Used Scheugenpflug A280 2K for sale (904)

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Tjdpfx Aboif Ug Eotjb

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Tjdpfx Aozc Npljbtob Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Tedpfxjvnrz Dj Abtjb

Year of construction: 2023, condition: ready for operation (used), A Scheugenpflug material preparation and feeding unit is available. Two-component Scheugenpflug LiquiPrep LP804 20/20 machine, year of manufacture: 2023, tank volume: 50l/20l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, weight: approx. 430kg, operating hours: 0h. The machine is as new and still in its original packaging. Documentation available. An on-site inspection is possible. Tedpfxezkvk Rs Abtob

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Todpfx Aotp Df Hsbtsb Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. A needle cleaning and measuring station is included. The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Tsdpfx Ajua Acqobtsb Inlet and outlet buffers are no longer included—they are shown for understanding only. / years, not used in the last 2 years due to change of product line.

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW Todszvmihepfx Abtjb • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Todpfjw Dd Rzex Abtsb Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 Todpfx Ajxzix Aobteb • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Tjdpfx Aezb I Spjbtjb Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Tedpow D R N Refx Abtob

Condition: good (used), Year of construction: 2022, Labeling machine with maximum label width of 120 mm, suitable for plain packages and tags, 2 label dispensers, speed 60 m/min. Tsdsx Rp E Ropfx Abtjb

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. Tjdjyzumzepfx Abtob We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: used, Year of construction: 2017, Descrewer / Decorker, make Rink, type: KM 740/2K, as crate-descrewer/-decorker, 2-head for screw cap 0,5 lt NRW in 20-bottle module crate, and 1 head for crown cap, built 2017 Tsdpfx Aey Iz Aisbtjb

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Tsdpfx Aexyk Snebteb

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side Tjdpfxjyf Uy Ue Abtsb BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, functionality: fully functional, clamping force: 200 kN, For sale is an injection molding machine of the brand KraussMaffei and the type KM 200-220/220 CZ Multinject The machine is in a fully functional and well-maintained condition Technical data Year of construction: 2007 Clamping force: 200 t Aggregates: 2 Automatic hours: 47 963 Dimensions: 5200*2200*2700 mm Weight: 11,500 kg Further technical data will follow shortly Tjdpfxsrvimbj Abtob Offer refers only to the machine, the peripherals shown in the pictures are not part of the offer On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2016, condition: good (used), functionality: fully functional, For sale: a fully functional hammer mill, brand ROBEX - DPH22KRL, with a belt conveyor. Year of manufacture: 2016. Mill motor power: 22 kW. Tsdpfszwwvhsx Abteb If interested, please provide your contact details in your inquiry.

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Tsdpfx Ajyn N Apobtsb

Condition: used, mileage: 1,65,701 km, power: 370 kW (503.06 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 15,500 kg, maximum load weight: 10,500 kg, tire size: 315 / 80 R 22.5 / 11mm, next inspection (TÜV): 04/2026, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 3, total width: 25,500 mm, front tire size: 315 / 80 R 22.5 / 11mm, operation weight: 26,000 kg, Equipment: air conditioning,

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company Tjdpfx Aszk A H Ejbteb 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Year of construction: 2022, condition: used, Technical data Weights and dimensions Length (without swivel arm) 1.500 mm Width (without swivel arm) 1.000 mm Height (with swivel arm) 2.500 mm Weight without drums with drums ca. 750 kg ca. 1.080 kg Ratings/Power Electrical supply 3-phase 400V / 50 Hz / 16 A Power drawn 3,500 Watt Tsdpsyni Tzjfx Abtob Air pressure (max.) 6 bar (dry air) Hydraulic pressure < 150 bar Material pressure < 345 bar Noise level < 72 dB (A)

Condition: used, Year of construction: 2008, miter ja cooling ja Tsdpfxoyacp To Abtjb weight of the machine ca. 400 kg

Condition: used, mileage: 5,23,959 km, power: 350 kW (475.87 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), soot filter, Equipment: * Body/Superstructure: LOF semi-trailer tractor unit, * Cab: M ClassicSpace, * Cab: Width 2.30 m, * HAD 4x4 Hydraulic Auxiliary Drive, * Driver's seat: Comfort suspension seat, * External sun visor, * Alloy wheels, * Auxiliary drive MB 131-2c, * Transmission: 12-speed - Type: G 281-12, * Fuel tank: 290 liters, steel, * 2-circuit hydraulic system Technical features: * Audio system: Radio (Bluetooth), * Illuminated Mercedes star, * Rotating beacon, left/right, * Electrically adjustable and heated exterior mirrors, * Additional headlights Safety/Environment: * Retarder, * ABS/ASR * Rear axle differential lock, * Emission standard EURO 6, Other: * Suspension: Leaf spring / Air suspension, * Engine 12.8 liters - 350 kW R6 Diesel (OM 471), * Wheelbase 3600 mm, * Permissible total weight 18.00 t * LOF approval 90 km/h * COC document available, Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. The Behnke Commercial Vehicle Center continuously offers approximately 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Tjdozwrthspfx Abteb Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Tjdpfozwk H Hex Abteb Manufacturer: Graco Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions.