Used Bridgeport Vmc 800 Xp for sale (41)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, CNC Vertical Machining Center “BRIDGEPORT VMC 800” With Heidenhain TNC 410 path control Year of manufacture: 2000 Travel ranges: X 800 Y 500 Z 500 Spindle speed range: 0 – 10,000 rpm, stepless With the following accessories: Fixed angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 tool magazine slots (SK 40) Fully enclosed safety cabin with sliding doors and internal lighting Various SK 40 tool holders Electronic handwheel Coolant system with reinforced 20 bar pump Dsdpfx Ageypb Rhjkscd Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Dsdpfx Agjwynrzokecd Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, 3-Axis Machining Center Manufacturer: Bridgeport Model: VMC-1000 XP Year of manufacture: 10-2002 Control type: Heidenhain iTNC-530 Operating hours: n/a S/N: 82XXXX Technical Data: ----- - Travel X-Y-Z: 1,050 x 610 x 600 mm - Spindle: max. 8,000 rpm - Tool holder: SK40 - Tool magazine: 22 positions - Coolant system - Through-spindle coolant (IKZ) Dsdpsw Nyfdofx Agkscd - Glass scales on all axes X-Y-Z - Central lubrication - Weight: approx. 4.2 t - Dimensions LxWxH: 3,000 x 2,350 x 2,400 mm Accessories: ----- - Manuals - Tool holder package Special features: ----- - Through-spindle coolant (IKZ) deactivated due to defective flow tube in spindle - Spindle replaced in 2023, few hours of operation, precise concentricity

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Dodpfjxf Ax Dex Agkjcd Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min Djdpfxsvxwq Es Agkocd spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Dsdpfx Ajtufb Ijgkecd

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 823679, Axis:XYZ (3-axis) Max. Travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530 Dcjdsttm T Espfx Agksd Dimensions: 2320x4140x2690mm

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE   Dedpfexvfvmox Agkecd X-AXIS TRAVEL: 800 mm Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 600 mm SPINDLE: 8000 rpm; BT 40 TABLE SIZE: 1000 x 490 mm MAX ADMITTED LOAD: 750 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS CONTROL UNIT: HEIDENHAIN TNC 410 WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3160 x 2160 x 2740 mm

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 610 mm z-travel 610 mm control Heidenhain 530 weight of the machine ca. 6700 t Dodoxbtnbepfx Agkjcd

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distances Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Work table Length: 1,150 mm Width: 490 mm MACHINE DETAILS Dodpeyn Nvvsfx Agkecd Control system: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D probe Note: The machine vices mounted on the work table and the tool holders, including the tools installed in the tool magazine and spindle, are not included in the scope of sale and delivery. The oil mist extractor, which may be visible in the photos, is also not included in the scope of sale and delivery.

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Djdpfxeyn Nwte Agkecd Spare parts (as shown in the pictures) Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 410 mm z-travel 520 mm control Siemens type 840 D Tool changer 30 Pos. spindle taper: ISO 40 spindle turning speed range 40-6000 U/min table surface area 840x420 mm Dcodpfxoyqvt Te Agksd Table load 500 kg spindle power 8,5 kW total power requirement 15 KVA weight of the machine ca. 2,7 t Machine has 4 axes The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Djdpfx Aeyhph Eegkscd Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Dedov Uqb Nepfx Agkscd

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm tool change unit: 16 Dcjdpfx Ageviwg Ueked turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on" *

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Dcodpjxrca Usfx Agksd

Condition: good (used), Year of construction: 1998, Technical data shown on picture. Parts shown by hand not come. HEIDENHAIN TNC 410, BT 40, Djdpfx Agjw Tlviokecd 18 bar coolant thru spindle, 22 tool places in tool changer.

Condition: good (used), Year of construction: 2000, Parts shown by hand on movie or pictures not come. Djdpfx Aow Tl Dtogkscd 30 tool places in tool changer. coolant thru spindle 18 bar,

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm Dedpfx Agedt Ttkskocd spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 810T, total height: 2,900 mm, number of axes: 3, This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Dimensions Dcedpfxjx D Hk Ie Agkjd Machine Depth 4400 mm

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Djdpfx Agexqp Enjkscd Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Djdpfxjxqprue Agkscd Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: ready for operation (used), Year of construction: 2000, controller manufacturer: HEIDENHAIN, controller model: TNC 426, number of axes: 3, This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. It's a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine. Dedpfxjx D Hutj Agkscd

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Machine Benefits Technical Machine Benefits Dcedpfxeyi Eg Hs Agked • Spindle nose to table top: 145-685 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg Dodpfxjtylazj Agkecd   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding