Used Schneider Am-B-11-10-500 Xbdk for sale (76,809)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Weight 451 kg Total power requirement 11 kw Isdoyt R N Uopfx Ahnstl

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider screw compressor 4152009631 - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing Itsdpfx Ahsziukyonel - Integrated direction of rotation control The machine was purchased as a replacement unit in 2020 and is new and has not been used to date. The machine has never been used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Weight 426 kg Ijdpfx Ahjvz Eklenjtl Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Itodpfx Ahovz Ez Dsnel Weight 431 kg Total power requirement 7,5 kw

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Ijdpovmivcsfx Ahnstl Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement. Iodpfez Ah Uxsx Ahnetl

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Good condition Iedpfx Aeybbczohnjtl Price ex location Transport available at extra cost!

Condition: used, No. 04499 Screw compressor Schneider AM K 15-10 Used Motor power 15 kW Actual air flow rate 120 m3/h Pressure max. 10 bar Volume flow 2000 l/min Sound pressure level 65 dB(A) Electronic control unit AIRBASIC 2 Technical documentation available Transport dimensions approx. 1200 x 800 x 1500 mm LWH Weight approx. 500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Itedpfexqhfmox Ahnsl Terms of delivery: ex warehouse

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Isdpfjy Dp Swjx Ahnjtl Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Condition: used, functionality: unexamined, Combination steam oven Eloma Multimax B 10-11 model Baking function, hot air and steam 11 GN 1/1 trays Isdpfxovktcbj Ahnetl Stainless steel design Connection: 400V, 17.1 kW, 32A CEE plug Dimensions approx.: 925 x 810 x 850 mm, WxDxH Used equipment Delivery service available Many more machines in stock!

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. Itedpfeyua Amox Ahnjl The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: used, Year of construction: 1999, functionality: fully functional, 5 MVA oil-filled transformer, manufacturer Schneider, year of construction 1999, 20 ± 5% / 10 kV, connection group Yy0; was in operation until 07/2026. Equipped with an expansion tank, Buchholz relay, air dehumidifier, and dial thermometer. Itjdozr Ur Aopfx Ahnel

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine Iodpfx Ahew Ah Nrsnstl - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: good (used), Year of construction: 2007, MANUFACTURER: SCHNEIDER Ijdpfx Aoyk U Hfjhnstl MODEL: AM55-10B1 SERIAL NO.: 08BA15723001 YEAR: 2007 POWER (kW): 55 CAPACITY (m3/min): 8.2 PRESSURE (bar): 10

Condition: good (used), Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, total width: 600 mm, total height: 150 mm, total length: 1,870 mm, conveying length: 1,870 mm, construction width: 600 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 60 kg, empty load weight: 60 kg, Manufacturer: Heber Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 1,870 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor length in mm: 1,870 Conveyor width in mm: 500 Conveyor height in mm: 150 Roller pitch in mm: 80 Support roller axle type: Steel – bolted Isdpfxjz Dikno Ahnstl Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Motor type: Motorised roller Motor manufacturer: Interroll Motor specifications: 24 V / EC310 / 0.05 – 0.98 Conveyor speed in m/s: 0.6 Net weight in kg: 60 Condition: second-hand / fully functional Functional test: OK

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipment includes all safety fittings and an electrical connection cable with plug and Condor pressure switch Compressed air tank equipped with a safety valve, tank pressure gauge, and condensate drain valve The welded-on rear handle improves loading and transport capabilities Fully automatic operation via a pressure switch with start-up relief, motor protection, and on/off switch Featuring enhanced equipment for universal use Itjdpfobyhvrjx Ahnol With V-belt drive, 2 cylinders in an in-line arrangement for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – this protects the compressor components, reduces noise levels, and minimizes vibrations Large fan impeller for optimal cooling Including filter pressure regulator for regulated compressed air that is free of condensate, dirt, and oil With a 2 m device connection cable with rubber sheathing and an air outlet via a quick-release coupling Device connection cable with phase inverter 10-year warranty on the tank against rust Technical data Pressure: 10 bar Intake capacity: 510 l/min Delivery capacity: 390 l/min Speed: 1240 min-1 Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: In stock at Bitburg warehouse Subject to prior sale.

Condition: new, color: red, driver cabin: other, gearing type: other, Vehicle location: en route/in transit, emergency stop, foldable, radio remote control Superstructure: Fassi F 110 B 2.22 Dynamic, at 7.8 m – 980 kg, radio-controlled load chart, max. 5,400 kg, at 4 m – 2,200 kg, 7.8 m – 980 kg, new crane from year of manufacture 2022, additional hydraulics only for swivel servo, the crane is intended for stationary mounting, swivel range 410°, all hydraulic cylinders are double-acting, piston rods are hard-chrome plated, double-knee lever system with PROLINK (overextending boom arm up to 15°), electronic overload cut-off device with FX500, emergency stop, and optical alarm (90% and 100%), pressure relief and load holding valves, control block with 4 control valves, operable from both sides Isdpfx Ahjzv Spasnetl separate hydraulic tank (90 l) with filter, mounted on the crane base, standard color RAL 3020 traffic red, load hook and fastening lugs (short / 500 mm), data subject to change as the crane is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Iodpjw Ni Ibefx Ahnetl

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Isdpjzlivpsfx Ahnetl Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Iedpfx Ahozh Nnwonstl Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: ready for operation (used), Balluff Micropulse BTL06WT / BTL7-A110-M0500-B-S32 linear displacement sensor - HU, used, good condition, 100% functional, scope of delivery as per photos Itodpemz Ectjfx Ahnel

Condition: ready for operation (used), Fanuc A06B-6114-H109 servo amplifier module, version: B V02405480, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfx Aoi D Uyxohnetl

Condition: new, Year of construction: 2026, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating Iodpfjxbzbpex Ahnjtl

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel, with a working and maximum allowable pressure of 11 bar, is designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. The tank is made of galvanized steel sheet, providing an excellent protective barrier against external factors and corrosion and significantly extending the service life of the unit compared with standard painted tanks. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Galvanized Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Galvanized finish – the tank surface is galvanized, providing an attractive appearance and high resistance to demanding conditions in workshops and production halls. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality construction – durable galvanized external coating provides long-lasting protection. Itsdpfx Aezwlzfjhnel Space-saving vertical design – allows efficient use of available space in the workplace. Compliance with standards – the tank meets pressure equipment safety requirements and is suitable for registration with the Polish Office of Technical Inspection (UDT). Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a galvanized coating resistant to external factors and corrosion. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 130 kg Number of connections 6 Connection sizes 1 1/4", 2", 1/2" Dimensions 2030 × 600 mm Tank capacity 500 L Working pressure 11 bar Maximum pressure 11 bar Wall thickness 4 mm Diameter Ø 600 mm Height 2030 mm

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Itjdpfx Ahey H Evkonel