Used Self-Dumping Hopper for sale (5,282)

Condition: used, New: Yes Kdodpfxjzvn A Nj Ahhsr Attachment suited for: Lifting equipment

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Kdodpfx Ahjy Urtfjhor Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Kodpfx Ahjzlpv Aohsdr Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Kdedpfx Ahsztq Hxjhjr Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² Kjdezba E Ijpfx Ahhjdr • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. The DUMPER XN800 is a compact and powerful tracked dumper equipped with a front loader and hydraulic discharge. The XN800 model has a load capacity of 800 kg. It can be safely operated on slopes up to 30 degrees. The robust steel loading box is ideal for various tasks, and the unit is equipped with a foldable platform. The XN800 model is the ideal equipment for the most demanding construction, electrical, sanitation, renovation, and service companies in related industries. We also provide equipment servicing after the warranty period. The wheelbarrows are manufactured under the supervision of European engineers. The equipment features a strong frame and can be used under all conditions. TECHNICAL DATA: Operating Weight: 630 kg Load Capacity: 800 kg Bucket Volume: 0.26 m³ Application: Self-loading and unloading ENGINE: Brand: KUBOTA (Diesel) Rated Power: 15 HP Max Torque: 23.8 Nm / 3000 rpm SPEED: Max Travel Speed: 4.1 km/h Min Travel Speed: 2.1 km/h Max Gradeability: 30% TRACKS: Ground Pressure: 21.2 kPa Material: Rubber Tension System: Bolt adjustment HYDRAULICS: Pump Type: Double gear pump Pressure: 16 MPa Flow Rate: 30 l/min TANK CAPACITIES: Hydraulic Oil Tank: 12.8 l Fuel Tank: 5.5 l DIMENSIONS: Wheelbase: 914 mm Track Length: 1230 mm Overall Length: 1795 mm Track Height: 320 mm Front Edge Height–Ground: 810 mm Maximum Dump Height: 1690 mm Platform Height–Ground: 355 mm Control Panel Height–Ground: 1005 mm Overall Height, Folded: 1060 mm Overall Width: 820 mm Track Width: 180 mm Bucket Width: 620 mm Max. Tipping Discharge Height: 1700 mm Max. Extended Machine Height: 2980 mm Kdedpfx Aeyk Spqjhhsr PRICE: €7,059 net €8,400 gross

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner granulators in the C’s series (“C” stands for “compact,” “s” for “silent,” i.e., noise-optimized) offer practical solutions for virtually all challenges associated with the in-line recycling of sprues and rejected parts during the production process. Thanks to their modular design, the C’s series granulators can be easily adapted to specific applications or operational requirements. Depending on the method of sprue feeding, the discharge of regrind, or the specific injection molding machine being used, the Wanner C’s series offers optimal solutions tailored to your workflow through a wide range of standard components. Optimized cutting geometry and low rotor speeds ensure high-quality regrind with minimal dust content, while sound-insulated feed hoppers and a grinding chamber design optimized to minimize structure-borne noise and vibration contribute to low noise levels. The generously sized gearbox ensures a long service life for the granulators while also allowing for extremely compact dimensions. The grinding chamber can be opened quickly and easily—saving time and costs, for example, during cleaning for color or material changes. Advantages of the C’s Series Easy adaptation to specific applications via a modular system Compact design requires minimal floor space next to the injection molding machine Solid cast/steel housing mounted on swivel casters Robust motor/gearbox unit for long service life Significantly reduced noise levels thanks to a staggered-cut rotor and a grinding chamber design optimized for vibration control. Easy operation and cleaning of the mill save time and costs Improved intake of bulky sprues and regrind parts due to optimal rotor geometry Grinding chamber with hardened inserts for minimal wear when processing glass-fiber reinforced material High-quality, low-dust regrind achieved through optimized cutting geometry. The co-rotating disc in the side wall reduces friction, thereby minimizing heat buildup and material degradation. Blades easily resharpened without special fixtures Sound-insulated feed hoppers with safety guards Technical Data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20–25 kg/h Screen perforation: 3–8 mm Voltage: 400 V / 50 Hz Collection bin volume: approx. 6 l Suitable for glass-fiber reinforced material (standard) Control system: Contactor control with overload protection switch Electrically redundant design with self-monitoring safety relay compliant with EN 12012 5 m power cable Weight: 155 kg Kjdpezc Nydjfx Ahhsdr Year of manufacture: 04/2019 Product video "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1991, - Dimensions: 1900x1680 mm - Maximum lifting capacity: 600 kg - Serial no.: 49779 - Year: 1991 - This lifter is designed to lift tanks and tip them into a hopper or weighing unit - Dumping heights and direction are variable according to the type of tanks and weighing units - Voltage: 380V - Power: 0.75 kW - Weight: 430 kg Isdcvyexnc T Hoqi Aebd - Overhauled equipment: The equipment is prepared upon order; lead times for collection and return are agreed at that time (please request price after overhaul) Kjdoxnc T Hepfx Ahhedr

Condition: used, Year of construction: 1994, type of input current: three-phase, Equipment: documentation/manual, I am offering a continuous-flow rotary mixer from Wöhr, available due to a company liquidation. Includes control system, sand hopper, and sand feeder. Spare blades for the mixing screw are also included. The machine is currently still connected and was operational until the company closed. Year of manufacture: 1994 Kjdpfozb Eh Uex Ahhedr Capacity: up to 5 t/h Siemens spare parts, as well as a laptop with software and memory chips, are included. 2 folders with documentation. For self-dismantling. More photos and details, as well as a viewing appointment, are available upon request. Please feel free to contact me via classified ads with your price offer. For self-dismantling. Dismantling can be organized for an additional cost. Sale ONLY to businesses. An invoice with VAT will be issued. Without warranty.

