Used Olympus Ch for sale (12,787)

Condition: used, This listing is for a Olympus CH Microscope Prjdpfxoxzg Egs Airec In 1976, Olympus launched the CH Series, modular biological microscope series for practical laboratory teaching applications, in place of the KHS, KHC, HSB, and HSC.

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Prjdpfx Ashh Anroirsc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Podpszw Apgjfx Airerc Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, From a closed paper factory Olympus HBM Microscope 5 lenses: 5x, 10x, 20x, 50x, 100x Pedpfx Aijyfg Auororc eyepiece: 2 times WHK 10x

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 647/07, overall weight: 1,000 kg, total length: 2,500 mm, total width: 2,500 mm, total height: 4,700 mm, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Good morning, I have a CWT 95/1200 cooling tower for sale. It is a forced-draft cooling tower. Prodpfez Szfbjx Airsc The technical specifications are shown in one of the photos. Documents for the forced-draft cooling tower: - Declaration of Conformity - Technical and Operational Documentation - Information Sheet Renovation work carried out: - Motors rewound - Bearings replaced - Sealing systems replaced I am happy to provide any additional information by phone or email.

Condition: good (used), Olympus CKX53SF inverted microscope, suitable for cell culture, live cell observation, and general laboratory use. This configuration is equipped with integrated phase contrast (iPC) and comes with multiple objectives and various accessories. Pjdpfx Ajzhidfoirerc Configuration: UPLFLN4xIPC/0.13 objective CACHN10x IPC/0.25 objective LCACHN20xIPC/0.40 objective LCACHN40xIPC/0.55 objective 10X/22 eyepiece CKX3-SLP pre-centered phase contrast slider Various accessories, including coverslip platforms, sliders, and additional accessories. Features: Inverted microscope, ideal for cell culture applications. iPC phase contrast for fast and high-contrast observation. Professional Olympus platform, compact and well-suited for laboratory environments.

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Pedpfx Aijuax T Sjrsrc Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Pjdsz Ikxzopfx Airerc Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, TECHNICAL DETAILS Prjdpfjug U Rgsx Airsc - Objectives : 1.5X et 0.5X - Light : OLYMPUS HIGHLIGHT 3001

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Predpfo Afapkex Airsc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Pjdpsz Dfzcofx Airerc Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. The equipment has 3 turbines.

Condition: used, This listing is for the Olympus CX31RBSF Microscope The unit is in full working condition and is ready for immediate use Overview The Olympus CX31RBSF is an upright, binocular compound biological microscope, part of Olympus’s CX series known for its durable, ergonomic design and high-quality optics tailored for educational and routine clinical use. Key Features & Specifications Optical System & Image Quality Utilizes the UIS 2 (Universal Infinity System) optical system, delivering bright, high-contrast images with excellent field flatness. Equipped with Planned Achromat (PLCN) objectives offering superior sharpness and clarity across the field of view. Features integrated anti-fungal treatment on optics to preserve performance in high-humidity environments. Optical Components Eyepieces: Wide‑field binocular type (Field Number = 20), with a 30° inclination and interpupillary adjustment between 48‑75 mm. Objectives (typical standard set): Plan Achromats at 4×, 10×, 40×, and optionally 100× oil immersion (in some configurations). Scribd Condenser: Built‑in Abbe condenser with NA of 1.25 (with oil immersion) and aperture iris diaphragm for precise illumination control. Pedpfxoxhfd Ie Airsrc Illumination & Stage Comes with a built‑in Köhler illuminator using a 6 V, 30 W halogen bulb. Stage: Rackless design with a double-slide holder, complete with ergonomic tactile grips for smooth X‑Y movement; stage travel approx. 76 mm × 50 mm. Ergonomics & Build Quality Featuring a rigid Y-frame, low-positioned coaxial coarse/fine focusing knobs, and pre‑focus upper limit to prevent contact with slides. Integrated hand grips make transport within labs easy and safe. Some models in the CX31 line include tilting binocular tubes, though CX31RBSF is typically fixed Dimensions & Operating Conditions Approx. 233 mm (W) × 411 mm (H) × 367.5 mm (D), weighing around 7.7–8 kg. Designed for indoor use at altitudes up to 2000 m, ambient temperature range 5 °C to 40 °C, with humidity restrictions depending on temperature.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Predpfx Aieyvhl Hsroc Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 919254, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale during the jeans factory liquidation is a GLOBAL US 63900 CH-NA-AUT automatic industrial chainstitch hemming machine, offered as a complete workstation. This modern (2019) unit is specifically designed for high-quality bottom hemming in denim, trousers, and workwear production. Built on the well-known 63900 platform, it delivers the classic chainstitch finish required in professional garment manufacturing. The machine features automatic functions including thread trimming and pneumatic operation, enabling efficient and consistent production with minimal manual intervention. The unit has been used in a professional production environment and was fully operational prior to factory shutdown. The machine has been serviced on 27.02.2026 and video recorded in full operation in April 2026. Key features: • Automatic chainstitch hemming system • High-speed production capability • Classic 63900 chainstitch finish (denim standard) Podpfx Aisy Ipu Tjrerc • Automatic thread trimming • Pneumatic presser foot operation • Stable feeding and consistent stitch quality • Modern unit (2019 model) with low mechanical wear Includes: • GLOBAL US 63900 CH-NA-AUT machine head • Industrial sewing table • Motor and control unit • Foot pedal • Thread stand • Integrated hemming and trimming system • Suction system for thread and fabric waste (visible) Technical details: • Manufacturer: Global Selection (Netherlands) • Model: US 63900 CH-NA-AUT • Year: 2019 • Stitch type: Chainstitch • Max speed: approx. 5,000 stitches per minute • Needle system: DVx57 • Power: 220V • Pneumatic system required Condition: • Used, excellent production condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Denim bottom hemming • Garment finishing • Workwear production • Chainstitch hemming operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, This listing is for Olympus U-RFL-T Fluorescence Power Supply The unit is in full working condition and ready for immediate use This fluorescence power supply is a robust unit designed to provide consistent burner illumination for optical laboratory applications. Manufactured by Olympus, this reliable system is an excellent addition to any modern facility needing to power their fluorescence microscopes. Transparency Report and Technical Audit: Software and Media Disclosure: Prsdezqf Npopfx Airjc As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), functionality: fully functional, Mikron WF 32 CH with Heidenhain TNC 355 Pedpfxj Afacqs Airjrc

