Used Oxysystems Os-40-Nx for sale (24,608)

Year of construction: 2025, condition: new, New OS-40-NX Nitrogen PSA Generator with the delivery for 43.9 Nm³/h at 6 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 2.5 m³/min Pressure >8 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 43.9 Nm³/h Nitrogen pressure: 6 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-40-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors. Redow Dqdbopfx Abhew

Year of construction: 2026, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Time of delivery 8 to 10 weeks Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Redpfx Abjwa I Ebehew Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2025, condition: new, New OS-60-NX Nitrogen PSA Generator with the delivery for 65.0 Nm³/h at 7 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 3.7 m³/min Pressure 9 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 65.0 Nm³/h Nitrogen pressure: 7 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-60-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping Rjdpfx Asvyq S Sjbhjw -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg Rodpfxst Hw S Uj Abhew dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, mileage: 29,985 km, power: 140 kW (190.35 HP), fuel type: gasoline, gearing type: automatic, first registration: 01/2024, next inspection (TÜV): 01/2027, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, * German vehicle, second owner, very good condition * Audi extended warranty valid until 01/2029 * Auxiliary heater * Adaptive suspension with drive select * Swivel tow hitch * Interior S line, S line business * Comfort package * Matrix LED headlights * Summer tires 20 inches + winter tires 19 inches, approx. 80% tread * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: * Special equipment: Assistance package, Audi connect (Remote / Control), Audi Drive Select + suspension with damper control (Magnetic Ride), Exterior mirrors, electrically adjustable, heated and folding, with automatic anti-glare and curb-side functions, Exterior mirrors, black, Business package, Interior: Aluminum trim, Interior: Decorative trim, piano lacquer, black, Interior mirror with automatic anti-glare function, Interior package S line, Isofix mounting for child seat on front passenger seat, Comfort climate control, 3-zone, Comfort package, Contour / ambient lighting package (plus), Headrests, adjustable, Lumbar support, front, electrically adjustable, Light alloy wheels 7x19 (5-arm dynamic design, for winter tires), Light alloy wheels 8.5x20 (5-double-spoke design, Rotor, black matt, polished), Exterior package, black plus, Rear view camera, Front seat, left, electrically adjustable, Special paint, Daytonagrau pearl effect, Sound system DSP / Audi sound system, Auxiliary heater, Rear window tinted (privacy glass) Rodpfxjzhhm Eo Abhsw Additional features: Front passenger airbag can be deactivated, Airbag, driver/front passenger, LED turn signals integrated in exterior mirrors, Roof rails, black, Door sill trims with aluminum inlay and lettering, illuminated, Driver assistance system: Brake assistant (Audi pre sense front), Driver assistance system: Occupant protection system (Audi pre sense basic), Driver assistance system: Emergency assistant with automatic emergency call, Driver assistance system: Lane change and lane keeping assistant (Side Assist and Lane Assist), Windshield, acoustic glass, Floor mats, velour, Body: 4-door, Child lock, electrically operated, Head airbag system (Sideguard), Loading edge protection (stainless steel), Engine 2.0 L - 140 kW 16V TFSI, Multi-Media-Interface MMI Basic Plus / MMI Radio Plus, Otto particulate filter (OPF), Parking brake, electro-mechanical, Radio reception, digital (DAB), Wheelbase 2680 mm, Tire repair kit, Low emission according to emission standard Euro 6d, Windshield washer nozzles, heated, Side airbags, front, Start/stop system, Complete paint finish

Condition: excellent (used), Year of construction: 2016, operating hours: 1,774 h, functionality: fully functional, working width: 510 mm, warranty duration: 12 months, tank capacity: 40 l, total height: 1,145 mm, total width: 620 mm, total length: 1,249 mm, water tank capacity: 40 l, We have for sale a Karcher B 40 W Bp Dose walk-behind scrubber dryer. Condition: Very good Year of manufacture: 2016 The machine is in excellent condition, both visually and technically. It has undergone a thorough and detailed refurbishment, ensuring it is fully operational and ready for immediate use. All of our machines are presented in genuine photos—what you see is exactly what you get. A 12-month WARRANTY is provided on all equipment purchased from us. Equipment included: - New batteries - New disc brushes - New squeegee rubbers - Charger Technical specifications: - Power supply (V): 24 (battery powered) - Working width, brushes (mm): 550 Rjdpfx Ajw Ifbnobhow - Suction width (mm): 850 - Theoretical area performance (m²/h): 3300 - Practical area performance (m²/h): 1980 - Tank capacity, clean/dirty water (l): 40 / 40 - Brush contact pressure (g/cm²): 140 – 160 - Brush rotation speed (rpm): 1200 - Rated power (W): max. 1300 - Drive motor (W): 130 - Dimensions (L x W x H) (mm): 1249 x 620 x 1145

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Machine number: 29134756 Product number: 2018w25.000298 Nominal diameter: DN 25 Maximum head: 4.9 m Voltage: 230 V Efficient, variable-speed circulation pump Rsdpfx Ajv Tm Hfjbhsw Integrated control system for optimized performance

Condition: new, Barmag A-406-0956 Beltro-Drive BDV433-OS-19, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Rjdpfx Absi D T Etohew

Year of construction: 2000, condition: used, Year of manufacture: Feb 2000 New: No Redporllzksfx Abhsw No guarantee. Please contact us if you can't find what you are looking for

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Redpfx Abji Ri Ayshew Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Rjdji Riwmspfx Abhsw Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Year of construction: 2022, condition: ready for operation (used), I am offering a Shimadzu GC MS, TQ8040 NX, Nexis GC-2030 gas chromatograph in perfect condition. Gas chromatography/triple quadrupole mass spectrometry (GC/MS) Due to the sensitivity of the device, on-site disassembly and personal pickup are required. Rodpfx Ajy Tmlysbhjw Please check out my other listings, where you will find many more devices from a closed laboratory.

