Used panel saws with a cutting length from 4000 to 4999mm for sale (63)

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS Pgjdpfjxy Ng Rsx Ab Isw HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPP 350/43/43/X Machine type: Beamsaw Year of manufacture: 2008 Operating status: still connected Cutting length 4.300 mm Width of lifting table 2.200 mm Number of grippers 8 Feedrate max 150 m/min Saw blade projection 80 mm Saw blade diameter max 350 mm Scoring saw Yes Labelling manually Lift table loading from behind Stop side Pedpjxwwfvofx Ab Ijgw Right side HOLZMA | HOMAG Machine table with air nozzles throughout Control HOLZMA CADMATIC 4.1 Declaration of CE-conformity Conformity marking CE mark Space requirement Length 8,2 m Space requirement Width 6,5 m

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting depth: 3,300 mm, TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Cutting depth (material pusher positioning): 3,300 mm Cutting height: 90 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Other Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Psdpfx Aextfhwob Iegw Machine height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at infeed) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Performance and Speeds Main saw motor power: 15 kW Forward saw unit speed: 5 – 120 m/min Return saw unit speed: 120 m/min Forward feed speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Reverse feed speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 90 mm Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Pgedpfx Asqi Azpob Isw Errors and alterations in the technical datas and informations excepted!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 542798, cutting length (max.): 4,200 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 355 mm, cutting height (max.): 80 mm, main saw diameter: 355 mm, total length: 6,470 mm, total width: 6,450 mm, overall weight: 5,300 kg, saw drive: 9,000 W, input frequency: 50 Hz, input voltage: 400 V, power: 10.1 kW (13.73 HP), air pressure: 8 bar, saw blade bore: 30 mm, year of last overhaul: 2013, Equipment: scorer, Very well-preserved MAYER PS 9 Z panel saw, upgraded in 2013 (new PC, new PLC, new software, new control panel) Panel Saw Model PS9Z ECO - 4200 - Feed speed continuously adjustable from 5 - 70 m/min, return 80 m/min. - Dust channel for connection to extraction system - Pressure beam with central suction pipe - Automatic cutting length adjustment via sensor technology - Saw carriage runs on hardened and ground round guides. The drive is via rack and pinion (no chain), ensuring uniform feed and enabling high travel speeds. - Quick-release device for main and scoring saw - Saw hood interlock and louvered safety guard on the pressure beam - Recesses for package clamp in the pressure beam to enable complete cutting of panels without offcuts - Automatic cutting height adjustment (2 stages) - Swiveling control panel - Completely enclosed machine, especially in the pressure beam area - Transparent louvered safety guard allows operator to view the cutting line - Turret stop on the saw carriage The machine is dust-tested and bears the GS mark (No. 951061) as well as the CE mark (No. 951062) Saw motor: 9 kW Saw blade: 355 mm Cutting height: 80 mm Saw blade projection: 105 mm Cutting length: 4,200 mm Voltage: 400 V / 50 Hz Scoring unit - Scoring unit with pneumatic lowering during return, scoring motor 1.1 kW, for 127 mm scoring blade, convex. Left angular table 2000 x 600 air cushion - Air cushion angular table, on the left facing forward 2000 mm long, 600 mm wide, with 2000 mm long angle stop rail Auxiliary table 2000 x 600 air cushion - 3 auxiliary air cushion tables facing forward, size 2000 x 600 mm Material pusher travel distance 4200 mm - Double-guided material pusher, driven by rack and pinion and AC servomotor, forward speed 25 m/min, return 60 m/min - Separate measuring system via precision measuring racks and rotary encoder, rear support table with 11 twin roller tracks - Cutting length: 4,200 mm - Travel distance: 4,200 mm Package clamp opening height 80 mm - Package clamp on the material pusher (opening height 80 mm) with double-fingered design Pressing device 20 - 1200, automatic - Lateral pressing device operates automatically - For workpieces from 20 to 1200 mm Pgjdpfx Abexy Rwqo Ijw - Manual presetting to workpiece width required automatic edging device - Device for automatic approach to the edging position by the material pusher Electronic control and PLC updated to PC6200 in 2013: - New PC - New software - New PLC - New control panel Machine is operational and can be inspected/tested at any time. A forklift is available for loading.

