Used Myrkos Dga for sale (46)

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm Hnodjzcmbljpfx Acher 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Condition: used, Year of construction: 2007, 410 mm Hodpfeztft Tox Achsnr 430x410 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat 700x410 mm 410 mm 500x410 mm 320 mm 320x410 mm dimensions of saw-band 5800x41x1,3 mm total power requirement 5,5 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. 3500x2800x2000 mm

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm Hsdpfx Aszdu Uzschenr dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Hjdpfx Aozibdtjchsnr Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm Hnedpfxsulnb Ds Achsr - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, functionality: fully functional, input voltage: 400 V, roller diameter: 355 mm, overall weight: 640 kg, Equipment: CE marking, Semi-automatic band saw for cutting at angles from -45° to +60°. Stepless cutting speed and hydraulic vice ensure operator comfort. This model features a robust construction allowing for precise cutting of profiles, solid material, stainless steel, etc. Cutting capacity up to 530 mm. Key features: - Stepless adjustment of blade speed (20 / 70 m/min) - Blade guides equipped with special carbide plates and bearings for high cutting precision - Equipped with semi-automatic mode, ideal for series production - Ability to select cutting mode: manual or semi-automatic - Quick-release vice adjustable manually or hydraulically - Saw arm tilting range from -45° to +60° with scale indication - Fully professional machine with an excellent price-to-quality ratio - Solid construction guarantees accurate and quiet, vibration-free operation - Optimal power transmission thanks to a precise worm gear system - Saw arm adjustment via hydraulic cylinder Semi-automatic operation: - Hydraulic clamping vice - Hydraulic saw arm lowering - Saw arm lifting Technical specifications: Cutting range round 90°: 355 mm Cutting range flat 90°: 530 x 300 mm Hnjdpfx Asyt Huaechor Cutting range square 90°: 300 x 300 mm Cutting range round 60°: 240 mm Cutting range square 60°: 170 x 170 mm Cutting range round 45° right: 355 mm Cutting range flat 45° right: 360 x 290 mm Cutting range square 45° right: 290 x 290 mm Cutting range round 45° left: 300 mm Cutting range flat 45° left: 270 x 270 mm Cutting range square 45° left: 270 x 270 mm Working height: 965 mm Cutting speed: 20 - 70 m/min Band saw blade dimensions: 3770 x 34 x 1.1 mm Blade width: 34 mm Coolant pump motor power: 0.1 kW Motor power: 3 kW Motor power S1 100%: 2.2 kW Voltage: 400 V Dimensions (W x D x H): 2200 x 1400 x 2050 mm Weight approx.: 640 kg Scope of delivery: - Band saw - Workpiece stop - Blade tension gauge - Quick-release vice - Coolant system - Hydraulic cylinder - Emergency motor stop - Automatic end switch - Base

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm Hnodpfxjwf Hm Ij Achjr • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring Hnsdpfx Acox Sr Drehjr - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Hnedpsh S Nxdefx Acher Automatic material feed Bevel cutting on both sides Compact design Precise material positioning through servo positioning technology Innovative electric sawing feed with ball screw: Highest cutting performance and quality, while being gentle on the saw blade Unique and patented double bevel system: Material is always clamped at a right angle Cutting range in mm 90°: approx. 335 (round), 500 x 335 (flat) 45° right: approx. 330 (round), 320 x 335 (flat) 45° left: approx. 305 (round), 305 x 335 (flat) 30° right: approx. 180 (round), 170 x 335 (flat) Remaining piece length without bundle tension, min. Manual: 80 mm Automatic: 300 mm Automatic cutting pressure and feed monitoring Frequency-controlled AC drive 15-150 m/min Hydraulic material full-stroke clamping Automatic movement of the clamping cylinders Minimum speed and saw blade monitoring Electric bevel swivel via servo motor Visualized program input with CNC control Material feed via servo-controlled ball screw drive The following options are recommended: Micro-spraying device Clamping pressure regulator Mounting elements

Year of construction: 2002, condition: excellent (used), Gas burner Weishaupt G5 1-D – Version: ZMD-LN Output: 160-830 kW Year of manufacture: 2002 Includes existing Dungs DN65 fittings. Hjdpfxef S A Nze Achjnr Мы говорим по-русски! Viewings are possible by prior telephone arrangement only. Preferred sale to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also handle all formalities. Loading is possible.

