Used O.m.n. C.s.e. 500 for sale (15,931)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. Fedjywcl Rjpfx Ap Dopn CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel Fpodpfxeyv Iqvj Ap Djn and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. Fodpex U Df Hofx Ap Dopn The saw system is in perfect working order. For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck.

Condition: used, Year of construction: 1997, KP03 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1997 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Fpjdpfx Aezxq N Dop Don Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco used

Condition: used, Year of construction: 1998, machine/vehicle number: 098211, KP09 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1998 Kapasite : 500 TON Fpsdpfx Ajzxq Uysp Don Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm Fjdpfxoz A A Iwo Ap Dopn - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Serial No. 253 Fedpjyt Slwjfx Ap Dopn Spindle speed: 2800 rpm 12-position tool turret Equipped with driven tools Power: 46 kVA

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator Fodpfxswbknbo Ap Dopn This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm Fedsma Dkfopfx Ap Depn receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: good (used), Renz Punch 500 perforator The device is in very good condition. New model with regulation Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole + a cutout for the pendant. Manufacturer’s description: Perforation device with a working width of up to 500 mm The device is designed for continuous operation and high loads The work cycle is activated by a foot pedal Perforation of up to 40 sheets (4 mm) in one cycle Quick and easy replacement of perforating strips Possibility of using strips with/without a recess for the hanger Possibility of using QSA strips (quick format change by turning off selected needles without having to remove the strip) Possibility of using two-part strips – one tool allows perforation of both books without a recess for a hanger and calendars with a recess for a hanger (in this case, perforation without a recess for a hanger up to 465 mm) Device with 3-phase power supply Fpsdpfjz Rk Ipex Ap Den Weight 120kg

Condition: good (used), Renz Punch SU 500 Perforator This machine is in very good condition. The set includes a base for the machine. Electric drive, foot pedal control. Fpodsz Rk Iijpfx Ap Djn The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforating machine with a working width of up to 500 mm Designed for continuous operation and heavy loads Function cycle activated by a foot pedal Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforating strips Available with or without a cutout for the hanger Power supply: 3-phase, 380V. Weight: 170 kg.

Condition: used, Year of construction: 2022, operating hours: 540 h, Okleiniarka wąskich płaszczyzn + + stacja XES200 Producent: HOMAG Typ: EDGETEQ S-500 KAL375 AT Rok 2022 + stacja XES200 przeznaczoną do obsługi systemu klejowego PUR zastosowanie technologii airTec Sterowanie: HOMAG powerControl PC23 z ekranem powerTouch Wyposażenie: agregat wstępnego frezowania, jednostka klejowa technologia airTec agregaty obcinające agregaty frezujące, agregaty zaokrąglające cykliny polerki Fjdezkmqzopfx Ap Depn Dodatkowe wyposażenie: stacja serwisowa HOMAG XES 200. only 540 working hours!!

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) with two 2.5" heating water connections with DN 180 flange for installing RWT 500 finned tube heat exchanger with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Inclination size: 2045 mm Diameter: 700 mm Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve Fsdpfxsw Hcdlj Ap Dspn

Condition: excellent (used), I am offering for sale a professional LeCroy WaveJet 354A digital oscilloscope, designed for laboratory, service, and industrial applications. This is a high-quality measuring instrument with a bandwidth of 500 MHz and a sampling rate of 2 GS/s. Technical specifications: • Manufacturer: LeCroy • Model: WaveJet 354A • Bandwidth: 500 MHz • Sampling rate: 2 GS/s • 4 analog channels • USB port Fodpfx Apozru Sis Dopn • Built-in carrying handle • Power supply: 90–264 V AC, 47–63 Hz Condition: • Used, in good visual condition with normal signs of use. • The device powers on and functions correctly – the display is working, as can be seen in the photos.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Fpjdpoz N Akgofx Ap Don incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Ready for immediate use Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold Meter readings: Total: Approx. 4187 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Fjdpfx Apjzz Rp Aj Depn For further information, please feel free to contact us directly.

Condition: good (used), Vemag Filler & Depositor Model Robot 500 Year 2016 Complete with depositor Just removed from production Fpedpfx Aez Hl Uhep Dsn

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Technical specifications: Table dimensions: Ø 500 mm Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Max. workpiece weight: 200 kg X-axis travel: 730 mm Y-axis travel: 450 mm Fpsdoz Ndxkspfx Ap Djn Z-axis travel: 470 mm C-axis (work table rotation): 360° B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Fpjdpfx Aexv A N Rep Dsn Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Fpjdpfx Apsziwr Hs Don Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. Fedoxmrwfspfx Ap Dspn 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Fpsdpfxozx D Efj Ap Den

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) Fodpfsyrhb Sex Ap Dspn • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: repair required (used), functionality: unexamined, machine/vehicle number: 0011, Year of construction: 2013, total length: 2,000 mm, total height: 2,130 mm, total width: 1,820 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, table width: 400 mm, table length: 500 mm, space requirement length: 7,500 mm, space requirement height: 2,700 mm, space requirement width: 6,500 mm, Voxeljet VX500 industrial 3D printing system, manufactured in 2013, serial number 0011. Build volume: 500 × 400 × 300 mm. Overall machine dimensions: approximately 2000 × 1820 × 2130 mm. Weight: approximately 1200 kg. Electrical supply: 400 V, 50 Hz, three-phase, nominal current 7.8 A, fuse 16 A. The main printhead assembly is missing. The machine has not been tested and is offered as-is for repair, refurbishment or spare parts. The package includes Voxeljet VRS500, VCL1400, auxiliary extraction and filtration equipment, binder/chemical storage equipment, oven, wax bath and other accessories. Exact inventory to be confirmed. Fpodpfoz Davbex Ap Djn Located in a Turkish Free Zone. Export and customs formalities to be arranged by the buyer.

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system. Fpsdpsz Icznefx Ap Den