Condition: excellent (used), operating hours: 565 h, functionality: fully functional, machine/vehicle number: 0-240-10-3388, incl. panel storage and loading system, Bargstedt, Type: OPTIMAT TLF210 /12 /12 Recorded operating hours: 565h Cutting length: 4300 mm Cutting width: 4250 mm (program pusher travel) Saw blade projection: 95 mm Psdpfx Asw R Ur Ueb Iogw Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW POWER CONCEPT ANGLE CUTTING PACKAGE GROOVE CUTTING PACKAGE AUTOMATIC EJECTION FENCE (pushes panel remnants from the rear machine table to the front over the cutting line) LABELING PACKAGE CONTROL: POWER CONTROL: CADmatic 4-Professional DATA CONNECTION TO STORAGE SYSTEMS

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Psdpfxsxvz T Is Ab Iegw Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Pgjdpfxexfvp As Ab Iow Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Pgsdpfx Absxranps Ijw Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Panel saw Giben Prismatic 2 SPT H.100 with rear loading Pgedpfx Aexyq I Neb Iow Year of production: 2003 Technical condition: very good Technical details: 4500 mm wide rear loading panel saws with 7 panel feed clamps, side lay-down, 4 air cushion tables of 1300x500 mm and one of 2000x500 mm. Cutting height 100 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2011 Saw blade projection max. (0°): 72 mm Saw blade diameter max .: 350 mm Main saw motor: 14 kW Scorer aggregate Scorer saw blade diameter max .: 180 mm Scorer aggregate, manually adjustable Package height max. (0°): 60 mm Saw aggregate forward: up to 100 m / min Saw aggregate backward: up to 100 m / min Feeder: up to 120 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 6 pcs grip push clamp Regulation of clamp force at control desk stepless Number of stop jaw: 2 pcs Clamp opening: 82 mm Podpfx Aek T Aw Ssb Isgw Strip aligner before the pressure beam Air cushion tables: 3 pcs. 1800 x 600 mm Angular cutting device WSA Motor-driven cutting height adjustment for the main saw, infinately Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Formatting device This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: TRK 3 5220A Year of manufacture: 1994 Cutting length: 430 cm Cutting height: 220 cm Cutting depth: 80 mm Power: 4.4 kW Saw blade diameter: 300 mm Pgodpfoxwb Sgex Ab Iew Speed: 4,750 rpm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Pgodpfjxpu Rgjx Ab Iow Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables Pgodpfexmk Ebjx Ab Iew - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: excellent (used), Year of construction: 2022, Selco WNT 630 Beamsaw working size 3800x2200 with back lift table Technical specifications: Max cutting lenght: 3800 mm, Saw blade projection: 108 mm, Pgedpfx Absv T Sdij Isw Max gripper opening: 100 mm, Min panel size: 1830 x 915 mm, Max panel size: 3660 x 2200 mm, Max packet hight: 630 mm, Min. thickness on lift table: 10 mm, Lift table max lift: 985 mm, Lift table capacity: 5 t Back loading table or side loading oppening for panels 3800 x 2200 mm

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Panel saw Holzma HPP 22 Year of manufacture: 1997 Technical condition: good, machine fully operational Psdsxvybqopfx Ab Iogw Technical data: - Maximum panel size: 4200 x 200 mm - Saw blade projection: 140 mm - Cutting length: 4300 mm - Installed power: 26 kW

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Pedpfx Abext Sgto Iegw

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder Pgedpfov N D E Rsx Ab Iow - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 00103, feed length X-axis: 4,800 mm, feed length Y-axis: 4,800 mm, feed length Z-axis: 100 mm, cutting length (max.): 100 mm, cutting height with scoring (max.): 90 mm, saw blade diameter: 400 mm, cutting height (max.): 110 mm, total length: 7,500 mm, total height: 1,700 mm, total width: 6,600 mm, overall weight: 7,700 kg, input voltage: 380 V, compressed air connection: 7 bar, Panel saw with a cutting length of 4500 mm, equipped with a rear table for panel loading. The machine is operational and will be disassembled due to installation of a new machine. Pedpfxoxwqlpe Ab Iegw

