Used Mwm-Energy Solutions Tcg2020 V20 for sale (7,123)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Pgedpfx Aez D Ihfjlwet

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, For sale: complete MWM / Deutz TCG 2016 V16 CHP system, electrical power approximately 800 kWe. The system will not be sold in its current, used condition. Delivery will only take place after a complete overhaul, technical inspection, and testing by CHP Solutions. The photos show the system in its current condition, before the overhaul. After an order is placed, the system will be technically overhauled and made ready for sale. The CHP system consists of, among other things: - MWM / Deutz TCG 2016 V16 gas engine - Electrical power approximately 800 kWe - Marelli generator, 1,300 kVA - 400 V / 50 Hz - TEM Evolution control system - Complete gas supply system - Generator switchgear, 1,600 A - Heat recovery system - Flue gas cooler / condenser - Complete skid and installation package Pgedjz E A Rwspfx Alwet Delivery as a complete solution is possible. In addition to supplying the overhauled CHP system, CHP Solutions can also handle transport, installation, and technical installation on-site, if desired. Depending on the project, we can provide support with: - Dismantling and transport - On-site installation - Mechanical connections - Gas supply connections - Heat connections - Electrical connections - Commissioning and test run

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: E-1579, total length: 3,000 mm, total height: 2,450 mm, overall weight: 5,400 kg, total width: 1,800 mm, rotational speed (max.): 900 rpm, THM TQZ1200 Shredder – Year 2017 THM TQZ1200 shredder for recycling and material processing applications. The machine performs the shredding process using rotating accelerating elements and is designed for integration into processing and recycling plants. Key technical features: Manufacturer: THM Recycling Solutions Model: TQZ1200 Year of manufacture: 2017 Machine number: E-1579 Main motor power: 90 kW Electrical supply: 400 V / 50 Hz Impact head speed: 900 rpm Internal diameter of the working chamber: 1,200 mm Height of the working chamber: 1,210 mm Accelerating elements: chains Approximate dimensions: 3,000 × 1,800 × 2,450 mm Approximate weight: 5,400 kg Working hydraulic pressure: approx. 130 bar Hydraulic tank capacity: approx. 100 l Robust industrial machine designed for integration into processing and recycling lines. Pedpsz Erxwjfx Alwsgt Technical documentation available. For more information, photographs, or technical documentation, please contact us.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Pedjzhg Eyepfx Alwsgt Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet Pgsdpfszhudwex Alwjt

Condition: used, Year of construction: 2020, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2215770, type of input current: three-phase, power: 1,030 kW (1,400.41 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 12,520 kg, type of cooling: water, nominal power: 999 kW (1,358.26 HP), input frequency: 50 Hz, input current: 1,442 A, empty load weight: 11,730 kg, temperature: 25 °C, ambient temperature (max.): 25 °C, Equipment: documentation/manual, We are offering this Caterpillar 2020 combined heat and power (CHP) unit, manufactured in 2020, complete with gas cooling, gas control system, and oil tanks. Podpfjzwqczox Alwjgt Manufacturer: MWM Serial number: 1655973 Date of manufacture: 06/2020 Rated power: 1030 kW Rated power factor: cos phi 1.0 Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 1442 A Weight: 11730/12520 kg Performance class: G2 Fuel: Biogas Standard: ISO 8528-5 Made in: Germany If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. The maximum printing format is 1150 x 990 mm. Pjdezq Eg Uepfx Alwjgt

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – and enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1015 C M Y K LC LM + White Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) Pgjdpfx Aod Ew A Uelwst A1+ size 100x150 cm and 70 mm printing height possible 7 x 500 ml ink can be supplied (additional cost) + VARNISH FUNCTION POSSIBLE Software settings and printer explanations available on request, throughout Germany/Europe (additional cost). Printing videos, etc. can be sent by email/WhatsApp.

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW Pgedpfez Dwl Hsx Alwet

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine. Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. Psdsxd Ubnopfx Alwjgt ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Podpfxoydqlqs Alwogt Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: new, Year of construction: 2022, functionality: fully functional, ABB B23 112-10E – Three-Phase Energy Meter Lot of 100 ABB B23 112-10E energy meters. The meters are new and unused and are supplied in their original packaging. Ideal for industrial installations, electrical panels, energy monitoring, and larger projects. Product details: Pjdpez Aryfefx Alwogt Manufacturer: ABB Model: B23 112-10E Article No.: 2CMA104350R1000 Active energy: Class B 3-phase 3x220/380 – 3x240/415 V 0.25–5(65) A 50/60 Hz 1000 imp/kWh Made in Italy Quantity offered: 100 pcs Condition: New / unused Larger quantities are available in stock. Please contact us for pricing on larger quantities. Location: Rotterdam, The Netherlands Condition: New / unused Worldwide shipping is possible. SURPLUS – Industrial Solutions From Surplus to 2nd Life

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Pgsdpen Ut Hcefx Alwjt

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring Pgsdpfx Aozlg Ngolwjt • Portable MPG handwheel • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: used, Year of construction: 2021, Technical details: Pjdpsy N R Hmjfx Alwogt voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Pgedpfx Alowp Ac Hjwst Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. Psdpszzlqnsfx Alwogt The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable. Pedpfxjyffqqs Alwsgt

Year of construction: 2000, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 071, Stock no. 2806 Pjdpfx Ajz A R Ilelwogt 1 used, partially overhauled, and functionally tested strand granulator Type SG-60 E Cutting rotor with single-sided bearing Rotor diameter 160 mm x width 70 mm Rotor with helical cut, 30 teeth, 2° Strand inlet width: 60 mm Up to 12 strands according to the manufacturer Cutting chamber with sound insulation 2.5 kW - AC drive, adjustable via frequency inverter Ready for demonstration at our plant in Wuppertal We have other strand granulators ready for demonstration. Please inquire about our current machine stock list.