Condition: new, Year of construction: 2026, CORMAK OS-4000S Welding Fume Extractor The CORMAK OS-4000S is an industrial welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000S Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Rsdpfoy Sgc Aox Abhsw Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Noise Level ≤ 78 dB(A) Dimensions 900 × 900 × 1950 mm Why Choose the OS-4000S? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Dust collection container – fast and convenient emptying without mess. Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000S is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: new, Year of construction: 2026, CORMAK OS-4000M Mobile Welding Fume Extractor The CORMAK OS-4000M is an industrial mobile welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related processes. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000M Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Noise Level ≤ 78 dB(A) Dimensions 900 × 900 × 2300 mm Why Choose the OS-4000M? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Mobile construction – easy movement between workstations (workshop/production). Dust collection container – fast and convenient emptying without mess. Redpfx Absy Sgbrehow Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000M uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000M is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: new, MIG/MAG – Pulsed MIG/MAG – TIG DC HF – Electrode Single-phase power supply 1x230V greenWave® inverter technology Integrated wire feed unit 9 innovative welding processes from Böhler Welding 3.5" color LCD control panel Redpfxeyrfd Re Abhow 220A at 35% (40 °C) 23.7 kg

Condition: new, Layout: Crusher Attachment suited for: Construction machines Selling price: € 1.950, US$ 2.053 Galen hydraulic breakers are user-friendly and tailored for all excavator sizes and models. Prioritizing breaking capability, Galen Breakers' high efficiency ensures rapid, safe, and productive operations. They are fuel-efficient due to their low flow/pressure design. Available in both small and medium variants, we offer 8 models weighing from 125-2750 kg, compatible with excavators from 1.5-30 tonnes. Rodjpl Ef Nopfx Abhjw For detailed information and price inquiry please contact us

Condition: refurbished (used), Year of construction: 2023, operating hours: 27 h, functionality: fully functional, working width: 550 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Dose R55 is from 2023 and has only 27 operating hours. It has been completely overhauled by us, with every component cleaned and function-tested. The Kärcher B40 W features a stepless traction drive, greatly simplifying operation. Its controls are intuitive, eliminating the need for lengthy training. The machine also has a cleaning agent dosing system that ensures the precise amount of chemicals is used during each cleaning process. The unit is fitted with new maintenance-free gel batteries, which can be easily recharged using the integrated charger. The suction bar has been sandblasted, newly powder-coated, and equipped with new squeegee rubbers. It also features two new roller brushes. The roller brush deck allows for the wet removal of coarse debris, such as wood splinters, by sweeping them into a dedicated coarse dirt container. The Kärcher B40 W Dose R55 is well-suited for daily cleaning of workshops, warehouses, or retail stores. Technical data: Working width: 55 cm Tank capacity: 40 liters (fresh/dirty water) Area coverage: approx. 2,000 m²/h Rsdpfx Abjyrqy Dshsw

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,035 h, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Dose D51 is a 2020 model with 1,035 operating hours. It has undergone a comprehensive overhaul by us, during which every component was cleaned and function-tested. The Kärcher B40 W features a stepless drive system, which greatly facilitates working with the machine. The intuitive operation eliminates the need for lengthy user training. It is equipped with a detergent dosing system that ensures the cleaning process always receives the precise amount of chemical required. New, maintenance-free gel batteries have been installed, which can be conveniently recharged via the integrated charger. The squeegee was sandblasted, newly powder coated, and fitted with new suction lips in our workshop. A new brush is included in the scope of delivery. The Kärcher B40 W Dose D51 is ideally suited for daily cleaning tasks, such as in workshops, warehouses, or retail stores. Technical data: - Working width: 51 cm Redpfx Aex Tf H Aobhjw - Tank capacity: 40 liters (fresh/dirty water) - Surface performance: approx. 2,000 m²/h

Condition: good (used), Various standard and powered tool holders in different designs for VDI 20, 30, 40, 50, and 60. Please specify the VDI size you require when submitting your inquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Rjdpjbql T Eefx Abhsw

Condition: used, Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool Redpfxjc U T Adj Abhow -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg

Condition: new, NEW & unused Overview / list of available types (see pictures) multiple units available Rjdpfx Abep T N Tqohew Price: per piece

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Rjdpew Rm Saofx Abhsw Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Redpfozhi Uwsx Abhew Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: excellent (used), CATALOG NUMBER 7541 Rodpozhv Absfx Abhow Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2004, DAEWOO Mynx 540 cnc vertical machining center Year: 2004 Specifications: Axis X travel 1020 mm Axis Y travel 510 mm Axis Z travel 625 mm Rotary table ( Tsudakoma RZ-200 ) Type of CNC FANUC 21i-MB Table length 1200 mm Table width 500 mm Max. part weight 800 kg Number of tool positions 24 Spindle taper BT 40 Max. spindle speed 8000 rpm Spindle motor power 15 kW Weight 7500 kg Machine has new spindle, fitted in October 2025. Rjdpfx Aext E Drobhjw Accessories/options: - 4.axis Rotary table ( Tsudakoma RZ-200 ) - Through spindle coolant - Documentations - Remote control - Coolant tank - Spindle cooler Under power in our warehouse!