Used Randek Ab Working Table For Wooden Framework. for sale (66,140)

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Dsdpfx Ajx Tdtnedrsck Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width Dodo Nn Hyepfx Adrsck

Condition: new, PRICE: 1500 EUR Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg Dedpfeuu H Eyex Adreck

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek notching saw JS400C is designed to create notches at the end of wooden pieces, for example, to insert a bracing beam into upright posts. The machine pneumatically clamps the wood and makes two cuts with the two 400 mm diameter saw blades. The maximum length is 380 mm, and the cutting depth can be adjusted up to 115 mm. The saw can be operated quickly and easily using a foot pedal. Functional description The wood to be notched, e.g., a post, is pushed into the covered saw slot until it reaches the set stop. The overhanging end is placed on a roller stand (not included). The foot pedal activates the pneumatic clamping of the inserted wood and initiates the sawing process. Technical description • Notching depth: 30 - 115 mm • Notching lengths: 10 - 380 mm • Wood thickness: 30 - 70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5 - 0.8 MPa (5 - 8 bar) • Saw blades: HM 400/30-3.5/2.5/40 Safety The saw is well-protected against accidental contact by means of a cover plate. When the cover is opened, the electrical power is automatically cut off, which minimizes the risk of injury. Advantages • Makes notching/cutting efficient and precise • Flexible and easy to set up • Easy to operate Dodpfx Adsd Arwhereck • The adjustable working height and the option to operate the machine with a foot pedal ensure ergonomically correct working conditions for the operator.

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Dcedpexv Arxsfx Adrjk Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. Dcsdjduub Uspfx Adrsk The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. Dsdpfx Asykqxdsdreck • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Dcedpfx Aefg Tatjdrok Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: good (used), mileage: 3,12,086 km, power: 345 kW (469.07 HP), first registration: 05/2024, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2024, Equipment: USB port, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, spoiler, = Additional Options and Accessories = - 2 beds - Adaptive Cruise Control - ADR - Airflow system - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - Remote central locking - Speed limiter - LDWS (Lane Departure Warning System) - LED lighting - Alloy wheels - Radio - Rearview camera - Sleeper cab - Side fender - Sun visor - Auxiliary air conditioning - VEB = Notes = ADR compliant Turbo Compound / I-Save Adaptive speed control Rear view camera Refrigerator Cruise control Dcodpfx Ajzkfwaedrok Auxiliary air conditioning Auxiliary heater Air conditioning New tachograph LED lighting LDWS FCW VEB VDS = Additional Information = General Information Cab: XL Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 8,175 kg GVW: 8,175 kg Axle Configuration Axle brand: Other Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Max. axle load: 7500 kg; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: Parabolic spring suspension Rear axle: Tire size: 315/70 R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Suspension: Air suspension Interior Interior: gray Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Dcedpoh Uyg Nofx Adrek

Condition: ready for operation (used), * Model: rolls for rollertables Dedpeywmqdjfx Adrjck * On stock: 2 types-sizes. * 1x Type: SW 8 * Rolls with size: 250mm x 40 mm * Price: €2,50 a piece. * Stock: 5000 pieces. * 1x Type: SW 8 * Rolls with size: 315mm x 63,5 mm * Price: €3,50 a piece. * Stock: 5000 pieces.

Condition: ready for operation (used), * Model: rolls for rollertables * Rolls with size: 500mm x 89mm Dcjdeywmfhjpfx Adrjk * Type: SW 14 * Price : €11 a piece * Stock: 2200 pieces.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Dedpowugczefx Adrjck Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, base Dcodjzru Tmspfx Adrok -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Condition: used, functionality: fully functional, Year of construction: 2026, A mobile work table is an ideal solution for precise woodworking tasks. The lifting height is adjustable up to over 1000 mm. The table surface is equipped with wooden pads that do not damage the surface of the processed material. Dcjdpjzp Eq Dsfx Adrok Device description It enables independent work without additional assistance, even with full-size wooden and wood-based panels. The mobility and folding function make the table perfect for situations with limited space in a carpentry workshop or garage. The table can be used for milling, cutting, gluing, and assembly. After finishing work, it can be folded and takes up little space. The very durable steel construction ensures a long service life. The table is additionally equipped with rollers and a locking mechanism. Tilting function available. Technical parameters Maximum length: 2100 mm Maximum width: 1800 mm Minimum length (folded): 1150 mm Minimum width (folded): 300 mm Height adjustment range: 790–1050 mm Base dimensions: 1000 × 1150 mm Weight: approx. 35 kg PLEASE NOTE!!! This product is a return item, has been used, and the packaging is damaged. NO WARRANTY!!!

