Used Presona Ab Baler With 8-Fold Cross Tying System for sale (66,803)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Hedpovwlqqjfx Akrjl Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 3,88,200 km, power: 302 kW (410.61 HP), first registration: 03/2012, fuel type: diesel, tire size: 425/65 R 22.5, axle configuration: 8x4, wheelbase: 6,710 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 9,240 mm, total width: 2,510 mm, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, trailer coupling, = Additional Options and Accessories = - 8x4 axle configuration Hsdpfx Ajy Iamgokrsl - Digital tachograph - Lifting axle - Air suspension - Hub reduction - PTO (power take-off) - Radio/CD player - Sun visor - Towing hitch = Further Information = Technical Details Number of cylinders: 6 Engine displacement: 12,882 cc Axle Configuration Front axle: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 45%; Right tyre tread: 45%; Suspension: air suspension Rear axle 1: Tyre size: 315/80 R 22.5; Twin tyres; Inner left tread: 60%; Outer left tread: 60%; Inner right tread: 60%; Outer right tread: 60% Rear axle 2: Tyre size: 315/80 R 22.5; Twin tyres; Inner left tread: 25%; Outer left tread: 25%; Inner right tread: 25%; Outer right tread: 25% Rear axle 3: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 50%; Right tyre tread: 50%; Suspension: air suspension Weights Unladen weight: 10,930 kg Payload: 28,070 kg Gross vehicle weight: 39,000 kg Functional Crane: Palfinger / Epsilon Q170295TR, year of manufacture 2012, mounted behind cab Condition Damages: none

Condition: excellent (used), mileage: 5,62,500 km, first registration: 12/2000, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 620 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, Year of construction: 2000, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Equipment = - 2 sleeping bunks - 600-liter diesel tank - Aluminum fuel tank - Heated exterior mirrors - Driver comfort seat - Differential lock - High beam headlights - Speed limiter - Hydraulic system - Intarder - Air horns on cab roof - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - ZF16 manual transmission - Tow hitch = Remarks = HEAVY DUTY, GOOD CONDITION DAF FAS95-480XF SPACECAB (EURO 3) 6x2 STEEL/AIR SUSPENSION CHASSIS WITH ZF16 MANUAL GEARBOX, ZF-INTARDER & AIR CONDITIONING!! 480HP, EURO 3, 6-CYLINDER ENGINE!! ZF16 MANUAL TRANSMISSION!! ZF-INTARDER!! STEEL SUSPENSION FRONT AXLE!! LIFT AXLE!! P.T.O.!! AIR CONDITIONING!! ETC.!! HUFFERMANN HL26/63 20,000 KG HOOKLIFT SYSTEM (6.00 METERS LONG)!! TRUCK IS IN GOOD WORKING & DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE DAF 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Transmission: ZF16 MANUAL GEARBOX + ZF-INTARDER, 16 gears, manual Axle Configuration Brakes: Drum brakes Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Steering axle; Left tire tread: 30%; Right tire tread: 30%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Inner left tire tread: 50%; Outer left: 50%; Inner right: 50%; Outer right: 50%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Lift axle; Max. axle load: 7,100 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: Air suspension Weights Unladen weight: 11,950 kg Payload: 14,040 kg Gross vehicle weight: 26,000 kg Functional Body maker: HUFFERMANN HL26-62 20,000 KG HOOKLIFT SYSTEM Condition Technical condition: Very good Visual condition: Very good Hjdpfx Akjuy I Aforol Further Information Contact Sales Department or Erik Engel for more information.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. Hodpfjx Dnb Uex Akrsl

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Hjdpfx Aksvgrh Uorjl Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Hodev T I Evspfx Akrjl Your service team at Mertens & Frowein GmbH

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Hjdpjwx H Hzjfx Akrel Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Low maintenance – no chemical batteries

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Hedpfx Asvn Tg Iokrel Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Hjdpfx Akeu Thhrorsl Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Hsdpfx Aksyzt Nzorel Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit.

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. Hjdpfoq T N T Tex Akrsl System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hedsymmmpjpfx Akrel Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 200468, overall weight: 40 kg, total length: 560 mm, total width: 480 mm, total height: 450 mm, The device is used for the isolation and purification of nucleic acid from clinical samples and not only. The system is equipped with heating and UV disinfection functions. It can simultaneously perform isolation for 24 samples. It is characterized by a short extraction time and high extraction efficiency. The extraction process is fully automated, it uses the magnetic bead method. The device consists of mechanical parts (including a vibration module, a magnetic rod module, a magnetic sleeve module and an entrance and exit door module) and electrical parts (including a control module and a heating module). Hjdpfx Aownny Iskrsl

