Used Pmh Gmbh Extruder 20 Mm 25 L/D for sale (1,29,354)

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Iiedpfx Aeiv H Ekjk Aof Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Iodpfxjznkx De Ak Asif Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Iodpfshx Elfjx Ak Aeif Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 25/22 mm, Ø 20/17 mm -Price: per piece -Number: 3 pieces -Dimension: Ø 105 x 76 mm Iiedpfx Aeflw Ayok Aof -Weight: 1.9 kg/piece

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. Isdpfx Aeby Rfpek Asif We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ijdpfx Asq R Tkwsk Asif Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: new, Wide-span shelving unit, new Iisdocfby Repfx Ak Aof Dimensions: L 2050 x H 2500 x D 800 mm Includes 4 shelf panels Shelf load capacity: approx. 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 800x2500mm Unassembled, includes horizontal and diagonal braces, Plastic foot plates 8x Crossbars 1950 mm, Includes locking pins 4x Shelf panels approx. 1940x745mm, Thickness: 22-25 mm

Condition: new, - Basic shelving unit - Wide-span shelving, new Dimensions: L 2050 x H 2500 x D 600 mm including 4 shelf panels Shelf load capacity: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Iedpfx Akjcfbzfj Asif Basic shelving unit consisting of: 2x shelving uprights, 600x2500 mm unassembled, including cross and diagonal braces, plastic footplates 8x crossbars 1950 mm, including locking pins 4x shelf panels approx. 1940x545 mm, thickness: 22 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Iedpsi Rixkefx Ak Aeif Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring Ijdsg Ewwropfx Ak Ajif -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders -Manufacturer: WMW, clamping cylinder stroke 20 mm -Type: 25 TGL 30-7311 -Shaft Ø 14 mm Iiedpjwzillofx Ak Aef -Number: 16x clamping cylinders available -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear Iiodpfxsy D I Hye Ak Ajf -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Iodoxld Awspfx Ak Aoif

Condition: new, Year of construction: 2024, power: 20 kW (27.19 HP), We convert your machine from CO2 laser to fiber laser Iiodpjnkaqlefx Ak Aof

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Iijdouiwu Hopfx Ak Aef Robust, safe, and ready for versatile applications! This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! We also offer rent-to-own and leasing options for this sandblasting container. For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.

Condition: ready for operation (used), Heidenhain LS 487 linear scale ML 120 mm Id. 572 250-02 SN:76626101N + AE LS 487 scanning head Id. 1199654-02 SN:76314222F, used, in good condition, 100% functional, scope of delivery as per photos. Iodpox Er E Nefx Ak Ajif

Condition: used, We are offering used shelving units for sale. TECHNICAL DATA Manufacturer: FX Rauscher Model: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 Boltless assembly Usage: single-sided Material: galvanized steel PRICE €1,216.25 net (5 starter bays + 20 add-on bays) €1,447.34 gross incl. VAT Tiered pricing Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Add-on bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an additional charge, depending on the destination and the size of the shipment. Please contact us for a customized quote. Iisdpfey Hqt Iex Ak Ajf PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in case of an order. The price is the unit/net price unless otherwise stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage systems, as well as machinery for commerce, industry, and trades. We continuously offer attractive second-hand equipment from various manufacturers and brands at competitive conditions. If you have any questions, please feel free to contact us. ‘Four wins’—the four success factors from DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage Isdpfjy I Skwsx Ak Aoif - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: ready for operation (used), Transroll spindle L = 1255 mm, Ø thread: 32 mm, pitch: 10 mm, Ø pin: 20 mm with bearing Ø 42 mm, Ø shaft: 32 / 25 mm, length shaft: 420 mm, Ø ball cage: 74 mm, Ø flange: 96 x 94 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Iiedpfx Akszu Hirj Aof

Condition: excellent (used), Correa A-20-25 Bed Type Travelling Universal Milling Machine Spindle Speeds 20 - 2000rpm Spindle Taper ISO50 Spindle Motor 15kW Table Size 2500 x 700mm Longitudinal X Axis Travel - 2200mm Vertical Y Axis Travel - 1000mm Cross Ram Z Axis Travel - 1000mm Range of Feeds Inf. Variable 5 - 1500mm/min Rapid Feeds 3000mm/min Overall dims - 3600 (5800) x 2220 (3320) x 2750 (WDH) Weight 9500kgs. *For sale with Jet Machinery Ltd* Stock No: 79042 Iodpfx Ajzuxrrek Asif Serial No: 9210511 Price: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece Iiodpjd Erv Tsfx Ak Ajf -Dimensions: Ø 50/H445 mm -Weight: 6 kg

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Travel: 450 mm -Piston diameter: 25 mm Iiodpfedz U Thjx Ak Aef -Dimensions: 40/40/H650 mm -Weight: 1.6 kg

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-125-25-APA-20K2 -Stroke travel: 25 mm -Piston: Ø 125 mm -Piston rod: Ø 25 mm / M20 -Max. pressure: 10 bar -Number: 7 cylinders available -Price: per piece -Dimensions: 175/135/H210 mm -Weight: 3.5 kg/pc. Iodpfxjxwk Tas Ak Ajif

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 81 mm / 25 teeth / Module 3 -Tooth width: mm -Shaft: Ø 60 mm / inner Ø 38 mm -Dimensions: see photos Ijdpfx Aksxf A Nis Ajif -Number: 7x gear shaft available -Price: per piece -Dimensions total: Ø 81 x 175 mm -Weight: 3.1 kg/piece

Year of construction: 2009, condition: good (used), Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE Ijdpfex R Svlex Ak Aeif -Voltage: 415V -Protection class: IP65 -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg