Used Rexroth,Parker, Vickers, Festo Hydraulic-Pneumatic for sale (21,726)

Condition: used, diameter of piston 0 0 stroke length max. 0 0 Ppodpfx Agod Ig Uvegow 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Detailed pictures can be supplied.

Condition: new, Pneumatic Cylinders / Cylinders: Ppjdpfx Agsyvwc Iegsw 1. FESTO Type: DSBG - 160 - 735 - PPVA - 3 (new). Diameter: 160 x 735 2. Type: BOSCH / REXROTH - 4 units. 3. Type: BOSCH / REXROTH - 2 units.

Condition: ready for operation (used), Ross Parker Hannifin MG051210AAAB hydraulic motor, housing diameter: 93 mm, drive shaft diameter: 25.5 mm, mounting hole spacing: 106 mm, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Psdei Ec D Ujpfx Aggspw

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Ppsdpfx Aozpbqteggow Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg in good condition

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 KM No. 6268540 KM No. 6441936 Pjdpjzl Dg Nsfx Aggjpw R901196471

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 850 mm Height: 730 mm Weight: 886 kg Design: Bent-axis, variable displacement type Ppjdpfsy Nnmwox Aggew Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Pedpoy R A Tusfx Aggspw Overall dimensions: Width: 800 mm Depth: 930 mm Height: 730 mm Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 930 mm Height: 730 mm Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Podjy R A Uljpfx Aggjpw Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: ready for operation (used), Hydraulic Power Unit, Hydropack, Rexroth, Used Machine Manufacturer: Rexroth Type: 057-AHAG-G714-0-4-A Dimensions: 870 x 750 x 1570 mm Tank Capacity: 160 liters Pump Type: Rexroth PV7-1A/16, 160 bar Electrical Data: ABB Motor 380-420/220-240 V; 50 Hz; 1.2/2.1 A Number of Valves: 14 pcs Type: REXROTH 4WE 6 D53/OFAG24NK4 Solenoid Pedpfx Asv Dgtmoggjpw 4-way DN6 connection 24 V DC

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ Ppedpfsk Abl Njx Aggsw 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS Ppodsyypb Ropfx Aggjw ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: excellent (used), Hydraulic pump, radial piston pump, Rexroth for Arburg Moog No. D955Z8001 /H Type HZR18A1RKP100TM28R1Z00DS1 100 ccm S/N 20060056 Ppjdpfx Ajzdf H Njggew

Condition: excellent (used), For sale: high-quality hydraulic pump from the renowned manufacturer Rexroth Hydraulics (Bosch Rexroth) – a proven and respected producer of power hydraulics components. PGH series pump (Eckerle system) – noted for quiet operation and high efficiency, used in industrial machinery, hydraulic systems, and automation technology. 📌 Specifications: Manufacturer: Rexroth Hydraulics Model: PGH5-21/063RE11VU2 Type: internal gear hydraulic pump System: Eckerle Condition: used, very good visual condition ✔️ Technical condition: Ppodpfx Ageywpazogsw Pump rotates freely without sticking. Pressure testing not possible. 📦 Applications: industrial machinery hydraulic systems presses, production lines hydraulic power units

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A, 14137. Psdpfx Aolkchrjggepw

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: L030748, overall weight: 2 kg, warranty duration: 3 months, pressure: 7 bar, The Scell-it® E-312NP pneumatic riveting tool for self-clinching nuts offers reliability, precision, and functionality, making the installation of self-clinching nuts quick and easy. Below, we provide additional information regarding the replacement of the nose/mandrel, stroke adjustment, and self-clinching nut installation, to enable you to fully utilize the potential of this tool. Nose/Mandrel Replacement: Detailed instructions for replacing the nose and mandrel can be found in our comprehensive operating manual. If you intend to use self-clinching nuts of different diameters, it will be necessary to change the nose, mandrel, and adjust the tool accordingly. Consult the instructions to learn how to make these changes and adjust the mandrel length to the size of the self-clinching nut. Self-Clinching Nut Installation: After performing the startup procedures and adjusting the stroke, insert the self-clinching nut into the pre-drilled hole. Place the mandrel in the self-clinching nut and press the tool. The mandrel will automatically seat itself in the self-clinching nut. Press the tool trigger to clamp the self-clinching nut onto the component. Ppjdpszc Dx Iefx Aggjw The release will occur automatically after the self-clinching nut has been clamped onto the component, allowing you to release the tool. If the tool is not released from the self-clinching nut, press the button on the back of the tool to force the release. Stroke Adjustment: The tool stroke must be adjusted to the component on which the self-clinching nut will be clamped. The E-312NP riveting tool allows stroke adjustment from 1 mm to 7 mm. To adjust it, follow the instructions below: Precise stroke adjustment is crucial for effective self-clinching nut installation. Here are some tips for controlling stroke adjustment: The stroke can be set from 1 mm to 7 mm. The graduated scale on the tool accurately indicates the set stroke. To increase the stroke, move the adjustment slider towards the front of the tool, while simultaneously turning the knob to the left. Then release the slider, ensuring that it is re-seated on the head. The cursor will indicate the range of the set stroke. To decrease the stroke, follow the same procedure, turning the stroke adjustment knob to the right. Our self-clinching nut riveting tool is designed to allow precise stroke adjustment and ensure optimal installation results. If the stroke is incorrectly adjusted or the self-clinching nut has a quality defect, the mandrel release may be difficult. In this case, use the "anti-block rod," which is included in the kit. Insert it into the hole in the base of the sleeve and turn it to the right to release the self-clinching nut, as shown in the illustration in the manual.

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: If you have any questions or require further information, please do not hesitate to contact us. Pjdpfxjzfg Suj Aggopw

Condition: used, functionality: fully functional, We are offering this used GESIPA FireFox 2, pneumatically and hydraulically powered, with an unknown year of manufacture. Pjdpfxozfg Ngs Aggspw Manufacturer: GESIPA Model: FireFox 2 Drive type: pneumatically and hydraulically powered If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Pedpfxeu D Tz Uo Aggjpw Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Pedpfx Ajy Ibgzoggspw Final sale price with moderate asking: €950,000 Collection only

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio Ppodpjtrpiisfx Aggow - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Podpfexw Rdfox Aggspw Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: refurbished (used), Hydraulic pump, Sperry Vickers Type: GPA2-10-E-30-R-GE 334 Ppedpfsd Szm Tjx Aggjw with attachment, gear motor coupling, Leroy-Somer from Kupplungstechnik

Condition: new, Year of construction: 2018, Available: 3 pieces (new) Parker MADIGAS nitrogen generators are used to produce nitrogen gas from compressed air and are an economical, reliable and safe alternative to traditionally supplied nitrogen in cylinders or in liquid form. Nitrogen is used as an inert, clean and dry gas to eliminate oxygen from products and processes Overall dimensions W 450 x D 609 x H 1034 mm. Minimum/maximum operating pressure 6/10 bar Weight 196 kg Volume 29.3 l Voltage 110/230 V Ppodevdty Topfx Aggew Year of manufacture: 2018

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm Pedpfx Aetndu Ueggspw POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: used, REXROTH HYDRAULIC PUMPS TYPE: A4VSO250 LR26/10 MADE IN GERMANY QUANTITY: 3 PIECES Ppedpfowxl Siex Aggjw PRICE PER PIECE: 2,650 EURO EX WORKS IN EXCELLENT CONDITION, READY FOR LOADING