Used Plasticizing Unit - Screw Assembly for sale (41,298)

Condition: reconditioned (used), screw conveyor diameter: 60 mm, Plasticizing unit – DEMAG screw assembly, screw-cylinder unit, 60mm diameter. Pgedozkw Abjpfx Aireu Complete with RSP, heating bands, etc. Condition: Production-ready, overhauled. Suitable for: EE 840 / Injection weight: 570g = 636cm³ EE 1450 / Injection weight: 690g = 763cm³ EE 2300 / Injection weight: 800g = 891cm³

Condition: used, WSM Stationary Screwing Unit, Screwing Station Assembly of parts for car radios and navigation systems, as well as testing of these parts. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with a holding (locking) function. In automatic operation, the doors are locked and can only be opened when the automatic cycle is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic cycle cannot be started with the door open. Functional sequence: The station is supplied with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a single unit passing through. In normal operation, all 3 stations work in parallel. - Positioning the unit with the pre-assembled unit in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparing with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the unit onto the belt Pgsdpfx Aijibichersu - Positioning the unit with the pre-assembled unit in station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.3 - Lowering the light protection cover and establishing contact, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD and CD slots and buttons - Function test of the CD eject button - Lowering the unit onto the belt > continue If errors occur during the test, they are displayed on the screen and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic cycle, the unit is tested again in the station. If no repair is possible (e.g. screwing error), the unit is marked as NIO (Not In Order) in the control system and is not processed further. A manual NIO marking and removal is also possible. More assembly stations, new and used – find them in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, Dear Sir or Madam, We have a plasticizing unit for an injection molding machine for sale. For sale to businesses only + no warranty. The unit must be inspected at our premises before purchase! Please contact us for more information! Technical specifications: Plasticizing capacity: 3000 Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle bore: 6 mm open Weight: approx. 1500 kg Adaptation for plasticizing capacity 3000 for injection unit SP6100. BluePower – full insulation for the plasticizing cylinder to reduce energy consumption. Standard screw. Podjzxgw Repfx Airegu Wear-resistant plasticizing (increased wear protection) for plastics with more than 25% filler and reinforcing agents. Electronic coding of the plasticizing unit for automatic recognition of technical data and maximum operating parameters: screw diameter, temperature, injection pressure, speed, plasticizing torque. Extended nozzle including additional control zone, heating band and thermocouple, to compensate for the immersion depth when using magnetic clamping plates. If you are interested, please do not hesitate to contact us.

Condition: used, Double-sided shelving system For sale is a large, double-sided shelving system with a length of 7.20 meters and a total of 60 metal shelves. The system consists of two opposing rows of shelving, each with six shelf bays and five storage levels per bay. Due to its double-sided design, the shelving system offers a high storage capacity with a compact footprint. Ideal for warehouses, spare parts storage, workshops, production facilities, as well as industrial and commercial applications. The shelving can be assembled quickly and easily using a screwless plug-in system. Technical data Type of shelving: Double-sided shelving system Overall length: 7,200 mm Overall height: 2,900 mm Depth per shelving side: 350 mm Overall depth: approx. 700 mm Bay width: 1,200 mm Number of shelf bays: 12 (2 x 6 bays) Storage levels per bay: 5 Total number of shelves: 60 Cross braces: 2 Shelf material: Metal, galvanized Frame color: Dark gray / Black Pgjdpfx Aio Af I S Asreu Condition: Used Scope of supply 14 x Shelf uprights 2,900 x 350 mm 60 x Metal shelves 1,200 x 350 mm 02 x Cross brace Your partner for safe storage logistics: Assembly, disassembly & shelf inspection An efficient warehouse is the backbone of your success. We ensure that your shelving systems are properly installed and meet all safety standards. As experts in storage technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse clearance – we take care of the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Storage platforms for optimal space utilization Shelf testing & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Check of locking pins and load signs. - Creation of a legally sound test report, including a test label. "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 1996, condition: excellent (used), Grasso Screw Unit Amonia with 55 KW motor/3000rpm with oil cooler and control panel Pgodpeip Uh Tjfx Airsu Cap.= 152,3 KW at -9C°/+35C° Flow rate= 321m3/h Compressor: ER-E36S-28

