Used Schunk Dpg 100 Parralelgreifer Sn: 370253 + Dpg 100/1 Und Dpg 100/1 S -Ungebr.- for sale (1,10,468)

Condition: new, SCHUNK DPG 100 parallel gripper, serial number: 370253 + accompanying documents DPG 100/1 and DPG 100/1 S, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Codpfxszd I Eyo Ai Sorh

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm Csdpfxjlqac Sj Ai Serh the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 − Year of manufacture: 08/2017 − Technical data: > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Single-lever operation/ball valve > Tank change: manual Cjdsxt H Ilspfx Ai Ssrh

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) Cjdpfsxwvruex Ai Ssrh - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: ready for operation (used), Schunk Gemotec CLM 200-H100 compact slide SN: MK116609,used, normal traces of use, 100% functional, scope of delivery according to photos Cedpfjmz Ecwsx Ai Ssrh

Condition: new, Schunk KSH 100-Z 2-jaw power clamping block, max. operating pressure 60 bar, unused in opened original packaging, 100% functional, scope of delivery as per photos. Cedpfx Aex Eucwji Serh

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Machine is unused and in its original packaging. Crodpfx Ajz Egy Asi Sjh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm Crsdpoz Ef N Aofx Ai Soh - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: new, Schunk SRU+ 40-W / 30052464 Universal swivel unit + 2 x PZN+ 100-1 / 303312 Universal gripper + SGE / 30077266 + 6 x BSWS-B 100 / 303027 quick-change jaw system, unused, 100% functional, scope of delivery as shown in the photos. Crjdpfx Aioi Ec Nko Sjh

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Crodeyc T Apjpfx Ai Ssh Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: new, Schunk OPR-176-P00-S collision and overload protection, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Cjdpfx Aji Ec I Aoi Sjrh

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Crsdpfx Aijy Uvk Io Sjh Make: SCHUNK Type: KONTEC KSG 100 Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 Codpfx Aieywuihj Sorh - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: ready for operation (used), Grundig VIC30 AES 1 0.881.952-0 card SN 6861011, used, normal signs of wear, 100% functional, scope of delivery as per photos. Crodpfx Aox Erqroi Sjh

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Crjdpfx Aieu H R Iwo Soh Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: ready for operation (used), Schunk GFS 25-180 universal swivel finger 355510 + INA HK2516-2RS needle bearing, used, good condition, 100% functional, delivery as per photos. Csdpfex Eucqox Ai Ssrh

Condition: ready for operation (used), Festo EMMS-AS-100-S-HS-RMB 550125 servo motor, serial number J8N4265, used, in good condition, 100% functional, scope of delivery as shown in the photos. Crjdpfszzuqdjx Ai Soh

Condition: new, Elau SX-1/22/1/0/8 m FB1 SV 5.13 L1 Card Id. 11130135 SN:911297.0010, unused in opened original packaging, 100% functional, scope of delivery as per photos Cedpfx Aev E Tuaei Ssrh

Condition: new, Mitsubishi HA200NC-S servo motor SN 6Y159 + encoder OSA104 SN J4AVP3WYD6P,unused with signs of storage, 100% functional, scope of delivery as per photos Csdpfxsrb S Unj Ai Serh

Condition: new, Mitsubishi HA200NC-S servo motor SN 73052 + encoder OSA104 SN J4AVP3X337L, unused with signs of storage, 100% functional, scope of delivery as per photos Crsdpforb S Uvex Ai Seh

Condition: new, Mitsubishi HA200NC-S servo motor SN 7X252 + encoder OSA104 SN J4AVP3XXG5J,unused with traces of storage, 100% functional, scope of delivery as per photos Crederb Taaspfx Ai Sjh

Condition: new, Mitsubishi HA200NC-S servo motor SN 32008 + encoder OSA104 SN J4AVP3X5E0S, unused with signs of storage, 100% functional, scope of delivery as per photos Crsdpfx Ajrb S T Roi Seh

Condition: new, Mitsubishi HA200NC-S servo motor SN 71092 + encoder OSA104 SN J4AVP3X1875, unused with signs of storage, 100% functional, scope of delivery as per photos Cjdpfxsrb S Urj Ai Serh

Condition: new, Mitsubishi HA300NCB-S SPECK NO 78001 + Encoder OSA104 SN J4AVP3X7234, unused with signs of storage, 100% functional, scope of delivery as per photos Crsdjqx Dfajpfx Ai Soh

Condition: new, Mitsubishi HA300NCB-S SPECK NO 84017 + Encoder OSA104 SN J4AVP403AW, unused with signs of storage, 100% functional, scope of delivery as per photos Crjdpfx Aoqx Dfdji Soh