Used Ruhrmann Eccentric Press for sale (12,768)

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm Iiodpjvnmblefx Ahnjg - Weight approx. 13000 kg

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Iijdeyc R Uiepfx Ahnjg Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Iedpsyc R Nmefx Ahneig Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1990, machine/vehicle number: 9417, functionality: fully functional, operating hours: 85,640 h, power: 28 kW (38.07 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 50 t, stroke length: 51 mm, total length: 1,820 mm, total width: 2,890 mm, total height: 3,090 mm, Pressing force: 50 t Iiedpfxezp Ukyo Ahnsg Adjustable ram stroke: 16 - 51 mm (currently fixed at 51 mm) Ram adjustment: 64 mm Table clamping surface area, approx.: 930 x 590 mm Number of strokes per minute: 100 - 750 min-1 Power consumption: 28 kW

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm Ijdpfouild Aex Ahnoig ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: used, Year of construction: 1948, total length: 1,900 mm, total width: 1,250 mm, total height: 2,650 mm, Colour: Green Empty weight: 5.000 kg - Year: 1948 - Documentation available: No - CE certificate present: No - Serial number: 100150 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 13 - Max. stroke [mm]: 127 - Table length [mm]: 650 - Table bore diameter [mm]: 650 - Ram width [mm]: 250 Iiedpfx Ajz Au Ulehnog - Throat depth [mm]: 310 - Max. opening height [mm]: 330 - Height adjustment [mm]: 80 - Pressing speed [mm/s]: 235 - Transport dimensions: 1900mm x 1250mm x 2650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, machine/vehicle number: 10638, functionality: limited functionality, operating hours: 49,125 h, power: 37 kW (50.31 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 80 t, stroke length: 63 mm, table width: 900 mm, table length: 1,200 mm, Pressing force: 80 t Adjustable ram stroke: 16 - 63 mm (Currently fixed at 63 mm; stroke adjustment is not possible because the shift shaft for stroke adjustment is bent.) Ram adjustment: 76 mm Isdpfozp U Avex Ahnoig Table clamping surface approx.: 1200 x 900 mm Number of strokes per minute: 50 - 600 min-1 Power requirement: 37 kW

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 45 t, table width: 810 mm, table height: 360 mm, Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance above table:: (adjustable) 240-300mm Table size: 810x360 Iodpfx Ahju Dkc Aenoig Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm

Condition: used, Year of construction: 1987, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,500 kg, Eccentric press EBU H16 Year of manufacture: 1987, 1500 kg, 1.1 kW Location: Bad Tölz Iedpezv Sl Iefx Ahneig Inspection is welcome. We have other used machines available. Please contact us.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Thrust (ton) 100 Number of connecting rods 1 Bed size (x-y/mm) 950 x 660 Ram size X-Y (mm) 550 x 460 Stroke (mm) 20 - 160 Iiodpfxoz Aukge Ahnsg Slide adjustment (mm) 80 Distance to the top dead center (mm) 370 Strokes per minute 70 - 130 Motor power (kw) 25 Equipped with Soprem die, width 400 mm, capacity 1250 kg Beckhoff control

Condition: used, Year of construction: 2000, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 400 t, stroke length: 75 mm, overall weight: 2,000 kg, MIOS T40 with adjustable speed and with pneumatic feeder. Isdpjz Dg S Aefx Ahnsig

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Iiodpfxstq Eqxs Ahnog

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Iiedpfx Ahjzv Skdeneg Year of manufacture: 1977 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 200 V, pressing force: 80 t, stroke length: 100 mm, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Iiodpfx Ahsu E U Nioneg Year of manufacture: 1983 pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: good (used), Year of construction: 1985, power: 1.5 kW (2.04 HP), overall weight: 1,700 kg, Eccentric press EBU H25 Year of manufacture: 1985 Iedpfx Ahozv Sitsnsig Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Ijdez Alg Sopfx Ahnsig Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Iiodpsdzqddofx Ahnog Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Iiedpfezvdm Rex Ahnjg Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Model: PD 63 Press force: 63 tons Press dimensions L x W x H: 1800 x 1300 x 2500 mm Press weight: approximately 4500 kg Table dimensions L x W: 700 x 550 mm Table opening L x W: 265 x 265 mm Ram L x W: 320 x 300 mm Pusher stroke: 135 mm (fixed) Ijdpfew R Tl Tjx Ahneig Maximum distance of the ram from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Commands: single (foot pedal, two-hand control), continuous (automatic mode - setting the time interval 1-99999 seconds and the number of repetitions 1-32000) A special function for determining the lower position of the ram Automatic machine lubrication Pneumatic activation and braking. Note: Two identical presses are offered (the only difference is in the size of the display: 7" and 4.3"). Technical documentation is not available. Online assistance from a programmer for PLC programming is possible. Shipping costs are additional. Urgent sale, due to a change in business, the presses are no longer needed for production, and I need more space for new equipment. The price is absolutely fixed; after March 1st, they will be disconnected from the power supply.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 Iiodpfxju Hav Re Ahnsg pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Iijdpfx Ahsyn Rhysneg Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm Iodju Hautjpfx Ahneig total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 60 t, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, year of last overhaul: 2021, compressed air connection: 5 bar, ram adjustment: 90 mm, warranty duration: 5 months, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm Isdpou Haqhefx Ahnsig total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Iiodpjykl Iaofx Ahnjg Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, Year of construction: 1963, total length: 2,300 mm, total width: 1,500 mm, total height: 2,880 mm, Empty weight: 8.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Drive system: Conventional - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iisdpfx Ajwmfrrjhnsg Lukas van Rossum