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer. Hodpfozkt Rzjx Achsnr

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm Hedpfjzh H R Ajx Achonr ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation Hodpfxjzubtle Achjnr • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, mileage: 85,000 km, power: 100 kW (135.96 HP), first registration: 12/2020, fuel type: gas, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 19 m³, loading space length: 4,200 mm, loading space width: 2,060 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Special equipment: Storage compartment on the dashboard with USB connection, dashboard comfort features, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, vehicle key with remote control, rear axle suspension: parabolic (reinforced, level 2), programmable speed limiter, steering column (steering wheel) adjustable in height and length, smoker's package, spare wheel in driving condition, seats in the cab: driver's seat comfort (hydraulic). Additional equipment: Airbag on driver's side, trailer stabilization program (TSM), trailer socket preparation, anti-slip regulation (ASR), dashboard comfort blue, design: Blue Power, design: S-series, exterior mirrors electrically adjustable and heated, brake assistant, electronic brake force distribution, front axle suspension: transverse leaf spring, windshield and side windows tinted, generator 210 A, speed limiter 160 km/h, body/superstructure: standard platform, fuel tank: 70 liters, radiator grille blue, engine 3.0 liters - 100 kW CNG, wheelbase 4100 mm, low emissions according to emission standard Euro 6d, seats in the cab: double passenger seat, maintenance indicator, permissible total weight 3.50 t. The vehicle is in good condition! Load compartment interior: L 4.20 m W 2.06 m H 2.30 m Payload 350 kg Hnsdpfxszlpqao Acher Tail lift: Hollandia 500 kg Side door New TÜV and emissions test available for an extra charge. Financing possible through Santander Bank.

Condition: used, mileage: 1,00,700 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,270 kg, maximum load weight: 940 kg, first registration: 12/2020, loading space length: 1,600 mm, emission class: euro6, color: blue, number of seats: 5, Year of construction: 2020, - Used Truck: Ford Ranger 5-seater Limited 4WD with Tow Hitch. - Registration: December 2020, Engine: 2.0 TDCi 170 hp Euro 6d, Automatic transmission, Mileage: 100,700 km. - Double-cab pickup with 5 seats, 4WD all-wheel drive with electronic selector for low range, 3 operating modes: 2WD / Fixed 4WD / Low-range 4WD, and Tow Hitch. Cargo area of 1,600 mm, with protective lining and manual roller shutter closure. - Limited trim level, equipped with: Automatic climate control, Leather seats, SYNC 2.5 Touchscreen with Bluetooth, USB, Apple CarPlay, and Android Auto, Front/Rear sensors and Rearview parking camera, Black 17-inch alloy wheels, Keyless entry and start, Fog lights, LED daytime running lights and Xenon headlights, Cruise control, Lane keeping assist, Anti-collision braking, Road sign recognition, On-board computer, Two keys, Spare wheel. - Bodywork and interior in excellent condition, mechanics with a 12-month dealer warranty. - All-Terrain tires, front and rear, 85% tread. Valid inspection until February 2027. - Unique vehicle – single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy, opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified mileage. - Test drive possible by appointment. - Transfer of ownership can be arranged on-site. - Customized financing options available. Carlo Mauri S.r.l. disclaims all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual commitment. The prices quoted are exclusive of VAT and transfer of ownership costs. Hnodpjy S Dgrefx Achjr

