Used Ott 300 K75 for sale (13,766)

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Lrjdpfx Abey Aplzjyon Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating Ledpfxox D E Avo Abysrn

Condition: excellent (used), Ott hydraulic veneer press In top condition Pressing area: 3000 x 1350 mm Lsdpfx Aszfqzyebyorn Water-heated veneer press Test run possible at any time.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm Lrodpfxsx Uru Ns Abyjn weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, Wide belt sanding machine Manufacturer: Ott Model: RSO-1300 Lredpfx Aozbud Eebysn Year of manufacture: 1992 Working width: 1300 mm With roller: 15 kW And Sanding shoe: 11 kW + Brush Feed speed: 10 m and 20 m

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4533.22 € 300 x 40 x 51 mm 2,2 kW 1250 1/min 42 mm 540 mm 530 mm 1180 mm 800 x 600 x 1400 mm 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Lredpfx Abjyrhpcoyjn Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764)

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg. Lodpfx Abjyxcmqsysrn

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Ljdocwwm Tjpfx Abyorn Approximate weight: 85 kg Space requirement: 720 x 470 x 400 mm

Condition: new, Year of construction: 2026, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) Lsdper Ez Uwsfx Abysrn NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2005, condition: good (used), machine/vehicle number: 50 330 008, Offer 21055 Technical specifications: - Polishing disc diameter: approx. 300 mm - Disc width: approx. 40 mm Lsdpfx Aji Dav Djbyjrn - Disc bore: approx. 76 mm - Disc speed: 1500 rpm - Drive: 400 V / 2.2 kW - Working height: approx. 1150 mm - Machine stand - Space requirement: approx. W 500 x H 1300 x D 250 mm - Weight: approx. 50 kg

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Lrodpsvgud Sofx Abysn Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, Year of construction: 2010, functionality: fully functional, Used Almex Contivar AL300 Expander - Including 160kW drive motor - Including hydraulic unit & crusher Lodpjy Swfuofx Abyjrn - Including various spare parts

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Lrsdpfx Abeuu Upgeyjn Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. Ledsr Ihzispfx Abyern The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: refurbished (used), Year of construction: 2019, operating hours: 20,000 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap Shear MS-6300e (scrap shear with electric motor), supplied without operating fluids. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Lsdex Tp H Hepfx Abyorn Discharge height: 600 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is fed into the intake area using an excavator. Due to the horizontal loading area and the self-weight of the scrap, the material falls into the loading chamber and the cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carriage, pressing the material over the blades mounted on the front wall. While the tool carriage moves horizontally, the processed material is pushed out through the blades at the front end of the chamber. When returning to the rear position, the loaded scrap moves by gravity into the shear. The scrap shears are available in various configurations according to customer requirements, and the output size can be customized (with new orders). Inspection and test operation are possible.

Condition: used, Year of construction: 2023, with ball head K80 for 3to drawbar load Wheel arches per axle for plastic / fabric mudguards Air suspension Agroturn, 2,225mm Preparation for forced steering / ventilation Air bellows on first axle Tandem eccentric worm-drive pump type Wangen / BOMECH towing shoe Ledpfx Abjt Dnuusyern

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 6,490 mm, total width: 3,220 mm, Bottero CNC Year - 2022 Model - Pratica Plus 3300 Automatic tool changer Complete with all tooling and spares Excellent condition as it has done minimal work Lodpfsydbigjx Abyorn Delivery and Installation available.

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 Lrodsy Ilvgspfx Abyjn • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar Lrsdpfoy E Iycox Abyjn - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Lrjdpfey T Irhex Abyen Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm Lredpfx Aoy Drn Uebyon - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min Lrjdpfx Ajyqanbsbyen - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Lrjdpewpm Igjfx Abysn Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: used, Year of construction: 2003, Used machine Lrodpfx Aoxymfwobyen Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Lrsdpfx Aszcd Amobyjn Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)