Used Pme03F-00:011211 for sale (34,144)

Condition: used, Used electronics and control module from SMA Regelsysteme for industrial control and automation systems. Manufacturer: SMA Regelsysteme Model: PME03F-00:011211 Device type: Processor module / control module Application area: Industrial automation and control engineering Mounting type: Control cabinet mounting Fedpfxjzfi Tbj Aatspl Condition: Used Quantity: 8 pieces.

Condition: used, Used control and electronics module from SMA Regelsysteme for industrial automation applications. Manufacturer: SMA Regelsysteme Model: PME03F-00:0112110 Device type: Control module Application area: Control engineering and industrial automation Mounting type: Control cabinet mounting Fpedpfxezfi Sws Aatol Condition: Used Quantity: 3 pcs.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Fsdpfszw Ucxjx Aatjpl Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Fedpfx Ajzw Ug Rsatepl Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Cobtjzmn N Reiaf Smorg Compressed air supply 7 bar Fpsdpfx Aajzy Staetel Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg We can ship the machine to your address.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: Fpodpfjzx Anfox Aatjl BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Density at the intake manifold: 1.2 kg/m³ Volumetric flow rate: 8.3 m³/min Fsdezn Rfkepfx Aatspl Engine speed: 2,882 rpm

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Fpodpfx Aaezrhvujtol

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 2,88,01,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Technical data: - Manufacturer: Epson - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Fsdpeznmilefx Aatspl Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Fodpfxozzbbcj Aatepl Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT CE marking

Year of construction: 2018, condition: used, functionality: fully functional, Profiling milling machine for aluminum and PVC. Fpedpfxezy I Exo Aatjl The machine comes with both left and right conveyors.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Fpjdpfx Aaezupzqstsl Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 200/80, total width: 1,540 mm, total length: 1,330 mm, total height: 2,110 mm, table length: 800 mm, For sale: a grooving milling machine. Manufacturer: WMW HECKERT Machine dimensions: 1330 x 1540 x 2110 mm Fpodpfx Aaezz Rzfotsl Machine weight: 2.5 tons

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Fsdpfx Aszy U Rujatspl Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 universal tool head, item no. 6531006 Fpedpezyktljfx Aatjl UM-ZP G3 universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm Fodpfx Ajzxc Swoatjpl - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Fpsdpfx Aaezww R Sstsl

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Fjdpfxjxzuiaj Aatopl

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours. Fpodpozzwrkjfx Aatsl

Year of construction: 2022, condition: used, Serial number: l2100128 Fpedpfx Aaozz Iuvjtel Functions: Mixing, grinding, emulsification, vacuum deaeration, direct and indirect heating, cooling. Rotating knives + counter-rotating scraper arm, with specific tank geometry for optimal product processing Technical specifications: Production capacity: 80 to 1,020 liters/hour Capacity: 246 L Temperature: -10/127°C Adjustable rotation speed from 300 rpm to 3,000 rpm Discharge via valve or by electrically tilting the tank 90° With diaphragm circulation pump Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 6,000 h, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Bodor, laser hours: 2,000 h, laser power: 12,000 W, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, power: 12 kW (16.32 HP), input voltage: 380 V, input current: 130 A, type of input current: three-phase, type of cooling: water, total length: 7,000 mm, total width: 2,500 mm, total height: 2,500 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale is a Bodor P3 12kW fiber laser cutting machine in excellent condition. The machine is being sold due to a recent upgrade. The system features a laser power of 12,000 watts and a table size of 3000 × 1500 mm. Year of manufacture is 09/2022. This machine is ideally suited for precise and rapid sheet metal processing in industrial applications. The Bodor P-Series stands out for its high dynamics and speed, with traverse speeds of up to 200 m/min and acceleration up to 1.8G, enabling efficient production workflows. It also offers high positioning accuracy of around ±0.05 mm. Typical cutting capacities (depending on material and parameters) are: Mild steel up to approx. 25–35 mm Stainless steel up to approx. 15–25 mm Aluminum up to approx. 12–15 mm Key technical data (extract): • Laser power: 12 kW fiber laser • Working area / table size: 3000 × 1500 mm • Max. traverse speed: up to 200 m/min • Positioning accuracy: ±0.05 mm • Max. table load: approx. 1,200–1,450 kg • CNC control with touchscreen and nesting software The machine can be inspected and demonstrated by appointment. Fsdpjyr Ddcefx Aatopl For questions or if you are interested, please feel free to contact us.

Year of construction: 2021, operating hours: 900 h, condition: like new (used), functionality: fully functional, spindle diameter: 200 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, Mazak Integrex J200s Fjdpfxjzz Rt Ue Aatepl Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 MACHINE DETAILS Control system: FANUC 0i-TC Fpsdpfx Aozwghmoatsl Number of axes: 2 Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm EQUIPMENT Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Condition: used, functionality: fully functional, Year of construction: 2008, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a laser welding system manufactured by TRUMPF, model: TLC 1000P. Fpedpfezy Ullsx Aatel

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 6,600 kg, year of last overhaul: 2025, Overhaul work 2025 - Lifting devices overhauled - Bottle carousel overhauled - Glue roller overhauled - Roller motor replaced - New protective covers installed - Printing heads overhauled - All sensors of the glue heating system replaced - Hoses of the extraction unit replaced - Entire electrical system inspected TECHNICAL DETAILS Output: 45,000 bottles/hour Bottle format: 500 ml, 1 l, 1.5 l Labeling system Labeling method: Roll-fed / roll labeling Label placement: Wrap-around labeling Rotation direction: Clockwise Carousel movement: Mechanical cam drive with brake/clutch Optical centering system: Mechanical Head adjustment: Manual Number of bottle carousels: 25 Number of labeling stations: 2 MACHINE DETAILS Mains voltage: 400 V Fedpfozv Rp Ssx Aatjpl Mains frequency: 50 Hz Power consumption: 35 kW Current consumption: 57 A Machine weight: 6,600 kg EQUIPMENT - Mechanical cam drive with brake/clutch for bottle carousel movement - Mechanical optical centering system - Manual head adjustment - Roll-fed labeling system for wrap-around labels - Two labeling stations - Safety guards