Used Bridgeport Vmc 560 22 for sale (51)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment Hedpfx Aiey D N Aiorow • Chip conveyor (included) Technical Specification Taper Size SK 40

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Hsdjv Uqb Nopfx Airow

Condition: ready for operation (used), Year of construction: 2001, Available for immediate pickup from our location: Vertical machining center, Bridgeport Hjdpo Aa Iriefx Airow Type VMC 800 Year of manufacture: 2001 Spindle renewed in 2026 (€13,000) Heidenhain TNC 410 Table size: 1000 x 500 mm X/Y/Z travel: 800 / 500 / 500 mm Table load capacity: 750 kg SK 40 22-tool changer Spindle speeds up to 10,000 rpm Drive power: 11 kW Vises, chucks Weight: 4 tons Price: €9,000 plus VAT, ex works

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces Hsdodt Ttkepfx Airjw carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: good (used), functionality: fully functional, Bridgeport VMC 600 22 CNC machining center with Heidenhain TNC 410 / 426 control system -Travel X-axis: 600mm -Travel Y-axis: 410mm -Travel Z-axis: 520mm -Table load capacity: 500 kg Hsdpfx Aiszhg Riersw -Spindle taper: SK 40 ISO/BT -Spindle power: 8.5 kW -Speed range: 40 to 6000 RPM -Tool changer: 22 positions -Number of controlled axes: 3 -Year of manufacture: 2000 -Length: 2800 mm -Width: 2050 mm -Height: 2300 mm -Weight: Approx. 2500 kg

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Heidenhain TNC370 control X-Y-Z 1020-520-500 mm Hodpfx Aoz Iugcsirow 6.000rpm SK40 22 Toolchanger Built 6-1996 Machine is under power

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. Documentation available. An on-site inspection is possible. Individual sale possible. Hsdpoy E S D Sjfx Airjw

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 5 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y: 43 m/min, Z: 30 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power: 13 kW Speed: 12000 rpm Spindle taper: BT 40 Dual-arm tool changer: 30 tools Tool change time: 5.2 sec Blum measuring probe TC52 Oil mist extraction Coolant system Automatic central lubrication Vacuum monitor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h Hedezbqx Sopfx Airow The machine was mainly used for machining aluminum and plastic, so the guide rails and spindle are in very good condition. Including 5 tool holders: 1 Weldon chuck, Ø16 1 collet chuck OZ DIN 6388, Ø 2-16 1 collet chuck OZ DIN 6388, Ø 6-25 1 milling cutter holder 1 short drill chuck, Ø 1-13 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 900 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Bridgeport VMC1000 XP3 was manufactured in 2005. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a worktable with dimensions of 1200 × 600 mm and a maximum table load of 900 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC1000 XP3 vertical machining centre we have for sale. Contact us for further details. Hedpfx Ais Agvnrerow • Worktable dimensions: 1200 × 600 mm • Rapid traverse: X 43 m/min, Y 43 m/min, Z 36 m/min • Electrical: 415 V, 50 Hz, Full load current 58 A, Short-circuit rating 25 kA Additional equipment • Chip conveyor with auger discharge chute Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 610 mm, travel distance Y-axis: 5,110 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, table load: 500 kg, overall weight: 6,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details. • Worktable size: 900 × 500 mm • Max workpiece weight: 500 kg • Rapid traverse (X): 43 m/min • Rapid traverse (Y): 43 m/min Hodpe Afxtgofx Airow • Rapid traverse (Z): 36 m/min • Electrical: 400 V, 3-phase, 50 Hz • Full load current: 50 A • Short circuit interrupt rating: 415 V / 10 kA • Manufacturer address (nameplate): Hardinge Bridgeport, Whiteacres, Cambridge Rd, Whetstone, Leic, LE8 6BD, England Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Hodpfxsz Iadys Airow Year of manufacture: 1997

Condition: excellent (used), travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain TNC 426 PB, workpiece weight (max.): 750 kg, total height: 2,750 mm, total length: 4,000 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,200 kg, spindle motor power: 13,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 3-axis CNC machine (VMC) BRIDGEPORT - VMC 800 XP MACH-ID 9835 Make: BRIDGEPORT Type: VMC 800 XP Control: Heidenhain TNC 426 PB X - Travel: 800mm Y - Travel: 510mm Hedpfx Aioz Nw Igorjw Z - Travel: 600mm Table Length: 1000mm Table Width: 490mm Table load: 750 Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: Sk40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 4000mm Width: 2250mm Height: 2750mm Weight: 4200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Hjdpfxeyhph Es Airew Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 • Number of tool slots: 30 Hjdpezkh I Usfx Airsw • Chip conveyor: Complete with Chip Conveyor

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a Heidenhain 426 control and has a spindle speed of 6000 RPM, along with 30 tool places. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details. • 4th and 5th axis interface for Jones & Shipman rotary table Technical Specification Taper Size BT 40 Hedezf I Udjpfx Airjw

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 426 control and offers 30 tool positions, along with a BT40 spindle holder. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details. • 4th and 5th axis interface for Jones & Shipman rotary table (interface only; rotary table not specified) Hjdpfx Aijzf Nh Esrjw Technical Specification Taper Size BT 40

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Hsdpfx Ajz Dkilsirsw

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. Hodszf Iqrepfx Airow • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details. Additional equipment • Chip conveyor Technical Specification Taper Size BT 40 Hodszfqacspfx Airsw

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Hsdpfstufb Iox Airew

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm Hedpszvf Suofx Airow - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Hsdjz Hxcljpfx Airsw Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Hjdpfx Ajwynrzsirow Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW Hedpfxsvxwq Es Airew tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Hedpfx Aj Aazdxjirow Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.