Used Scm Edge Banders Scm Stefani Md 2019 for sale (7,366)

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AH00001546, functionality: fully functional, operating hours: 6,898 h, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 22 m/min, actuation type: electric, total length: 7,000 mm, overall weight: 3,121 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, INTERIOR 46 DESIGN Ltd. – Ruse offers for sale: SCM – Stefani MD straight-edge edging machine – manufactured in 2019. The machine was purchased new and used for 5 years in the production of custom-made kitchens. In perfect technical condition. Fully serviced and maintained by SCM Bulgaria. The machine is located in the SCM showroom in Varna. Inspection and testing on-site are possible. Predpfszki Dksx Airoc

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Prodszc Ilxjpfx Airjc

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit Predpfx Aozug Sgjiroc • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: used, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Year of manufacture: 2011 Colour: Grey Weight: 3.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Prodpeyudwzefx Airoc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E Pedpfx Aisz Aquhjrsrc CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various Prsdpfxewlzz Tj Airec XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, edge thickness (max.): 25 mm, height adjustment type: pneumatic, actuation type: electric, total height: 1,950 mm, total length: 8,000 mm, total width: 1,300 mm, overall weight: 7,500 kg, This high-performance SCM Stefani Solution XD is engineered for high-volume multi-shift industrial manufacturing, delivering continuous accuracy and a flawless edge finish even on the most sensitive high-gloss or thin-film materials. Equipped with a solid monolithic structure and advanced NC electronic touch controls, this specific 4-cabinet configuration maximizes stability and houses a comprehensive setup of high-end processing aggregates. Manufacturer: SCM Group (Italy) Model: Stefani Solution XD Configuration: Right-Hand Feeding Condition: Excellent, Fully Operational Location: Plovdiv, Bulgaria Prodszcccrepfx Airjc Availability: Immediate Estimated Footprint & Shipping Dimensions Total Machine Length: Approx 8,000 mm Total Transport Length: Approx. 8,300 mm (including extended infeed guides) Machine Width: Approx. 1,300 mm (transport width with side panel supports retracted) Machine Height: Approx. 1,950 mm (with safety hoods closed) Estimated Operating Weight: 7,500 kg Technical Specifications Feed Speed: Up to 25 – 30 m/min (NC-controlled variable track speed) Panel Thickness Capacity: 8 mm to 60 mm Edgeband Thickness Capacity: 0.3 mm to 22 mm Max Coiled Edge Capacity: 3 mm Actuation Type: Pneumatic & Multi-Axis Electronic Servo Motors Height Adjustment: NC-Motorized Automatic Top Belt Pressure Beam Pneumatic Requirement: 6 bar Control System Software: Maestro Pro-Edge / Active Edge Interface Premium Installed Working Units (Aggregates) This machine features a robust multi-station arrangement with a multi-hose high-efficiency central dust extraction layout: Pre-Milling Unit: High-capacity dual cutter block layout utilizing Hydro-Lock tool connections to guarantee zero vibration during panel edge squaring. Advanced Gluing Station (VC-600): Plasma-treated glue pot capable of rapid EVA and PUR hot-melt changes, backed by rapid pre-melting technology. End-Trimming & Fine Trimming Units: Rigid, low-inertia dynamic structures built to ensure zero scoring on fragile surfaces. Round 4 Corner-Rounding Unit: Multi-axis 4-motor high-speed profile rounding unit processing at up to 30 m/min. Finishing Stations: Multi-edge profiling scrapers, glue scrapers, and motorized buffing units for an out-of-the-box clean edge. Automated Axis Positioning: Complete machine changeovers happen in minutes directly from the touchscreen console, maximizing uptime. Top Track Pressure Belt System: Secures fragile components far better than traditional small-wheel setups to keep protective films pristine. Energy Management Built-In: Programmed with the SAVENERGY system to reduce plant power consumption during cycle idle times.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt Prsdpfx Asz Nyp Heirsc In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Podpfox Nv S Ujx Airorc Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Podpfx Aozuykpoirorc Type: Minimax E10 Year of manufacture: 2019 Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,500 mm, total length: 3,200 mm, total width: 1,100 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, – Made in Italy – Year of manufacture: 2018 – Preliminary milling – Technical documentation, CE marking TECHNICAL SPECIFICATIONS: – Edge thickness: 0.5 - 3 mm – Wood veneer thickness: 0.5 - 5 mm – Element height: 8 - 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed rate: 7 m/min – Operating temperature: 190° - 220° – Preliminary milling – Glue application roller – Guillotine for preliminary edge trimming – Saws for final edge trimming (front/rear) – Milling (top/bottom) – Radius edging – Straight edging – Polishing units – Air blow for each unit – Operating pressure: 6 - 8 bar – Table height from base: 900 mm – Nozzle diameter: 2x 60 mm and 2x 80 mm – Transport dimensions (L/W/H): 320 / 90 / 150 cm – Weight: ~650 kg Pedezzzr Ispfx Airjrc

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning Prsdperx S Ipefx Airsc - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2008, machine/vehicle number: AA/H113802, SECOND-HAND EDGE BANDER MACHINE SCM MOD. OLIMPIC 500K "T-E" - (CE) - Pre milling unit - Gluing unit with pre-melter Prsdpfx Aor Iynbjirsc - End trimming unit with double blade - Trimming unit - Edge scraping unit - Glue scraping unit - Brushing unit - Year 2008 (CE)

Condition: used, machine/vehicle number: 007113, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Prodorl Ur Topfx Airoc Corner Rounding Unit: yes Max feed speed: 22 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Year of manufacture: 2017 Colour: Grey - Details: Pedpfjyll Snjx Airerc - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, operating hours: 1,000 h, Edge bander SCM Stefani KD HP (High performance) Podpj Afdp Uefx Airjrc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) Prodj Afbuhepfx Airsc 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 Prodpfx Aiek Nk R Dersc SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: excellent (used), SCM K560 HP Edge Bander Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Pneumatic pre-trimming guillotine, Liquids Finished edge trimming knives Top-and-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edge trimming cutter (multi R1-R2), Liquids Flat edge trimming cutter, Polishing unit Psdpfozlta Ssx Airorc The machine has CNC control Max. workpiece height 60mm Max. veneer thickness in roll 3mm, Feed rate 12 and 18 m/min Inspection and testing possible on-site

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 239000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” Psdozwk Idspfx Airsrc 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds Prodpfx Aezinpcoirjc - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Pedpfotxtzkjx Airorc Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain Pedpfottakhsx Airerc - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm Pjdpfot Hal Dsx Airorc PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Year of construction: 2019, CNC machining center Manufacturer: SCM Type: Morbidelli M220 Year of manufacture: 2019 Technical data: Working area: 5,510 x 1,620 x 180 mm 15 kW liquid-cooled HSK-63F electric spindle Speed up to 24,000 rpm Prodpfx Aisz Hwkzjrjc Drilling head F29LTC: 17 vertical drilling spindles + 6 horizontal drilling units with dual output (3 in the X-direction, 2 in the Y-direction) Integrated saw blade in the X-direction TRB14 tool magazine with 11 positions FAST14 tool magazine with 14 positions Powerful vacuum clamping system TV FLEX work table Xilog Maestro CAD/CAM software Positioning accuracy up to 0.03 mm Travel speed up to 78 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.