Used Roller Center Punch With Interchangeable Inserts for sale (25,060)

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B Bodpfx Aowc Nyxspvolk 1 Center Punch Type 487 C 1 Inner Taper Type 487 D As New Condition

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): Bledpfxjuzv Tze Apvek rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Bledpfx Apsy Ui Rnevok Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 24,000 kg, sheet thickness steel (max.): 60 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Bjdpfjxn T H Djx Apvelk Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 1995, Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Bljdpfok Aa N Ajx Apvjk Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2012, TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers Blodpsk Aa Nqjfx Apvjk working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2008, Transnorm Roller Alignment Centering Conveyor 2500-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 700 mm Length: 2500 mm Roller diameter: 50 mm Roller distance:76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm Bodpfx Apon R Uawsvelk including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2008, condition: ready for operation (used), A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible. Blodpfx Apozcp T Rsvjk

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Bjdpek Aa Rrofx Apvelk Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Blodpfx Ajwt Sqhjpvek Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Bodpfjx U Eiajx Apvolk Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Bedpehlnzkjfx Apvjlk Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Blsdpfsxlqnyox Apvsk Center support can only be adjusted manually. Machine location is EU. Ask for additional information!

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. Bsdpfxexb Ucae Apvslk - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Adjustable centering rollers. Blodpfxenqzuyo Apvok As infeed for resaw / multirip saw etc.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, FANUC S-420iF industrial robot available due to production reconfiguration and automation upgrade in automotive manufacturing environment. Previously used in high-volume automotive production for a leading Tier 1 automotive customer. The robot is offered in complete condition and has been operating in an industrial production environment. Key information: • Manufacturer: FANUC • Model: S-420iF • Controller: RJ-2 • Condition: Used / industrial environment • Origin: Automotive manufacturing • Complete unit available • Spare parts available for this model Selected robots remain in active production and can be inspected under power until August 2026. Ideal for: • Automation retrofits • Material handling • Heavy industrial applications Bledoy S A T Ropfx Apvsk • Spare parts or refurbishment projects

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 285 kg, load capacity: 6 kg, arm reach: 1,915 mm, pivoting range: 360 °, controller manufacturer: Yaskawa Motoman, controller model: NX100, input voltage: 400 V, type of input current: three-phase, For sale in excellent condition industrial robot Yaskawa Motoman YR-HP20 6-axis robot with NX100 controller robot model: Motoman YR-HP20-B10 Stable design, 285 kg, 6 kg load capacity and 1915 mm arm reach. The rotation range is 360°, making it versatile for various work processes Robot, control unit, cable, teaching panel, operating instructions robot: Yaskawa Motoman YR-HP20-B10 year of manufacture: 2008.08 load capacity: 6kg repeatability: 0.06 mm Serial number: SBM254-1-3 controller: MOTOMAN NX100 ERCS-HP20-AE00 year of manufacture: 2009.02 voltage: 400v 50Hz Robot Bsdsyhxc Aopfx Apvjlk Range of movement: J1: ±180° J2: +155° - 110° J3: +255° - 165° J4: ±200° J5: +230° - 150° J6: ±360° Speed ​​of movement: J1: 170 °/s (2.97 rad/s) J2: 170 °/s (2.97 rad/s) J3: 175 °/s (3.05 rad/s) J4: 355 °/s (6.2 rad/s) J5: 345 °/s (6.02 rad/s) J6: 525 °/s (9.16 rad/s)

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Payload: 5 kg Bodpov Hdk Iofx Apvolk

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. The machine is available for inspection in Riga, Latvia. Bjdpjzfgmxofx Apvelk The machine is currently powered on and can be inspected by appointment. Additional photos and technical information are available upon request.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter Bjdpezmu I Hofx Apvslk A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Bodpfx Apozq A Ipevelk Pressing force: 130 tons

Condition: excellent (used), Year of construction: 2002, stand-alone unit Hours: 11,800 hours Blsdpozp Dwvefx Apvsk Location available upon request.

Condition: new, functionality: fully functional, overall weight: 24,000 kg, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: MYC1500x6000F4000, Crawler Mobile Mud Stone Separator – Model MYC1500×6000F400O The MYC1500×6000F400O Crawler Mobile Mud Stone Separator is a high-performance soil and stone separation machine developed by Henan Mingyuan Heavy Industrial Equipment Co., Ltd. It is designed for efficient separation of clay, mud, and fine soil from mixed materials such as sand, gravel, and construction waste. With its crawler-type mobility, large-capacity drum screen, and intelligent control system, this model provides a flexible and reliable solution for material cleaning and classification in complex working environments. Applications The MYC1500×6000F400O is widely used in: Sand and gravel production: Removes clay and impurities from raw aggregates, improving product quality. Construction waste recycling: Separates soil and debris for reuse of clean aggregates. Mining and quarrying: Pre-screens and washes ores, removing sticky soil before crushing or beneficiation. Infrastructure and road construction: Cleans and classifies soil and stone for foundation preparation. Municipal and river dredging projects: Separates sediment, stones, and debris from dredged materials. Its crawler chassis allows easy movement on muddy or uneven ground, making it ideal for on-site operations where fixed installations are not practical. Main Features Bledpfxjy Dz U Dj Apvjk 1. Crawler Mobile Design Equipped with a heavy-duty crawler chassis and hydraulic drive, the machine can move flexibly on various terrains. It eliminates the need for additional transport equipment, reducing setup time and improving efficiency. 2. High-Efficiency Drum Screening The 1500 mm diameter and 6000 mm long rotary drum provide a large screening area and high throughput. The wear-resistant mesh panels ensure long service life and easy maintenance. The optimized screen aperture effectively separates mud and fine soil from larger aggregates. 3. Integrated Cleaning System Internal spiral blades and high-pressure spray nozzles work together to wash and separate sticky materials. This dual-action cleaning ensures clean aggregates that meet construction and production standards. 4. Intelligent Control The PLC control system allows adjustment of drum speed, water flow, and feed rate according to material conditions. Automatic overload protection and fault alarms enhance safety and reliability. 5. Energy-Saving and Eco-Friendly The hydraulic-electric hybrid drive reduces fuel consumption and emissions. The water recycling system minimizes water usage, making it suitable for environmentally sensitive areas. 6. Easy Maintenance Modular design and accessible components simplify inspection and servicing. Quick replacement of wear parts reduces downtime and maintenance costs. 7. Strong Adaptability Capable of handling clay-rich soil, river sand, construction debris, and weathered rock. Adjustable screening parameters make it suitable for different particle sizes and moisture levels. Technical Parameters Specification Model:MYC1500×6000F400O Screen Typ: roller screener Roller screener width/:1500 mm Roller Screener Length:6000 mm Feeding Size≤ 600 mm Capacity: 80–300 t/h (depending on material) Power System Diesel engine + hydraulic drive Mobility:Crawler-type chassis Control System PLC intelligent control Water System High-pressure spray, adjustable flow Discharge Dual outlet for clean stone and mud Weight :Approx. 22 tons Dimensions (L×W×H):9,800 × 2,800 × 3,200 mm

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. Blodpfxjzlgf Io Apvek 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: Blsdpfjmk S Slex Apvek 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.