Used Rotary Generator for sale (12,885)

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz Gijdpfx Anjd A Srgjxst - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg sound condition

Condition: good (used), Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Klaschka, rotary pulse generator -Type: DIE/L-1.2-400 -Tension -Dimensions: 160/135/H90 mm Gisdpfxscccxws Anxjt -Weight: 0.8 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. Giedpfx Aoq Nfuzsnxjt 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Gjdpfx Ansq Igyvexoit Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Giedpjfvqmxjfx Anxot

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller Godpfexfrv Eex Anxoit CNC Top Ten bv Coevorden, Netherlands

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Gisdpfeyy U Shjx Anxjt Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: ready for operation (used), Boiler plant for production of steam. Gedpfx Anjy Av Rdexeit Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Gijdsv Uag Ispfx Anxst

Condition: good (used), Revent Single Rack Oven Giodpfxeyw T D De Anxet Rotary Rack Oven Complete with one mobile oven rack In good working condition

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Gsdow U N Daopfx Anxeit

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Gisdpfxoyl Nntj Anxst

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Gjdpfx Anjx U Tgmoxoit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm Gjdpfsy Nc Rwex Anxsit MACHINE DETAILS Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle Gisdeu Dbucepfx Anxjt minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 10 pcs in stock =Scope of supply= Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. Gsdpfx Aoy Hcvbenxeit set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 12V4000L64FNER Electrical power - 1521 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 53.2 VL6 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: used, Year of construction: 2013, functionality: fully functional, Mobile valve machining / turning machine Unigrind FDA 500 for sale. The machine is used, in good condition and fully operational. Inspection and testing on site are possible. The Unigrind FDA 500 is designed for machining and repair of valve sealing surfaces, seats, and flanges. The equipment allows precise turning, milling, and surface refurbishment directly at the worksite. Gijdpfey R R Imex Anxst Specification: Model: Unigrind FDA 500 Year: 2013 Mobile valve machining machine Suitable for repair of valves, flanges, and sealing surfaces Accurate machining of flat and conical surfaces Fits various types of industrial valves Compact and robust design Professional industrial equipment German quality More info: Unigrind FDA 500 Suitable for energy, oil, gas, chemical, and industrial companies as well as repair workshops. If you have further questions, we will be happy to assist you.

Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table. The equipment is in good condition and fully operational. Inspection and testing on site are possible. The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components. Gijdpfx Aney R Rl Sjxet Specification: Model: Unigrind KSM600 Stationary flat surface grinding/lapping table Intended for machining flat sealing surfaces Suitable for valve, gate, and flange repair Robust industrial housing Stable and precise processing Simple and user-friendly operation Professional industrial equipment More information: Unigrind KSM600 Suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 1988, functionality: limited functionality, gear diameter: 320 mm, workpiece weight (max.): 10,000 kg, total height: 2,000 mm, total length: 2,900 mm, total width: 2,000 mm, workpiece diameter (max.): 320 mm, Straight bevel gear machines type 5C267P, made Stanko in 1988 year, completed, need starting works for electric and hydraulic part. Slightly used, mechanical part in good condition. Available for sale two pieces. Price is 35000 Euro for 1 machine. Gisdpfx Ansykmdisxst

Condition: good (used), Cyklos RPM 350 Plus Automatic Rotary Perforator Gsdpfx Anjy Sd Upexjit Machine in very good condition, ready for production. Description: Automatic perforating device with a working width of 350 mm. Frictional sheet feed. Capable of producing 1-5 perforation lines per sheet. Feeder and output tray adapted to A3 and smaller formats. Easy to use. Option to upgrade with a creasing disc. Sheet counter. Adjustable feed speed from 70-130 sheets per minute. 230V power supply. Weight 20 kg. Made in the Czech Republic.

Condition: refurbished (used), functionality: fully functional, Universal Processing System: FESSMANN systems are typically designed for multiple processes, which may include: Drying,Smoking (Hot or Cold),Cooking (Boiling or Steaming),Reddening / Maturing, Roasting / Baking Smoke Generator: The "RZ" model designation often points to a smoke generator unit, which is an essential component of a larger smokehouse or universal system, providing the smoke for the chamber. However, given the full stainless steel structure, it might be a compact, integrated unit. Technical Data: Model: RZ 7 108 Voltage (Main) 380V 3Ph 50Hz (Three-phase) Control Voltage 230V∼ (Alternating current) Motor Power 0.3kWHeating Gsdpfxsxv Smrs Anxeit Power 1.1kW Smoking ClassZH1 216 1.1

Condition: good (used), functionality: fully functional, The VEMAG Smoke Gen Model: 501/E is a dedicated smoke generation unit manufactured by VEMAG ANLAGENBAU. It is designed for industrial use, providing consistent smoke output for commercial smoking and cooking houses. Performance & Control Manufacturer Quality: Produced by VEMAG ANLAGENBAU, a highly regarded name in food processing equipment. High Generation Rate: Capable of a Generation Rate of Up to 250m3, making it suitable for large-volume smokehouses. Reliable Power: Operates using an industrial Operating volt of 400 V / 50 Hz, ensuring stable power delivery for continuous operation. Controlled Power Consumption: Has a Total power of 26 A and a Fuse of 35 A. Operational Benefits Industrial Connection: Features a Tube Connect of DN125 for robust and secure integration with the smokehouse ductwork. Durable Construction: Built with stainless steel, ensuring longevity, resistance to the smoking process, and simplified cleaning. Excellent Condition: This unit is ready to be connected and put into service, offering reliable smoke generation performance. Giedpfx Aexv Srhsnxet

Condition: used, Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Type: TC 700 T Overall dimensions: Width: 1020 mm Gijdpsypvmksfx Anxst Depth: 870 mm Height: 740 mm Weight: 865 kg Electrical specifications: 400V; 6.8A; 3.34 kW Table diameter: 700 mm

Condition: ready for operation (used), Column Jib Crane, Swing Crane, 80 kg Crane, Used Machine Gedpfx Aov R Du Usnxjit Load Capacity: 125 kg Column Height: 3800 mm Jib Length / Reach: 1650 mm Chain Hoist: Demag PMV5-V2F6 Load Capacity: 80 kg Electrical Data: 400 V; 0.3 kW; 1.5 A

Condition: ready for operation (used), Column crane, jib crane, 80 kg crane, used machine Gijdpfxjwfrgas Anxot Load capacity: 125/80 kg Column height: 3200 mm Jib arm length / outreach: 1700 mm Chain hoist: Demag PMV5-V2F6 Electrical data: 400 V; 0.05 kW; 1.5 A