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 800x500 mm Layout Workbench The CORMAK 800x500 mm layout workbench is a solid and functional solution designed for professionals involved in precision tapping operations. It is perfectly compatible with electric tapping machines and tapping arms, ensuring stability and comfortable operation in every industrial workshop. Its construction has been designed for intensive use, offering excellent quality, ergonomics, and user convenience. Thanks to innovative design solutions, the workbench enables efficient tapping processes while ensuring high precision and reliability for many years of operation. Main advantages of the CORMAK 800x500 mm layout workbench High precision: The workbench is equipped with T-slots spaced 152 mm apart, allowing accurate tool positioning and providing ideal conditions for precise tapping operations. Solid construction: Made of durable materials, the workbench ensures stability and long-term reliability during intensive use, which is essential when working with electric tapping machines and tapping units. Ergonomics and working comfort: The table provides an optimal working height of 760 mm and a spacious tabletop measuring 800 × 500 mm, ensuring comfortable operation and reducing operator fatigue during long tapping processes. Mobility: Equipped with lockable wheels, the workbench can be easily moved around the workshop, allowing flexible adjustment of the working area according to current needs. Functionality: The integrated tool cabinet provides quick access to necessary accessories, improving workflow efficiency and speeding up tapping operations. Design and technology of the CORMAK 800x500 mm layout workbench The CORMAK 800x500 mm layout workbench has been designed with durability and precision in mind. The tabletop, manufactured from materials resistant to intensive use, provides excellent rigidity and stability during operation with tapping machines and electric tapping units. T-slots with dimensions of 3 × 14 mm and a spacing of 152 mm allow secure and precise tool positioning, resulting in high-quality threaded holes. The workbench construction ensures full functionality, enabling convenient handling of workpieces of various sizes. The workbench is equipped with a practical tool cabinet that allows quick storage of accessories, improving workplace organization. Built-in lockable wheels provide mobility, allowing easy movement around the workshop while maintaining stability during tapping operations. Standard equipment of the CORMAK 800x500 mm workbench Tool cabinet: Provides convenient storage of accessories, improving organization and working comfort. Lockable wheels: Allow easy movement around the workshop while ensuring mobility and flexibility. Worktop: Dimensions of 800 × 500 mm and thickness of 50 mm provide excellent rigidity and sufficient workspace for various materials. T-slots: Enable precise positioning and guidance of layout and machining tools. Technical specifications of the CORMAK 800x500 mm layout workbench Parameter Value Tabletop dimensions 800 × 500 mm Dcsdpfovugu Eex Adrsk Table height 760 mm Tabletop thickness 50 mm

Condition: new, functionality: fully functional, Year of construction: 2026, A mobile work table is an ideal solution for precise woodworking tasks. The lifting height is adjustable up to over 1000 mm. The table surface is equipped with wooden pads that do not damage the surface of the processed material. Device description It enables independent work without additional assistance, even with full-size wooden and wood-based panels. The mobility and folding function make the table perfect for situations with limited space in a carpentry workshop or garage. The table can be used for milling, cutting, gluing, and assembly. After finishing work, it can be folded and takes up little space. The very durable steel construction ensures a long service life. The table is additionally equipped with rollers and a locking mechanism. Dcedpfoyw Riwox Adrsk Tilting function available. Technical parameters Maximum length: 2100 mm Maximum width: 1800 mm Minimum length (folded): 1150 mm Minimum width (folded): 300 mm Height adjustment range: 790–1050 mm Base dimensions: 1000 × 1150 mm Weight: approx. 35 kg