Condition: good (used), Code: 0188 Psdpfsw Ec Riox Ab Ijgw Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: excellent (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, HOLZMA HPP 350/43/43 from 2011 The machine is 100% efficient, dismantled and ready for transport. The machine has worked 20 thousand mth Psdpovzxa Tofx Ab Iogw Complete documentation for the machine. We provide a start-up WARRANTY!! Possible transport

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 105,000 EURO!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase a NEW, premium panel saw—HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage integration. The SAWTEQ B-400 is a panel saw from HOMAG equipped with automatic loading for high-speed cutting. This efficient saw is designed for handling large panel volumes and delivers superior-quality finish cuts. It is renowned for reliability, precision, high power, and rapid processing speed. The unit offered here is BRAND NEW. It was bought from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The HOMAG POLSKA Sp. z o.o. service team performed only the initial startup; the machine has never been used since. In the woodworking machinery industry, both Homag and this model are benchmarks—Homag is a global leader in modern, top-quality equipment. Our unit is exceptionally well-equipped, offering almost all available options. A similar saw in its standard version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and equipped with additional features, is valued at around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput thanks to automatic loading and extended saw blade reach. - High productivity with relatively low space requirements. - Designed for efficient material flow and precise logistics. - Network-ready for digital production processes. We maintain direct contact and support from HOMAG for installation and commissioning at the buyer’s site if needed. In our view, the discount of over 45% off the new price represents an extremely competitive offer for anyone seeking a modern saw with or without future automatic storage needs—resulting in potential savings of about 90,000 EURO net (approx. 400,000 PLN net)*. The saw can be operated independently without connection to an automatic storage system. General details regarding this sales offer: Podpew Exk Esfx Ab Iogw - The machine is BRAND NEW, but was manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The advertised price does not include VAT (23% for Polish buyers), which will be added to the invoice—please check our listed price presentation. - Single owner. * Price in EUR converted at the NBP rate—1 EUR = 4.25 PLN. Welcome to all MachineSeeker users. We are new to MACHINESEEKER. We are not a furniture manufacturer, machinery trader, or production company. We are a developer with extensive property holdings in Poland, constructing homes and apartments in Warsaw. The machines we offer are our property, acquired as settlements from tenants in the furniture industry. We know their full history and confirm their condition as described. We also maintain relations with machine manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—who can provide further support. As we do not require these machines, our pricing is extremely attractive, especially considering their almost-new state. We can assist with delivery anywhere in Poland or the EU. Prospective buyers are welcome to inspect equipment before purchase. Kind regards.

Condition: used, Year of construction: 2007, functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm back loaded + rotation table + air cushion table at cutting line Pjdpfxowg Avzs Ab Ijgw motor 18 kw sawblad Ø520 mm scorringblade Ø200 mm 12 pcs grippers on the pusher MACHINE AVAILABLE FROM WEEK 46/2025 price is EX factory

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0-341-07-8718, feed length X-axis: 3,800 mm, feed length Y-axis: 3,800 mm, feed length Z-axis: 85 mm, cutting length (max.): 3,800 mm, cutting height with scoring (max.): 85 mm, saw blade diameter: 420 mm, power: 14 kW (19.03 HP), For Sale: HOLZMA HPP 250/38/38 Beam Saw Year of manufacture: 2013 Model: Optimat HPP 250/38/38 Cutting dimensions: 3800 mm x 3800 mm Pgodpfx Abew Ud Rue Isw Condition: very good, used in single-shift operation Maintenance: regularly serviced Equipment: PICA 2 label printer Without optimization software CutRite Power supply: 400V / 50Hz, 3-phase Maximum operating full load current: 26.8 A Control voltage: 24V The machine is in excellent working condition, immediately available, and can be inspected under power.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Pgodpexf Eg Defx Ab Iow Return speed of pushers: 60 m/min MACHINE DETAILS Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading