Used Sack & Kiesselbach Ep 630 for sale (4,264)

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm stroke: max. 310 mm weight: 3.700 Kg. Dedsyylhajpfx Abzoch

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm Djdsgwv S Uspfx Abzoch stroke: max. 275 mm weight: 4.500 Kg.

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Dodpfx Abswxw Amozjch Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 Dcedpfx Aeul U Svjbzoh serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm Dcedpfx Ajwuutbebzsh width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Dcsdswxw H Espfx Abzeh Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm Dedpjxvdr Hsfx Abzoch stroke 310 mm weight of the machine ca. 3500 t

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm table size: 0/ 700 mm Location: In our warehouse Dedpswi Tdbofx Abzsch

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Dcedpfx Abegtty Tjzsh Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Dcodpfx Abshtaaqjzsh Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Dcsdpfx Aohfwqzsbzoh Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance Dcodoxy Nt Rjpfx Abzoh - Suitable for medium to heavy-duty conveying tasks

Year of construction: 2011, condition: used, Compressor design: reciprocating piston compressor Tank volume: 250 liters Pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 410 l/min Engine speed: 1500 rpm Djdpfsy Ern Dex Abzech Condensate drain: mechanical Approximate weight: 166 kg Storage location:

Year of construction: 1998, condition: used, Used machine Dodpeyyfkhefx Abzoch Year of manufacture: 1998 Equipment and technical data: - Max. operating overpressure: 10 bar - Compressed air tank: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical intake volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1450 rpm - Oil quantity: 1.2 l - Oil refill quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Control: direct start Weight: 240 kg Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine Dcedpfx Absyfq Alozjh • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Dcsdpfx Aorgw Exsbzeh Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) Dcedowypqropfx Abzeh - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: excellent (used), Professional hydraulic set from the renowned German manufacturer LUKAS Hydraulik GmbH, designed for technical rescue operations and industrial applications. Condition: - Used, fully functional and tested equipment - Shows normal signs of use Dcedpfjyxr I Djx Abzoh - Good technical condition – ready for operation - Visible signs of wear on the housing (do not affect performance) Technical data: - Manufacturer: LUKAS Hydraulik GmbH (Germany) - Set type: hydraulic rescue set - Working pressure: up to 630 BAR - Power supply: 230V (single phase) - Standard: DIN 14751 Included in the set: - LUKAS hydraulic pump - Hydraulic cutter - Hydraulic spreader - Hydraulic hoses - Hose/cable reel - Quick couplings - Transport frame Application: - Road rescue (volunteer/professional fire departments) - Rescue and technical operations - Industrial and demolition work - Cutting and spreading of steel structures Advantages: - Robust German LUKAS quality - Very high operating force (up to 630 BAR) - Complete set – ready for use - Mobile design with hose reel

Condition: excellent (used), Year of construction: 2022, operating hours: 139 h, lifting height: 4,800 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, Weights Empty weight: 3.140 kg Functional Lifting capacity: 1.800 kg Maximum passing height: 220 cm Condition Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Fork carriage: Sideshifter Transport dimensions (LxWxH): 2,1x1,1x2,15 Latest inspection: 2024-06-14 Dcedpfowylcqsx Abzsh Charger current: 150 Production country: CN Additional information Please contact Vink Machinery for more information = Additional options and accessories = - 4th valve - Battery charger - Pneumatic shaped solids = Remarks = EP EFL 181 Forklift * 2022 * 139 operating hours * Battery-powered * Internal 230-volt charger * 48V/150 Ah Lithium-ion battery * Side-shift and 4th function up to the fork carriage * Triplex mast with free lift * Lifting height 4.8 meters * Side-shift and 4th function up to the fork carriage * Solid rubber tires * 4th function up to the fork carriage * 1800 kg lifting capacity * 3140 kg net weight

Condition: used, Electric forklift, EP type EFXZ-301-H - Li-Ion Front forklift, electric forklift Year of manufacture: 2026 Rated load capacity: 3000 kg Load capacity at 500 mm load center: 3000 kg Load capacity at 600 mm load center: 2700 kg Load capacity at 700 mm load center: 2500 kg Lifting height: 4800 mm Overall height: 2300 mm (container compatible) Mast height: 2300 mm Free lift: approx. 1600 mm Fork length: 1150 mm Fork width: 120 mm Fork thickness: 40 mm Fork carrier width: 1150 mm Operating voltage: 80 Volt - 4-wheel superelastic, solid rubber tires - front 23x9-10 / rear 18x7-8 - Hydraulic power steering Dcedpfszay A Djx Abzeh - Triplex free-lift mast - Side shifter - Operator protection roof - Drive battery Li-Ion, 80 Volt, 280 AH - Automatic charger installed with mains connection 230 Volt - LED lighting front and rear - According to operating hour meter, 10 operating hours - New TÜV inspection UVV (surcharge 150 EUR net) Length without forks: approx. 2550 mm Overall width: 1225 mm Weight with battery: 4600 kg New - unused, manufactured in 03-2026

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Dedpfx Abou Nfmajzoch Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered Dcjdpfx Asy S Af Tobzeh – bottom: adjustable rollers in lower table: 2 pcs motor: 7kW variable feed speed control Dimensions (LxWxH): 1800x1250x1150mm weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control – Used thickness planer in very good condition Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: excellent (used), Year of construction: 2021, operating hours: 766 h, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, total height: 2,460 mm, total length: 4,500 mm, total width: 1,430 mm, color: other, Empty weight: 8.080 kg Lifting capacity: 5.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Freelift - LED-lighting - Non marking tires - Side shift - Work lamp(s) = Remarks = General Dcjdpfx Asx U Eqkebzjh Country of production: China Condition CE type: CE Fork positioner and side shift, lithium battery with charger, closed cabin

Condition: excellent (used), Year of construction: 2022, operating hours: 178 h, lifting height: 4,800 mm, fuel type: gas, mast type: triplex, power: 37 kW (50.31 HP), total height: 2,220 mm, total length: 2,850 mm, total width: 1,200 mm, color: other, Torque: 176 Nm Number of cylinders: 4 Empty weight: 4.750 kg Dodoyhwbyjpfx Abzoch Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Freelift - Side shift - Work lamp(s) = Remarks = General Country of production: China Condition CE type: CE

Condition: excellent (used), Year of construction: 2022, operating hours: 205 h, lifting height: 4,800 mm, fuel type: gas, mast type: triplex, total height: 2,230 mm, total length: 2,900 mm, total width: 1,200 mm, color: other, Empty weight: 4.750 kg Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Dodpfx Aex U Ep Tebzsch Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Freelift - Side shift - Work lamp(s) = Remarks = General Country of production: China Condition CE type: CE