Condition: excellent (used), sturdy workbench Dodpfx Adjzmuxrsrsck 1500 x 1500 mm height 835 mm 35 mm thick plywood panel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Device in very good condition. Parameters: Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Dcsdpfx Adev Tbaasrek Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NM - SPM, total length: 13,500 mm, total width: 1,700 mm, total height: 1,700 mm, Equipment: CE marking, Can packaging conveyor with scales and 19 workstations for professionals Equipment description: Up to 250 empty cans can be stored on the line workstations we can make how much you need. Each workstation has a KERN EMB 2000-2 scale Equipment width with workstations no larger than 1700mm Equipment height no larger than 1700mm • Equipment frames made of stainless steel AISI 304 • Belt-chain type and butterfly type • Conveyor for full boxes • Conveyor for empty cans • Two full can conveyors • Empty can feed conveyor • Adjustable speeds • Option to record the work results of each person and a total can counter at the end • At the workplace – Scales - Kerne • Custom-made table production at the line • Control box on one side Dodsw Afyhjpfx Adrjck • Line max. power consumption 3.5Kw • Control box to be agreed with the customer. Easy clean Easy to maintain KERN EMB 2000-2 (2000g, d=0.01g) precision scales. Weighing surface 150mm. Simple and convenient 2-button operation Tare function facilitates formulation work Extremely flat design Ready to use: batteries included 2. Empty cans (aluminum and metal) (99mm) feed conveyor at 2.5m height Equipment description: Equipment frame made of stainless steel AISI 304 Belt type Single line (for one type of cans, of course, you can also put long ones, but they have to be placed manually on the conveyor line, or you can order a separate conveyor as an option.) Adjustable feed speeds Can lifting speed 65 cans / 1min ( Option ) from washing machine (washing machine not included! Option) - Manufacturing time form first payment: 5 months - CE Certificate will be transferred with P/N act. - Warranty - 12 months after the customer receives the equipment at their factory

Condition: used, T-Slot Table, Assembly Table, Work Table, Straightening Table, Used Machine Dedpfxsy Udfas Adrock Overall dimensions: Width: 2690 mm Depth: 660 mm Height: 165 mm Weight: 1415 kg

Condition: good (used), Werkbank, Arbeitstisch, Packtisch Dcodpfeb Tdmyjx Adrjk

Condition: new, This is a robustly built, stainless steel work table with a closed left side, 6 adjustable feet, a storage shelf, and an upstand of 50 mm. Due to its robust construction, it is also very suitable for food production facilities. The work table is new and unused, still with protective film. The stated price is the net price, less a 25% special discount, plus 19% VAT. Your offer price is €1007.78 net. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Dedpfsln Udpox Adreck Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal TECHNICAL DATA: External dimensions WxDxH: 2700x850x900mm Upstand 50mm Left side closed One storage shelf Condition: New, unused SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 – 13:00 and 14:00 – 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2017, Equipment: documentation/manual, * Dimensions (L × W × H): 1,000 × 1,038 × 950 mm * Transport height: 950 mm Dcedjzqbfmopfx Adrek * Overall height including signal light: 2,050 mm * Conveyor segment: 1 × 1,000 mm * PCB size: 100–430 × 50–350 mm * PCB edge distance: 3 mm * Interface: SMEMA * Power connection: 230 V / 50 Hz * Pneumatics: 5 bar, air consumption 3–8 l/min * Electrically adjustable width via stepper motor

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 2,000 mm, total height: 900 mm, Work Table AT 2000 with Beechwood Top and Sliding Door Mobile Baker's Work Table Beechwood Worktop Sliding Doors Dcodpfjyunbqsx Adrok Stainless Steel Construction Dimensions approx.: 2000 x 800 x 900 mm (W x D x H) Used device, cleaned Top sanded & newly oiled Visit our large showroom!