Used Precious Chocolates Coating Drum for sale (5,536)

Year of construction: 2018, condition: good (used), Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil, Dcedpfx Aioz I Dt Se Son

Condition: excellent (used), Precious chocolates coating drum Dcsdpol E El Ijfx Ai Son Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Condition: good (used), 1 x Coating Drum 4m long. Infeed diameter 750mm. Dsdpezz It Sefx Ai Secn Outfeed 1m

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel adjustable speed mobile outfeed conveyor belt width 400 mm Dcedpfx Aez Aphtsi Sen outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Condition: used, “FED” Drum Coater Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm Dodpfx Aioz Har Ie Sjcn infeed belt belt width 300 mm Elevating spiral screw

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) Djdezz H Tdspfx Ai Socn discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: new, functionality: fully functional, The BBACooler model CCC-95/60 is a compact drum cooler for cooling and solidifying of viscous products. Cooling capacity • Throughput 450 kg/h • Product inlet temperature 140°C • Product end temperature Dodew Sm Epspfx Ai Sjcn

Condition: ready for operation (used), Year of construction: 2020, Wichelmann Drum Coater Potato Flour Coater Potato flour is conveyed into the drum via a spiral screw. The discharge conveyor has a shaking and trill function. The speed control knob is defective. Djdpfxjwb Ukao Ai Secn The shaft has a dent and is bent. The shaft where two wheels are mounted to rotate the tumbler is bent.

Condition: new, functionality: fully functional, Cooling capacity • Throughput 800 kg/h Dcjdpfx Aiow Snbfe Sen • Product inlet temperature 140°C • Product end temperature

Condition: used, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, Fully automatic filling machine from the Boloni brand. ATEX-certified. Suitable for filling 25L containers. Filling by weight using load cells. The machine fills 4 containers simultaneously. Automatic capping and palletizing robot. Dcedpezx Uriefx Ai Sjn Connection between the various components via conveyor belts (steel). The machine has only been used for a limited number of hours. The machine is available for immediate delivery.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Dsdpfx Ajzqur Hoi Socn Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Year of construction: 2021, condition: good (used), 1 x Selmi R600T chocolate enrobing machine, manufactured in 2021, designed for the continuous coating of confectionery, bakery and chocolate products. * Belt width: 600 mm Dsdpfx Aozz Ncusi Socn * Serial number: R600T0000045 * Stainless-steel construction * Made in Italy * Suitable for chocolate enrobing and bottom coating * Ideal for confectionery and bakery production

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: 093185, We offer a drum-type shot blasting machine with a steel belt. Steel belt width – 1800 mm Machine year of manufacture – 1982 Filtration unit capacity – 15,000 m³/hour Dcjdsz Nqdujpfx Ai Ssn Filter motor – 30 kW Filter year of manufacture – 2017.

Year of construction: 2024, condition: good (used), Joyson Flavouring drum 2024, stainless, up to 300Kgs per hour, previously used for sugar coating, Dodeyw Tcaepfx Ai Secn

Condition: excellent (used), Forklift attachment – drum clamp Suitable for 2 x 200-liter steel ribbed/steel lid drums Description Secure grip, even on uneven surfaces Stable, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Quick and easy assembly on the forklift Automatic locking when lifting the drum Automatic release of the clamp when lowering Safe handling of steel ribbed and ring drums Height adjustable Technical data Surface: Hot-dip galvanized Application area: Lifting/transporting steel drums Djdpfx Aoxbq Irsi Sjcn Outer width [mm] 1050 Outer depth [mm] 1080 Outer height [mm] 975 Fork pocket distance [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / certificate description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 More items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Drum Cooler CCn -120/70 for powder coatings Main unit, including • Cooling calender with stainless steel cover, steel belt and crusher unit • Additional edge sealing parts • Stainless steel mainframe, rails Akzo standard Dcedpfx Ajw Snfdji Sen • Additional safety switch monitoring working position • Water collecting tank stainless steel • Airknife and rubber scraper • LEV taper in crusher housing top • LEV product outlet funnel • Sliding cover after calender • Lototo Switches with trapped key for crusher and calender hood • Software and Hardware integration of safety switch of safety inlet device incl. safety PLC extension. Safety switch from BBA Innova, all other hardware from customer side.

