Used Roundness Measuring Machine for sale (68,546)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, and shafts, as well as eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing the system's setup, except for the computer, which is a newer model from HP with a small form factor.... Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible by measuring in two halves, up to a maximum of 1000 mm....) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg, where it was used in a "medically clean environment." It is extremely clean and has never been in a dirty machine hall. Hfjdozcqy Eepfx Aflok The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password....). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional schematics are also included! The system will be shipped on two Euro pallets using a freight company. It is already securely fastened to them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and stretch film to provide maximum protection for transport. The system itself is secured with "transport safety screws"... Shipping costs within Germany are included, I will cover them!!! So, within Germany: FREE SHIPPING!!! The measuring system should definitely be set up and commissioned by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system may be damaged when it starts up... A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Hfodpfx Afezrd R Uoljk Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: GLAA000683IA, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, Shop-Floor package The Shop-Floor capability package ensures reliable results even in the challenging conditions of shop-floor environments. Advanced multi-sensor structural thermal compensation enables GLOBAL S to compensate for fluctuating temperatures (15-30 °C range) while covers and bellows provides a higher level of protection from dust and dirt. The package includes a selection of options ideal for shop-floor dimensional inspection workflows. The kit includes: • Advanced multi-sensor structural thermal compensation Hfodjzuk Acopfx Aflek • Machine accuracy specifications in the Shop-Floor Temperature range 15-30 °C • Machine improved accuracy specifications in the Extended Temperature range 16-26 °C • Bellows and cover for the X axis and Y axis (left side). Accuracy: MPE (E0,MPE/ E150,MPE) = 1.5 + L/333 μm MPE (THP)/ MPE (τ)= 2.9/45 μm/seconds Measuring range: X = 500 mm; Y = 700 mm; Z = 500 mm; High speed: Max 3D speed: 500 mm/s Max 3D acceleration: 1700 mm/s2 DC241 Controller NJB Jog-Box PROBING CONFIGURATION HH-A-T2.5° Automatic Probe Head The HH-A-T2.5 is a ram mounted probe head that is capable of indexing in 2.5° increments and can achieve 12,240 unique positions. The head features a number of new innovations including an embedded controller and capacitive crash protection. Technical Specifications: • Indexable axis A (Roll): +105°, 2.5° index • Indexable axis B (Pitch): +180°, 2.5° index • Rotation Speed: 90° in 2.5 sec. • Max applied torque: 1.4 Nm • Probe Mounting: TKJ Kinematic Joint • Max. Extension bar: 450 mm HP-S-X1S Scanning Probe The HP-S-X1 supports all the standard probing modes like: Single Point Probing, Self-Centering as well as Continuous High Speed Scanning for fast and accurate form and profile measurements. The HP-S-X1S kit includes: HP-S-X1S scanning probe, Styli stet and the AC/DC probe interface. HP-S-X1S Technical Characteristics • Probe Type: Analogue • Probe Dimension: Ø 30 mm x 109 mm • Styli Length Range: vertical: 20 - 115 mm; horizontal: up to 20 mm • Max. Styli Weight: 20 g (incl. styli clamping) • Styli holder Weight: 7 g or 8 g • Stylus Joint: M3 thread • Over Travel Range: ± 2 mm in all axes Ceramic Calibration Sphere: Ø 25 mm TOOL CHANGER HR-X1 Automatic Styli Changer Rack – HR-X-400 The HR-X1S / H styli changer is available from min. 3 ports to max. 9 ports. It allows a fast styli changes, in automatic mode, during the measuring cycle Standard version supplied with 3 ports - HP-X1-P-SF. Styli holder HP-S-X1S-1 (2 pieces) Styli holder HP-S-X1S-2 (1 piece) PC DELL 3630 Workstation Desk Extension PC-DMIS CAD++ EATON 9SX 2000 UPS

Condition: excellent (used), CATALOGUE NUMBER 8015 TECHNICAL DATA - Range of diameters of processed pins: 40-140mm - Max. diameter of input material: 210mm - Min. length of input material: 600mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 100mm - Cutting head drive motor: 18.5kW - Feed: + forward/backward - Feed motor: 3.73kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-knife cutting head - 6 smooth draw rollers - Dimensions (L/W/H): 2600x1200x1390mm - Weight: 1700kg Hfedpfoztafkjx Aflsk ADVANTAGES - Polish production - DTR documentation - Used turning machine, very good condition Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough Hfjdpfxszrui Ij Aflsk - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse Hsdpfx Aszcc Rveflsfk - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Year of construction: 2002, condition: used, x-travel 210 mm z-travel 350 mm max. loading 25 kg Distance C/Z-axis (mm) 270 mm max. test diameter (mm) 300 mm Rotation axis C (turntable) 0° 90° 180° 270° diameter of rotary table 150 mm Measuring path R-axis 170 mm required space L2,0 x B0,8 x H0,82 m Scope of delivery: - Form measuring system F1004/350 - Work table - Rotary table (rotation axis C) - All documentation - Software TURBO FORM 8.21 + licences - Accessories (see pictures) Condition: - As good as new Hfjdpfxsrxxc Hj Aflsk - Functional Maintenance: - Last inspection on 03/08/2021 - Test report from Jenoptik available

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm MITUTOYO Euro-M 544 Coordinate measuring machine Measuring machine Hjdpfxstycuce Aflofk Size of the base plate: 850x850mm Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not part of the delivery.

Year of construction: 2019, condition: excellent (used), Image-guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 series Year of manufacture: 2019 Control system: Keyence Technical data: ----- • Camera chip: 4 MP CMOS • Measuring range: 600 x 300 x 200 mm • Smallest display unit: 1 µm • Smallest angle: 0.0001° • Repeatability (locked): ±3 µm • Maximum table load: 25 kg • Display: 15" TFT • Weight: 40 kg Accessories: ----- • Manuals Hfodpeih R Uxsfx Aflek • As-delivered condition (Datasheet attached)

Condition: used, Year of construction: 2011, length 300 mm centre height ca. 30 mm diameter 0,5 - 52 mm weight of the machine ca. 0,103 t Hsdpfx Afswmwwajljfk dimensions of the machine ca. H 0,84 x L 1,00 x P 0,435 m Serviced and calibrated by Studenroth on 24.07.2024 Length and diameter measuring device: Equipment/accessories: -Software -monitor and computer -Technical documentation

Condition: used, Year of construction: 1992, x-travel 1400 mm y-travel 1200 mm z-travel 1000 mm Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,5 x 2 m Hfedsftfczspfx Aflsk

Condition: not inspected (used), Mitutoyo Quick Vision Apex QV-X404P1L-C CNC Image Measurement System Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Year of Manufacture: 2007 Machine Type: CNC Image Processing Measurement System Measuring Range: approx. 400 × 400 × 250 mm For sale is a used Mitutoyo Quick Vision Apex CNC Image Processing Measurement System for non-contact dimensional measurement and inspection tasks. The system is offered including the existing PC workstation, two monitors, Mitutoyo control unit, installed QVPAK measurement software, documentation, and other accessories as shown in the pictures. The existing PC system and QVPAK software start. However, the complete machine and measurement function could not be fully tested. Technical Data: Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Year of Manufacture: 2007 Country of Manufacture: Japan Measuring Range X / Y / Z: approx. 400 × 400 × 250 mm Measurement Principle: non-contact optical image measurement Control: CNC Measurement Software: Mitutoyo QVPAK Software: QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010 Dimensions: Machine and transport dimensions have not been verified and are therefore not provided as binding information. Equipment: Mitutoyo Quick Vision Apex measurement system PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop Installed QVPAK measurement software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece holder Connecting cables and accessories as shown in the pictures Transport Data: Transport by forwarding agent is possible. Exact transport dimensions and transport weight must be agreed upon before collection or shipment. Condition: Used condition with age- and usage-related signs of wear. Visible damage is present on the machine housing, see pictures. The PC system and the existing QVPAK software start. However, the complete machine and measurement function could not be fully tested from a software perspective. Due to the age of the existing PC system, suitable drivers could no longer be provided or installed for individual hardware components. Therefore, complete communication between the measurement system, PC hardware, and measurement software could not be verified. The machine is explicitly offered as untested or for re-commissioning by qualified personnel. Scope of Supply: Mitutoyo Quick Vision Apex QV-X404P1L-C including PC workstation, two monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Hjdpfjztyabex Afljfk The machine is available for short-term delivery. Inspection possible by arrangement. The scope of supply is as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors Hodpfxot Akt Rs Aflsfk FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Hjdpfx Afogd T R Dolofk Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Hfodewwt Ddjpfx Afljk Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: excellent (used), Year of construction: 1997, Measuring Range X – axis 500 mm Y – axis 600 mm Z – axis 300 mm Accuracy acc. ISO 10360 E = [3,0 + 4,0L/1000] µm at temperature range 18 … 22 °C max. workpiece height 440 mm wax. workpiece weight 250 kg base material granit dimension measuring table 640 x 1280 mm fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC5 DC motors all axis Guideways air earings Hfjdpfxjfmp Ttj Aflsk Tilt&swivel head Renishaw PH9 Probesystem Renishaw TP200 Probe Changer SCR200 Computer Workstation (Windows 10) Software MCOSMOS-1 V2.4

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm The device is not functional! Hjdpfxeicnk Ee Aflsfk Chassis for sale.

Condition: used, Year of construction: 1992, Measuring range, X-axis: 2400 mm Measuring range, Y-axis: 1200 mm Measuring range, Z-axis: 1500 mm Hjdpfx Afog Er Nlolofk Machine weight: approx. 9.00 t

Year of construction: 2014, condition: ready for operation (used), X-travel: 700mm, y-travel: 1000mm, z-travel: 660mm, resolution: 0.039μm, max. load: 900kg, measuring plate height: 600mm, weight: 1.255t, operational hours counter: ca. 10,000h, with documentation. Hodpfx Afoip D N Ijljfk

Year of construction: 2006, condition: ready for operation (used), Max. workpiece height: 200mm, max. load: 150kg, length: 1300mm, width: 1274mm, height: 1940mm, weight: 1.1t. Hedpfx Aog E Uh Usflefk

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Hjdpfxszqc Hrj Aflofk The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.

Condition: used, Year of construction: 2010, 2010 Carl Zeiss CONTURA® G2 RDS Bridge Type CMM Hsdpfx Afozt Satelsfk Axis Travel 'X'=700mm , 'Y'=1,000mm , 'Z'=600mm. Maximum Table Load 730kg. Volumetric Accuracy 1.7 + L/300µm. Table Dimension L1,050 x W827mm. Zeiss RDS Vast XXT Articulating Scanning Probe (2.5º increments). Distance Between Table And Probe Head 716mm. With Calibration Sphere, Joystick Control & 3 Position Probe Rack. Overall Weight 1,550kg.

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Hfsdpfew H Auwex Afljk

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Hfedpfx Afjw H Auqelsk

Condition: ready for operation (used), Year of construction: 2015, Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Hfjdpfx Asy R Dr Eeflek