Year of construction: 2019, condition: like new (used), Condition: As good as new Pgsdpsk Sgwasfx Airsu Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, SAB163BF Screw Unit Amonia with HELMKE 90KW motor/2985/3550rpm frequency driven Pedexawpyjpfx Airsgu with oil separator OHU6022D Total refurbished in 03/2020 Running hours since refurbishment: 17724h Cap.= 289 KW at -30C°/+40C° Swept Volume= 1404/1689m3/h with Siemens Control and Danfoss frequency converter

Condition: excellent (used), Plastic silos From Colortronic dryer Volume: 400 and 200 L Price: 500 EUR per unit Price for 3 units: 1,200 EUR!!! Pjdpfowydrqox Airogu

Condition: good (used), 12 plastic silos From Motan dryer Capacity from 150 to 300 L Podpewydqmefx Airjgu With heating Price starting from 500 EUR per unit Discount available for multiple silos!

Condition: not inspected (used), Item: Complete hydraulic unit with electric motor, power: 1.5 kW (4 units) Psdpfx Aisz R N Uvsrogu

Condition: not inspected (used), Item: Complete hydraulic unit with electric motor, power: 1.5 kW, (24 units) Pgjdpfoz R N Tfox Airou

Year of construction: 2014, condition: used, Year of manufacture: Mar 2014 New: No Year of construction: 2014 Serial number: 1086683 Pjdpfxov Rn N Ae Airjgu complete tank for fridge unit taken from a schmitz cargobull good condition

Condition: not inspected (used), Item: Complete hydraulic unit with electric motor, power: 1.5 kW, (5 units) Podpfoz R N Sbsx Airjgu

Condition: not inspected (used), Item: Complete hydraulic unit with electric motor, power: 1.5 kW, (24 units) Pedpjz R Ra Tjfx Airjgu

Condition: new, Screw compressor AIRCRAFT ACS DUO 3.5-10 2x100 KK - Exhibition model - ----- Technical data ----- Pjdou R S A Depfx Airegu Tank size: 2 x 100 liters, Effective delivery rate approx.: 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (L x W x H): 1,200 x 900 x 1,250 mm, Weight: 201 kg - New exhibition model -

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Requires repair – control system is not functioning Year of manufacture: 1993 Cutting length: 5000 mm Shortest section length: 350 mm Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are clearing space Pedpeyxy S Dsfx Airjgu Affordable machine – ideal for export

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter Podpfx Aeyfm Epeirjgu • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Year of construction: 2009, condition: excellent (used), Grasso Screw Unit Amonia with 250 KW motor,VSD start/6000rpm Compressor: SAB 159 M - renewed 2022 with oil cooler watercooled and control panel Pgedpfx Aopvizzsireu Cap.= 432,7KW at -16C°/+35C° Maintanance through JCI

Year of construction: 1995, condition: excellent (used), Grasso Screw Unit Amonia with 132KW motor/3000rpm with oil cooler Pjdjhryh Aspfx Airegu Cap.= 641 KW at +0C°/+35C° Flow rate= 611m3/h

Condition: not inspected (used), Item: Hydraulic complete unit with electric motor, power: 1.5 kW, (16 units) Pjdpfxjz R Rbwo Airegu

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 Pgodpfxoh Nv Itj Aireu - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Pgodpfx Asuzn Nnsireu Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle Pjdpfx Asfnqapoirsgu for ENGEL injection unit size ES3550

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors Pgjdpfx Aowxv Hkeirou – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2017, functionality: fully functional, Function tested; item originates from decommissioning of equipment from an automotive supplier Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % non-condensing Pedpfx Aieyq R T Usregu You can also find the corresponding screw controller in our shop!