Used S+S Rz 170/67/290 for sale (70,944)

Year of construction: 2006, condition: excellent (used), The device is in working order and was only used for testing purposes. Lredpfx Aneh Im Eqe Iep A funnel is included.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-7, empty load weight: 435 kg, maximum load weight: 2,265 kg, overall weight: 2,700 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 276 170 2700 2 NEW VEHICLE Internal dimensions: 276cm x 170cm Side wall height: 30cm Loading platform height: 65cm Gross weight: 2,700kg Payload: 2,265kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls with tension locks Folding and removable on all sides 15mm thick, non-slip and durable phenolic plywood floor Automatic jockey wheel with 400kg bearing load 8 noise-dampening lashing rings with 800kg tensile strength Reinforced 13" C-rated tires with steel valves M+S tires Net/rope hooks on frame 13-pin plug LED front marker lights Rear lights with reversing light, fog light, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY PRICE-REDUCED FROM FEBRUARY 2026 ONWARDS - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without sidewalls (discount) - Sidewall height increase to 35cm - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps 2,800kg - Steel plate over floor - Full LED lighting - Anti-theft device - Fine or coarse-mesh net - H-frame - Mesh side panels available in various heights, including closed designs - 30cm add-on sidewalls with tension locks - Flat tarp with or without bows - High tarp 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration documents: €200 net Images are exemplary and may show optional equipment at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles available in stock for immediate pick-up. Our workshop is open for all types of repairs, weekdays 8:00 am – 5:00 pm. Specialist in axle repairs, including for caravans. Large selection of rental trailers. We also have a large range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come by in person. Lrodpfxsrk Iu Ej An Iep

Condition: used, Year of construction: 2010, (1) Injection molding machine, Handling: Wittmann | W832-0185 | 2010 Lsdsy N R Tyepfx An Ierp Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling System 1x Conveyor Belt 1x Hopper Dryer, company TORO-systems 1x external Hot Runner Unit, company Mold Masters 1x Conveyor Unit, company Motan

Condition: good (used), Parts shown by picture not come. Lrsdjzlbwxspfx An Ijp

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, serial number 281117, unused in original packaging, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Lsdpfx Anji Eab Se Iorp

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, serial no. 287832, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Lrodpsi Eacaofx An Isp

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component You can find more great Arburg machines on our website: maschinen-handel.eu 78,099 hours, automatic Injection unit 1, horizontal, 290 mm diameter, 25 mm max, 71 cm³ Injection unit 2, vertical, 70 mm diameter, 18 mm max, 21 cm³ Opening stroke 925 mm Electric rotary indexing 12-zone hot runner system integrated 3 x core pull 2 x blow-out (control for needle gate) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6 kg: 2 x vacuum 5 x double-acting grippers Z-axis servo 800 mm C, G, X, and B axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) We at Maschinen-Handel offer a commissioning guarantee for every machine purchased from us, as well as ensuring that the machine is commissioned by the manufacturer. In this way, we offer you, as a customer, maximum security in the used machine market. Lrsdpjx A Dy Rsfx An Iep Important note!!! Due to recent developments – tax information and advantages for used machines From July 1, 2025, used machines can also be taken into account for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E)

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Lrodpfxsznbgfs An Iop Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw band: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw frame swivels up to 45° - With 2 saw band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile material, and solid material made of stainless steel, iron, etc. Lodpfeilk H Tex An Ierp - Generously sized saw arm for vibration-free operation - Lowering of the saw arm via hydraulic lowering cylinder - Low noise due to robust design - Shut-off after cut completion via micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation, and German service Scope of delivery: - Bi-metal saw band 2080 x 20 x 0.9 mm, 6/10 teeth per inch - Band tension adjustable via manometer - Quick-release vise - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic end shut-off after cut completion - Base frame

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° Lredpfx Aszd Hgien Iep turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, SN: R 237633, unused, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Ledpex Erqlefx An Ijrp

Condition: new, GMN TTSV 170 S - 12000 / 18 A high-speed spindle, SN:R 287831, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lsdex Dwqlepfx An Ijrp

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Lrjdpfozg Iq Iex An Iop

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). Lrsdpfxeyf Ha Ho An Isp #Tags: ARBURG | Multi 3K | 630S

Condition: used, mileage: 5,000 km, power: 38 kW (51.67 HP), first registration: 06/1951, fuel type: gasoline, color: red, gearing type: mechanical, number of seats: 5, Classic vehicle The vehicle has been fully restored Additional photos can be sent upon request Lrsdpfx Anoy Ab T Ds Ijp The vehicle is in good condition Private sale Further information available on request

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections Lrjdpsyxdwdofx An Iop • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Year of construction: 2020, condition: ready for operation (used), A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible. Lrjdpfsy Hvqljx An Iep

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control Lsdpsx Nkp Isfx An Isrp • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Ledjxzix Aepfx An Iorp Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Min. mold height: 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Lredpfx Anow Suy Is Iep Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Conveyor belt "16"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Lodpfxjw Su A Ns An Ierp Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160

Condition: new, Ostas 3-roll round bending machine SMR-S 1570 x 170 Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll 2 x digital display Lodpfxsiw D Smj An Isrp Sheet metal width 1570 mm Sheet metal thickness 8.0 mm max. Sheet metal thickness 7.0 mm for pre-bending Roll length 1570 mm Smallest diameter 255 mm Roll diameter 170 mm Weight 1960 kg Dimensions L-W-H 3200 x 920 x 1260 mm Motor 5.5 KW Equipment: Top and bottom rolls driven electrically Top roll can be swiveled out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, - Capacity: 2070 x 6 mm - Electrically adjustable nip roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement Lrsdolht N Iopfx An Isp - Digital display for bottom roller movement (material clamping) - Hardened rollers - Tapered rollers - Rotatable top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4 geared motor with a three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The technical condition is very good, and it shows normal signs of use, with some localized paint wear on the fan cover. The robust worm gear ensures quiet operation and reliability, making this geared motor ideal for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. Lredpfx Ajznv Dljn Isp Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4 Power: 0.37 kW Power supply: 3×220/380 V, 50 Hz Motor speed: 1380 rpm Output speed: 67 rpm Output torque: 39 Nm Design: B5/A Protection class: IP54 Insulation class: B Weight: 13.69 kg

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW Lrsdpfozab A Sox An Iep - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)