Condition: used, mileage: 10,671 km, power: 100 kW (135.96 HP), first registration: 08/2019, empty load weight: 2,957 kg, maximum load weight: 2,243 kg, overall weight: 5,200 kg, tire size: 225/75R16, axle configuration: 4x2, color: silver, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 4 m³, loading space length: 4,870 mm, loading space width: 2,080 mm, loading space height: 400 mm, front tire size: 225/75R16, rear tire size: 225/75R16, Equipment: ABS, cruise control, electronic stability program (ESP), onboard computer, traction control, trailer coupling, Iveco Daily 50C14NP Natural Gas - Open flatbed - Twin tires - Without tachograph - Trailer hitch - Driver and passenger airbags - Central locking with remote control - Manual transmission - 3 seats - Electric windows and mirrors - Active cruise control - Lane assist - Payload: 2,243 kg - Tires: 195/75R16C Hnedpfx Ajytf Ulschor First-hand vehicle, in very good technical and visual condition, only 10,000 km! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why our listings generally include the export price, as this is independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: excellent (used), functionality: fully functional, mileage: 669 km, power: 294 kW (399.73 HP), first registration: 06/2023, fuel type: gas, empty load weight: 9,350 kg, maximum load weight: 9,294 kg, overall weight: 18,644 kg, axle configuration: 4x2, wheelbase: 38,000 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,550 mm, loading space width: 2,400 mm, Year of construction: 2023, Equipment: differential lock, full service history, hill-start assist, lane keeping assist, retarder, seat heater, trailer coupling, Iveco S-Way 400/Meiler/CNG/Natural Gas/Leaf Spring Suspension/Trailer Coupling • Manufacturer: IVECO • Type: S-Way 400 • NEW PRICE from €210,000 • Mileage: 669 km • First registration: 06.2023 • Power: 294 kW / 399 hp • Transmission: Automatic • Body: Meiler three-sided tipper • Loading area: L: 4.55 meters x W: 2.40 meters • CNG/Natural Gas • Wheelbase: 3.80 meters • Retarder • Air conditioning • Cruise control • Hill start assist • Lane keeping assist • Starting assist • Differential lock • Hands-free system • Tachograph • Roof hatch • Heated seats • Trailer coupling – Duo-matic and standard connections • Trailer hydraulics • Automatic lights • Heated side mirrors • Xenon lights • Euro: 6 • Unladen weight: 9350 kg • Payload: 9294 kg • Permissible total weight: 18644 kg Hnsdpjzavzcsfx Acher • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, mileage: 1,78,379 km, power: 280 kW (380.69 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 11,900 kg, maximum load weight: 6,100 kg, overall weight: 40,000 kg, tire size: 315 / 80 R 22.5 / 11mm, axle configuration: 4x2, wheelbase: 4,000 mm, next inspection (TÜV): 05/2025, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, total length: 7,800 mm, total width: 25,500 mm, total height: 34,000 mm, front tire size: 315 / 80 R 22.5 / 11mm, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: used, Semiconductor relays, switchgear, switching components, semiconductor contactor Hedpjh Rkuwefx Achjnr -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Manufacture: AGA CRYO Hnodpfjvdb A Nsx Acher Volume: 600 litres; Working pressure: 17,5 bar We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Year of construction: 2009, operating hours: 49,800 h, machine/vehicle number: GZN00767, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Field of application: Construction Hnsdpszpdn Uofx Acher Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Frequency: 50 Voltage: 400 Drill equipment: Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: used, Year of construction: 2009, operating hours: 49,800 h, machine/vehicle number: CAT0000LGZN00768, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Field of application: Construction Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Frequency: 50 Voltage: 400 Drill equipment: Control Panel Hnedpfx Acszpdn Ijhsr Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902034305, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Archive photos shown. Vehicle may still be in operation. Fliegl Rail-Transport Curtainsider Semi-Trailer (Huckepack) High-strength fine-grain steel welded chassis with replaceable 2" kingpin. Rail-compatible Huckepack design for combined road/rail transport. EN 13044 railway coding with ILU code. XL rail load securing package for transport speeds up to 140 km/h, including 4 colour-marked crane grab areas, integrated grab protection in the curtain, roof markings for crane positioning, max. overall height 4,000 mm with air suspension lowered for pocket wagons. Foldable side and rear underrun protection, aluminium side guards, rear ladder, D-Lock door retainers, Heavy Blocker 2.0 rear impact protection, yellow ferry lashing rings and pallet stops on both sides. Axles & Suspension: SAF 430 mm disc brake axles for combined transport with anti-drop cable protection, air suspension, automatic lift axle with forced lowering and traction aid (activated by braking three times). Braking System: Dual-line air brake system with colour-coded air lines, spring parking brake, EBS with front socket, raise/lower valve with auto-reset function. Tyres: 385/65 R22.5 tyres (manufacturer's choice), steel wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets, rear LED work light. Floor: Approx. 30 mm plywood floor on 8 longitudinal cross-members, forklift axle load up to 7,900 kg, premium sealed floor. Front Wall: 2,580 mm steel bulkhead with EN 12642 XL strength (0.8 × payload), Crash-Blocker and internal steel impact protection. Rear: Steel rear corner posts, EN 12642 XL rear portal (0.5 × payload), Fliegl I-Lock integrated door locking system (iF Design Award), lifetime warranty on frame-mounted locking components. Curtain: Reinforced curtain with welded horizontal and vertical straps, side curtain strength 0.4 × payload. Hnjdpfxezlrqcs Achsr Roof: Fliegl Blitz sliding roof with rear end lift, automotive L-roof beams, five-point roof fastening, additional roof safety hooks, non-elastic roof with minimal deflection, integrated rear rain gutter. Approval: Germany, EC type approval (2007/46), Fliegl EN 12642 XL, DL 9.5 and VDI 2700 Sheet 12 load securing certificates.