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 28 kW (38.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 540 mm, total length: 1,470 mm, total height: 1,610 mm, warranty duration: 6 months, heating capacity: 26 kW (35.35 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 30 28/26 kW Cooling capacity: 28 kW / 7.96 tons (12/7 — 35°C) Heating capacity: 26 kW / 7.39 tons (40/45 —7°C) Year of manufacture: 2016 Options: Hydralic module. Heat pump Hedpey Enrrsfx Akrol Hydraulic module: 1 pcs. water pump (EBARA) Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1,47 x 0,54 x 1,61 m Weight: 281 kg Working hours: 3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, power: 164 kW (222.98 HP), fuel type: diesel, color: white, Year of construction: 2013, operating hours: 13,000 h, General information Applicable material: Waste Serial number: 830.7.2074 Drivetrain Make of engine: QSB6.7 Functional Maximum reach: 1.700 cm CE mark: yes Other information Max cabin floor height: 270 cm Dipper / stick length: 750 cm Emission level: Stage IIIA / Tier III Delivery terms: EXW Production country: DE Additional information Please contact Jeroen Heindryckx, Matthias Eyckmans or Bart Apers for more information = Additional options and accessories = - Auto lubrication system - Battery disconnector - Elevating cabin - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit = Remarks = Material handler was installed on a barge. Machine collided with raised cabin against bridge. Cabin total loss. Hedoyyg Nxepfx Akrel

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,899 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 6 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Hedpfjxxkfljx Akrsl Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Hodpey Hiuwofx Akrsl Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch

Condition: good (used), mileage: 4,76,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Further options and accessories = - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Remarks = Volvo FM370 6x2*4 – HIAB X-Hiduo 188 E-5 Crane with remote control – Euro 6 MY: 23-10-2014 KM: 476184 YV2X922C1EA768827 HIAB Crane with remote control Rear steering axle Euro 6 I-Shift Sideboards = Further Information = Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 40%; Right tyre tread: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tyre size: 385/55R22.5; Max. axle load: 7,500 kg; Steered; Left tread: 50%; Right tread: 50% Hodpey Hq A Ajfx Akrjl Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Functional Details Body manufacturer: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Visual condition: good

Condition: excellent (used), mileage: 2,18,666 km, power: 206 kW (280.08 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2010, Equipment: cruise control, = Additional Options and Accessories = - Aluminium fuel tank - Leather interior - Leather upholstery Hedpsy Drr Hjfx Akrol - Air suspension - Air-suspended seats - Power Take-Off (PTO) = Further Information = General Information Year of manufacture: 2010 Axle Configuration Front axle: Steered; Tyre tread left: 60%; Tyre tread right: 60%; Brakes: Disc brakes; Suspension: Leaf suspension Rear axle 1: Twin tyres; Tyre tread inside left: 40%; Tyre tread outside left: 60%; Tyre tread inside right: 40%; Tyre tread outside right: 60%; Brakes: Disc brakes; Suspension: Air suspension Rear axle 2: Lift axle; Steered; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 15,460 kg Payload: 12,640 kg Gross vehicle weight (GVW): 28,000 kg Interior Upholstery: Leather Condition Technical condition: Very good Optical condition: Very good

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hodpfx Ajx Uyzqjkrsl 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2017, overall weight: 315 kg, total length: 1,840 mm, total width: 1,180 mm, total height: 1,000 mm, VRF SYSTEM PANASONIC U14ME2E8 40 KW Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Hedoqz Ucispfx Akrol Type of refrigerant: R410a Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), mileage: 4,76,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Additional Options and Accessories = - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Notes = Volvo FM370 6x2*4 - HIAB X-Hiduo 188 E-5 Crane with remote control - Euro 6 Year: 23-10-2014 Mileage: 476,184 km VIN: YV2X922C1EA768827 HIAB crane with remote control Rear steering axle Euro 6 I-Shift Sideboards Nor-Slep - 3 axle - Sideboards - Year: 21-12-2011 VIN: YY9SL28PX1P011791 Box dimensions: 775 x 247 x 88 cm 3 axles 28,000 kg GVW = Further Information = Transmission Transmission: I-Shift, 12 gears, automatic Axle Configuration Front axle: Tire size: 385/55R22.5; Max axle load: 9,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max axle load: 11,500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: Tire size: 385/55R22.5; Max axle load: 7,500 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Hsdpfx Aoyx U Adskrsl Functionality Body make: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Visual condition: good

Condition: used, lifting height: 37,400 mm, Year of construction: 2026, Drivetrain Drive: Wheel Weights Empty weight: 29.950 kg Functional Lifting capacity: 30.000 kg Identification Serial number: HE0138800015 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Hedpfx Akjyikcwerel Transport dimensions (LxWxH): 0x0x0 Additional information Please contact PFEIFER GROUP for more information

Condition: used, We are offering used lockers for sale. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: Light grey Condition: Used PRICE €70.00 net €83.30 gross incl. VAT TIERED PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net Hsdpfx Akey Eqc Derel 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACTS AT DLK: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. Collection is possible for this item. Delivery or shipping can be arranged at additional cost. The extra charges depend on the delivery location and volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team is happy to provide you with a non-binding, customised quote tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Hjdpfxsr Nrbte Akrel