Used Rodcraft Tryout Press - Hydraulic for sale (26,450)

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Gbsdpfxou N A Eae Ap Dsu Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Gbodpfxjzb Il Ne Ap Dsu Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg Gbjdpfx Apsi Db Ero Dju - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 13500 € 259.2 € 70 to fix 350 mm 900 mm 1050 mm max. 9 mm/s 2 kW 1900 mm Gbsdpfx Apjwiq Auo Dsu 850 mm 2250 mm 1030 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 14400 € 276.48 € 70 to horizontal verschiebbar 350 mm 900 mm 1050 mm max. 9 mm/s 2 kW 1950 mm 1000 mm 2250 mm Gbodpfeypbrxjx Ap Dou 1220 kg 650 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, Year of construction: 2024, neu 2024 7306 prompt, Zwischenverkauf v Italien 11800 € 205.44 € 1 10700 € 50 to horizontal verschiebbar 350 mm Gbsdpfjwiq Anex Ap Dsu 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm 2100 mm 720 kg 550 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 9000 € 173.7 € 30 to fix 350 mm 920 mm 900 mm max. 9 mm/s 0,75 kW 1600 mm 700 mm 2050 mm 430 kg The hydraulic movement of the piston is controlled by a handwheel, Gbsdpsypbuaefx Ap Dsu which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, Year of construction: 2024, neu 2024 7307 prompt, Zwischenverkauf v Italien 11400 € 197.76 € 1 10300 € 100 to horizontal verschiebbar 500 mm 900 mm 1050 mm 25 mm/s 2 mm/s 2 kW 1900 mm 1000 mm 2400 mm 1250 kg 650 mm STROKE 500 MM 2 speeds machine table can be liftet with chains control by handwheel and push button (2-hand) adjustable max. pressure manometer Gedpfswiqu Dex Ap Djbu according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, pressure 80 t stroke 400 mm 930 mm 295 mm total power requirement 4,0 kW 7,4 mm/s 11,5 mm/s Heads 160x95 mm weight of the machine ca. 725 kg dimensions of the machine ca. 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge Gbsdpfx Ajyv Nbcop Dju - Material supports per cylinder in the height adjustable - CE mark

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW Gjdeyv N Ngopfx Ap Dsbu weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 160 t stroke 400 mm 1100 mm 350 mm feed down 6,2 mm/sec feed up 9,8 mm/sec total power requirement 6 kW Gbodpfx Apoyv Ndqo Deu weight of the machine ca. 1.300 kg dimensions of the machine ca. 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 16100 € 309.12 € 100 to fix Gedowiql Ajpfx Ap Dobu 300 mm 680 mm 1020 mm 8 mm/s 5 mm/s 10 mm/s 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2350 mm 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, oil tank capacity: 1,200 l, total length: 3,500 mm, total width: 2,400 mm, total height: 6,000 mm, overall weight: 45,000 kg, installation height: 1,000 mm, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-ton Hydraulic Tryout/Testing Press for Toolmaking and Forming Technology The machine is a tryout/testing press for tools in the field of forming, deep drawing and toolmaking. It is fully functional, ready for operation and can be inspected and tested while powered on. The press frame consists of a 4-column construction, a generous working area and a hydraulic system with REXROTH pump technology. The control system is a SIEMENS S7-1200 with a touch panel and extensive parameterization options. Scope of delivery & Accessories Tool sliding and lifting ball system GÜTHLE Hydraulic foot pedal (GÜTHLE) Roller bolster/carrier console 10 t (GÜTHLE) 4-channel tool clamping system (length 1500 mm, 2 t per channel) Complete REXROTH hydraulic unit Air cooler Condition of the machine Fully functional Hydraulic system is leak-free and runs smoothly Control system & electrical components in good condition Mechanically sound, no visible damage The machine is in assembled condition and can be demonstrated while powered on. Press force: Nominal force: 500 t Max. press force at 250 bar: approx. 510 t Dimensions & Weight: Overall dimensions approx.: 3500 × 2400 × 6000 mm Total weight: approx. 45,000 kg Working area: Table area: 2000 × 1500 mm Column spacing (internal): 2000 × 900 mm Installation height: 1000 mm Stroke: 800 mm (linearly adjustable via linear measuring system) T-slots available (mounting positions to be defined by customer) Hydraulic system: Main cylinder Number: 2 Piston Ø: 340 mm Rod Ø: 280 mm Auxiliary/planing cylinder Number: 2 Piston Ø: 120 mm Rod Ø: 70 mm Draw cushion Force: 150 t Cylinder: 2 × Ø 310 × 210 mm Stroke: 400 mm Pumps and tank Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min Hydraulic tank: 1200 L Oil system: 1000 L filling capacity Speeds Forward stroke: 120 mm/s Return stroke: 150 mm/s Working/pressure stroke: 12 mm/s Control & Safety: Control system SIEMENS S7-1200 + ET200S Gbedpfxsx D Tv Do Ap Dou 12" Touch Panel Schneider Electric Operating modes: Two-hand automatic mode Setup mode Single stroke Stroke without draw cushion Deep drawing mode with draw cushion Measuring & safety components Linear measuring system Novatechnik (63 Bit) for ram and draw cushion Light barriers SICK at the front and rear (height: 1050 mm) Side protective grilles with limit switches Remote maintenance via Ethernet possible Mobile control panel International Note Block (DE/EN) German Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel or loading assistance. Collection only by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony/ Germany

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7700 € 148.61 € 80 to horizontal verschiebbar 250 mm 1040 mm 865 mm 200x120 mm 5 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks Godpfxsypbqzo Ap Dobu table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm Gedpfx Apsvu E T Hj Dobu weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder.

Condition: new, Year of construction: 2026, neu 2026 070240 Oktober 2026, Zwiswchenve Türkei 8300 € 160.19 € 1 100 to horizontal verschiebbar 300 mm 1070 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2430 mm 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks Godswirtzopfx Ap Djbu table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t Godpfx Apjgg Nn So Dobu dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 5000 € 117.73 € 40 to fix 900 mm 900 mm 1600 mm 700 mm 2050 (PSS: 2250) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 Gjdpfx Apjypbvqs Debu PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- Gbedoi A S I Sjpfx Ap Deu right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed Gedpfxsi A S I Dj Ap Djbu The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: new, pressure 60 t stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable. Gsdpfxsi A S I Is Ap Dobu

Condition: new, pressure 20 t stroke 180 mm Gbjdpjupxc Tjfx Ap Dju daylight between the columns 540 x 100 mm dayligth max. 990 mm 72 mm diameter of piston 48 mm weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: new, pressure 10 t stroke 180 mm daylight between the columns 335 x 115 mm dayligth max. 340 mm 56 mm diameter of piston 40 mm weight of the machine ca. 0,05 t Gbodoupxc Hspfx Ap Dju dimensions of the machine ca. 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark Gbjdpfxsyv Nm Ss Ap Deu

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 11000 € 211.2 € 50 to fix 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm 2100 mm 650 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions) Gbjdpjwiq Ahjfx Ap Deu