Condition: used, This listing is for a Olympus U-DO3 Dual Observation Attachment. The unit is in full working condition and is ready for immediate release. The Olympus U-DO3 Dual Observation Attachment is a microscopy accessory designed for Olympus BX series microscopes. It allows for simultaneous observation by two users, making it an ideal tool for collaborative research, education, and training. Key Features Dual observation capability with a movable LED arrow pointer, controllable by both viewers Selectable colour (red or green) of the arrow pointer Compatible with Olympus BX series microscopes Prodpsxxy Ivofx Airsc Allows for real-time observation and discussion between two users

Condition: new, Year of construction: 2022, APS PHE BRAND NEW ASP PHE for Milk pasteurisation CH - UX 10.5 5000 Liters per hour || Never used | Year 2022 | Contact us for more information ARSOPI PHE For Milk 5000 L/H Condition : New IN STOCK Usage: Milk Pasteuriser Capacity: 5000 L/h Pjdpfxez Ht Euo Airjrc

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Prjdpszxqz Tsfx Airjc Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SCK 60 0 0 00 10 318 98 5, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 07/2001, next inspection (TÜV): 03/2028, suspension: steel, tire condition: 85 %, maximum speed: 100 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2001, operating hours: 300 h, Equipment: trailer coupling, from the vehicle registration document "permissible drawbar load, kingpin load or axle load in compliance with the total weight: drawbar load 150 kg, 1st axle 1750 kg, 2nd axle 1750 kg, tandem axle 3500 kg" Prodpfx Aieyvul Tersc 2 movable ramps; non-slip birch plywood floor; threaded support wheel; overrun brake; manual cable winch; rear fog light; 8 lashing hooks; 4 recessed, folding lashing rings; 2 wheel chocks; Extra: 2 motorcycle mountings with screw fixation

Condition: used, mileage: 21,606 km, power: 382 kW (519.37 HP), first registration: 12/2024, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 02/2027, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Multi-function steering wheel, sun visor for the windshield, sunshade for the door windows, cool box, MAN sound system, side camera system (SCS) ## SEE DOCUMENTS ## Müller 12111800 Predpfxjz R Hlke Airjc

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Prjdpfxez Hpnfj Airjc Iemca CH 220/32 Year of manufacture: 1999 Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Star SA 16 The bar feeder can be inspected at our warehouse at any time.

Year of construction: 1995, condition: good (used), CHUN ZU CH-10LL DOUBLE STROKE HEADERS Max cut-off diam.: 10 mm. Max cut-off length of shank: 193 mm. Max shank length of blank: 153 mm. Speed: 70 ppm Pjdelnll Aspfx Airjrc Complete with lots of tooling

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Prsdpfx Aioz I Uvksroc

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Pjdez I Uwhspfx Airsrc