Year of construction: 2026, condition: new, Galvanized. 1. Rotary screen, 1600 mm, length 4880 mm, 4 mm woven wire (optional - 5.0 mm sheet metal at an extra charge), perforation 20 x 20 mm (or other upon request), drive 4 kW, drum speed approx. 14 rpm, 2. Receiving conveyor (under the drum). Length 3700 mm, width 800 mm, 3. Undersize material elevating conveyor. 4000 mm long, 650 mm wide, up to 2500 mm high, drive 3 kW, Dedpfxsd Rzy Nj Ai Sscn 4. Oversize material elevating conveyor. Length 4000 mm, width 650 mm, height 2500 mm, drive 3 kW, 5. Hopper with a length of 3000 mm, a width of 1800 mm with adjustable belt speed via a variator. Drive 3 kW, 6. Semi-mobile. Mounted on a chassis with wheels and a lower trailer hitch, 7. Cleaning brush with a diameter of 300 mm, length 4000 mm, 8. Drum drive via a gearmotor + 2 rubber drive wheels with a diameter of 230 mm, 9. Hour meter, 10. CE certificate, 12 months warranty, manufactured in EU (Poland), 11. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 12. Weight: approx. 3.5 tons, 13. Tramec durable gearmotor (with speed control in the hopper), 14. FAG and SKF rolling bearings, 15. Structures made of closed steel profiles - steel grade S355, 16. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 17. Drum construction is protected against corrosion - hot-dip galvanized (!), 18. Drum structure - S355 steel. Wall thickness 3 mm, perforation to be agreed upon (optional), 19. Brush with adjustable spring. The brush pressure can be adjusted, 20. Electrical sockets and emergency stop switches, on both sides of the machine, 21. Drum covers. Powder-coated in the painting booth. The final technical specifications (length, width, perforation, additional components, etc.) are always agreed upon individually with the customer according to their needs. Sand. Black soil. Coal. Mixed waste. We prepare the machine according to your requirements. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length - on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English and Russian.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Dcedpfexa H Ewex Ai Sen If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: Dodowzl Hxspfx Ai Secn These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. Dsdpfx Aswfhu Hji Sjcn ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: used, axle configuration: 3 axles, first registration: 10/2026, color: other, Year of construction: 1985, Carrying capacity: 22.850 kg Dsdpfxoz Ip Als Ai Secn HEAVY DUTY AANHANGWAGEN VERY NICE .BRAKE AXLES FRONT AXLE NOT GOOD.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: Dodjwzmcbepfx Ai Secn PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Djdpfx Aezruc Usi Socn Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor Dodpfez I Dtfsx Ai Sjcn

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 14,000 mm, total width: 2,500 mm, total height: 2,500 mm, overall weight: 5,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, MAGNUM LABORA ROTARY DRYER + 750 kW FURNACE – CAPACITY up to 1 t/h For sale: a complete Magnum rotary dryer from Labora, along with a 750 kW furnace, designed for drying sawdust and biomass. Dryer capacity: up to 1 t/h of dry material, depending on the moisture content of the input material and the required final moisture content. The dryer is complete, installed, and operational. It is possible to view the equipment in operation on November 15th. After this date, it will be dismantled due to the installation of a larger dryer. The installation includes, among other things: - Magnum Labora rotary dryer, - 750 kW furnace, - raw material feeding and shredding system, - fan and exhaust and chimney system, Dcsdpfx Asz Iq Rkei Sjn - dust collection and steam extraction system, hot air discharge system, spraying system, - automation system with control cabinet, - temperature measurement and process monitoring, CO detection The installation is used for drying wood sawdust for pellet production. Sale includes the complete set, including the furnace and the raw material shredding mill. I can send a video of the equipment in operation via WhatsApp. Price: 350,000 PLN net Location: West Pomeranian Voivodeship