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Pgedpezhlr Esfx Alwet Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,661 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, Equipment: chip conveyor, rotational speed infinitely variable, Vertical CNC machining center Control: FANUC F0MF+ Accessories: Psdpfx Aszcpgwslwegt Chip conveyor, hinged belt type, manufactured by Cromar CNC AutoDoor

Condition: excellent (used), Year of construction: 2023, operating hours: 4,600 h, functionality: fully functional, machine/vehicle number: 023-02-0021-WSXXL II CE12, overall weight: 3,500 kg, type of input current: AC, input voltage: 120 V, table length: 700 mm, table width: 400 mm, total height: 2,380 mm, total length: 2,450 mm, total width: 1,460 mm, laser wavelength: 1,064 nm, Equipment: type plate available, Photon Energy Workstation XXL II CEPHEUS Mark12 – UKP/Picosecond Laser System For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. This system is particularly suitable for operators of existing Photon Energy/Hitachi systems, medical technology companies, laser marking service providers, or companies with a need for UDI-compliant, permanent marking. Key data: Year of construction/manufacture: February 2023 Operating hours: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: under 15 ps Repetition rate: 20 to 500 kHz Cabinet dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 rotary axis available PHOTONmark, PUC/UDI Control, CamVisionPro and hand scanner available Last maintenance: June 2026 Condition: very good Inspection and test run possible by appointment Podpfx Ajzxrv Eelwegt Without exhaust system, as a central exhaust system is used at the current location. The reference point limit switches in the X, Y, and Z axes have already been converted to proximity switches. The system is financed through a lease. Sale, buyout, direct settlement, or transfer of the contract will be arranged in coordination with the financing partners involved. Sale exclusively to commercial operators/companies. No warranty; liability for defects is excluded in the purchase contract to the extent permitted by law. The system will be delivered in working order with installed control and marking software as well as the activated options. Customer-specific jobs/production programs, article, serial number, UDI and process data will be deleted before handover for data protection and confidentiality reasons. According to the manufacturer, it is generally possible to partially upgrade or modify the machine according to needs. The type and scope of such a modification must be agreed upon by the buyer directly with the manufacturer or service partner and is not part of this sales offer.

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, functionality: fully functional, turning length: 600 mm, turning diameter: 230 mm, spindle motor power: 22 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 50 rpm, bar passage: 65 mm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 8,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​8-axis CNC lathe "DN Solutions mod. PUMA TT1800SY" with motorized upper turret equipped with Y axis, motorized lower turret, opposing spindles and DN Solutions-Fanuc i-Plus iHMI CNC. Pgjdpfx Alewuqp Eowst

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Pjdpozu Nxisfx Alwogt Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EY-14P-SA Perkins, overall weight: 425 kg, fuel type: diesel, tank capacity: 55 l, color: green, power: 11.84 kW (16.10 HP), output current: 19 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.4 kW (15.50 HP), nominal power (apparent): 14 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,580 mm, total width: 700 mm, total height: 1,050 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, additional equipment features: Perkins, Energy EY-14P-SA Perkins diesel generator. The Energy Generator EY-14P-SA is a robust 13 kVA Perkins diesel generator from Aggragaat.store/Van Delft Staal, perfect for use during power outages, construction projects, or as an emergency power supply. This modern Perkins diesel generator provides stable power with low fuel consumption. Thanks to the integrated AVR technology (Automatic Voltage Regulation), the voltage remains constant, which is essential for the safe use of sensitive electrical equipment. The EY-14P-SA combines power, silence, and durability in one compact solution. Electrical Power: 13kVA, 10.4kW PRP; 14.3kVA, 11.4kW LTP, 400/230V three-phase, 50Hz, 1500 rpm. Pgedoy S Tdmopfx Alwot Configuration: Diesel engine: Perkins 403A-15G1 (non-emission); Alternator with automatic voltage regulation (AVR); Version with weather and soundproof canopy RAL 9010 (light grey); Fuel leakage protection basin and residential muffler (noise level 70dB +/- 3 at 7 meters); Automatic mains failure panel (AMF) with full power terminal box, magnetothermic switch, battery charger, and electronic board. Advantages of the EY-14P-SA: Power: 13 kVA / 10.4 kW PRP Power: 14.3 kVA / 11.4 kW LTP Clean and efficient 1500 rpm AVR system for constant voltage Low-noise, easy-to-maintain diesel engine Ideal as a generator during power outages or as a mobile power source Color: RAL 6017, bottom side dark grey RAL 7012 Optional plug unit 400V 32A, 63A, and 220V 16A, additional cost: €500. Also available for all your maintenance and repair needs. In stock.