CE marking, documentation/manual, For sale: Moretti Forni TT98E industrial tunnel oven / conveyor pizza oven A professional Moretti Forni TT98E electric tunnel oven in excellent condition is for sale. Ideal for pizzerias, bakeries, fast-food restaurants, and large-capacity food production facilities. Key specifications: Manufacturer: Moretti Forni (Italy) Model: TT98E Year of manufacture: 2023 Power supply: 400V, 3 phases Power: 21.8 kW Weight: 358 kg Digital control and programmable baking parameters Stainless steel construction Industrial design for continuous operation Advantages: ✔ Consistent baking results ✔ High productivity ✔ Easy operation with touchscreen control ✔ Reliable Italian quality ✔ Energy-efficient operation ✔ Ready for immediate use Bledpfxezrncne Abtjl The oven has been used very little (approx. 50 hours of operation) and is in fully functional condition. An excellent choice for expanding capacity or starting a new business. Price: 4,690,000 HUF + VAT / or negotiable.

Condition: excellent (used), For sale: a Rietschle VFT 40 (111) vacuum pump, manufactured by a reputable German company. This unit is designed for industrial applications requiring vacuum generation, including packaging machines, printing machines, woodworking machines, CNC machines, and vacuum-based transport systems. The pump is equipped with a three-phase Flender ATB-Loher motor with a power of 1.5 kW and is mounted on a robust mounting plate. Technical specifications: Manufacturer: Rietschle Model: VFT 40 (111) Year of manufacture: 1996 Country of manufacture: Germany Type: vacuum pump Performance: 40 m³/h (50 Hz) Blodpfjziw N Sex Abtel 48 m³/h (60 Hz) Maximum vacuum (ultimate pressure): 150 mbar (abs) Motor power: 1.5 kW (50 Hz) / 1.8 kW (60 Hz) Rotational speed: 1420 rpm (50 Hz) 1680 rpm (60 Hz) Power supply: 3×400 V Motor protection class: IP54 Serial number: 1749048 Condition: Used. Visual condition is consistent with the photos. Robust construction, ready for further operation.

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. Bodpfx Absziwnnetell The machine is sold in the condition shown in the photos.

Condition: used, Year of construction: 2003, machine/vehicle number: 7190, functionality: fully functional, power: 333 kW (452.75 HP), input voltage: 400 V, input current: 70 A, type of input current: three-phase, temperature: 920 °C, total length: 10,700 mm, total width: 4,250 mm, control type: PLC-controlled, fuel type: gas, Equipment: CE marking, documentation/manual, We offer this used CIEFFE FORNI INDUSTRIALI S.P.A. continuous roller oven, model FORNO CONTINUO A RULLI, manufactured in 2003. Serial number: 7190 Year of manufacture: 2003 Heating type: Gas Total power: 48 kVA Rated voltage: 3 x 400 V Bledszq Eblepfx Abtol Rated current: 70 A Gas heating power: 333 kW Line protection: 63 A Power supply line protection: 40 A Control voltage: 230 AC V Control voltage: 24 DC V Maximum temperature: 920 °C If you have any questions or require further information, please do not hesitate to send us a message or call us.