Year of construction: 2001, condition: used, functionality: fully functional, Perfect condition including price: - Onion (any type) & Garlic Peeler - Unpeeled product hopper - Transportation conveyor (for peeled product, waste, inspection table with platform) All equipment is fully made of stainless steel. I also have a large number of spare parts available at an additional cost. A new Tecnoceam Peeler 255 (machine only, without other equipment) costs nearly €200,000! Automatic Air Peeling Machine for Garlic and Onions – PAC 255 (995) This machine is suitable for peeling a wide variety of onions (spherical, elongated, or flat), shallots, and ginned garlic cloves, intended for the fresh produce market, freezing, or preserved products (in oil/pickles, sauces, etc.). ADVANTAGES: • Uniform and gentle peeling process • High flexibility, especially for handling a wide range of onion shapes and sizes Hodpfx Acjy I Dlmehonr • Durable abrasive parts with quick changeover of peeling elements • Wide selection of peeling nets available for different product calibers • Fully automated and customizable continuous operation; control panel allows adjustment of loading time (inserted quantity) and process time (peeling cycle duration) • Easy access to internal components for cleaning and maintenance • Convertible from onion peeler to garlic peeler and vice versa • Suitable for integration in multiple lines (e.g., 2/3 model 255(995) machines in series) Approximate output: Onions: 400–900 kg/h (depending on size, see brochure) Garlic: 200–300 kg/h Overall dimensions: 3,200 x 1,700 x H 2,300 mm (including automatic feed elevator) Product size range: Min. diameter: 25 mm; Max. diameter: 100 mm; Max. stem length: 30 mm Peeling cycle duration: 1–2 minutes

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,641 h, load capacity: 2,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,351 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. Hodezf Uwxepfx Achjnr * Made in Germany – with responsibility and precision * Strict technical inspection * Over 400 vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Front forklift TFG 320s Drive type: Internal combustion engine Load capacity: 2,000 kg Year of manufacture: 2019 Operating hours: 2,641 Lifting height: 4,700 mm Mast type: Triplex Free lift: Yes Overall height: 2,150 mm Fork length: 1,200 mm Unladen weight: 3,351 kg Load center: 500 mm Tires: Solid rubber Model type: TFG 320s Cab type: Partial cab – front, roof & rear window Cab equipment: Multipilot control panel Lighting: Work lights 2x front Lighting: Work lights 2x rear Lighting: Rotating beacon Attachment: Side shifter Attachment: Additional hydraulic circuit – routed to the fork carriage