Condition: excellent (used), Year of construction: 2013, - Content: 68 + 7 HL - With vibrating beak - 3 side elevation of the hopper Kjdpfxsq Uk Rle Ahhodr - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Dump height : 1440 mm

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, only a few operating hours Equipment and technical data: Stationary clean-air filter system ECO JET DUO 6 XL ZRS for extracting wood dust and chips Fans: 2 × 7.5 kWAir volume: 10,000 m³/hNegative pressure: 2,700 Pa (total) / 2,200 Pa (static)80 filters à 2.50 m, BIA Category M, electrically conductive, incl. support cagesFilter area: 77.6 m²Filter surface loading: 129 m³/(m² × h)Filter cleaning: AL-KO OPTI-JET®Pressure relief area: 0.84 m² (bursting discs)Base frame with discharge hopper and rotary valve; dry discharge with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm intermediate section for increasing unit height with 2 suction openings Base frame with discharge hopper and ZRS 960/1 FG rotary valve for chip disposal via on-site transport fan into an existing silo or similar; DN 200 transport pipe, approx. 1,260 mm, connection on site ZRS 960/1 FG Rotary valve: ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (indoor/outdoor); EX D; FSA 11 ATEX 1614XMotor: 0.18 kW / 0.78 A, 3 Ph / 400 V / 50 HzProtection class: IP 54 / B3; Insulation class FSpeed: 41 rpm; Capacity: 15,744 l/h*; 7 cellsInlet/outlet: 960 × 250 / 960 × 208 mmDimensions: 1,100 × 605 × 330 mm; Temperature range: up to 50 °C Further equipment: 400 mm suction connection with non-return flap in rectangular ductECO JET backflow flap 910 × 346 × 500 mm AL-KO Control System ACS II: Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage and integrated frequency inverter for cascade control of 2 fans up to 37 kW Plain-text fault display with common fault lamp; manual discharge start via display button; manual cleaning start via push button; cleaning via differential pressure; post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval display; control cabinet lighting and ventilation; monitoring of fire damper, residual dust sensor, level sensor and max. filter pressure 10 individually controlled solenoid valves 4-group slide control for up to 8 machines: control via potential-free contact (PFK) or induction coil; 24 V DC motorised or electro-pneumatic slide gates; max. 4 panels per conveying line Power section ZRS up to 0.18 kW; time settings adjustable via touchscreen Bursting disc sensor and evaluation unit; pressure transmitter for inverter; pressure switches; warning beacon; 2 × PTC monitoring; rotary valve speed monitoring Exhaust/return air changeover 24 V DC for summer/winter operation Filter monitor/residual dust monitoring with evaluation unit according to DIN EN 12779 and H3: if 0.3 mg/m³ is exceeded, a self-latching alarm is triggered and the recirculation air damper automatically switches to exhaust air 10-way terminal box 24 V/230 V, fully wired for filter cleaning, incl. approx. 6 m cable Pipe system incl. bends, branches, reducers, PU hoses, machine connections, small parts and EP slide gates for extraction of 11 woodworking machines + 1 HRS according to specification Return air according to TRGS 553 with changeover damper and fire damper Galvanised base frame for container loading Paddle switch 24 V–230 V with socket for level indication in the discharge hopper Dimensions: 2,092 × 2,000 × 5,292 mm Inspection possible in assembled condition in 06667 Weißenfels. Price incl. dismantling. Kjdpfxjzlbqrs Ahhedr Availability: Short notice Location: ...

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Kdedpfx Ahoxcx Snoher Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Condition: used, Year of construction: 2020, operating hours: 521 h, Internal vehicle number: VTC30048 Available immediately. More information at: Luis Lucena Viktoria Sologubova Manitou MHT 10180 heavy-duty telehandler – 18-tonne lifting capacity – 521 operating hours Kodpfxsza Nq Rj Ahhedr High-performance Manitou MHT 10180 heavy-duty telehandler, manufactured in 2020, with just 521 operating hours. The machine offers a maximum lifting capacity of 18,000 kg, a lifting height of 9.63 m, and is equipped with a hydraulically adjustable fork carriage and pallet forks. Technical data: * Vehicle number: VTC30048 * Vehicle condition: Used machine * Category: Telehandler * Manufacturer: Manitou * Model: MHT 10180 * Series: 129M ST4 S1 * Year of manufacture: 01/2020 * Model year: 2020 * Operating hours: 521 hours * Maximum lifting capacity: 18,000 kg * Maximum lifting height: 9.63 m * Maximum reach: 5.56 m * Unladen weight with standard forks: 24,000 kg * Technical inspection: New * CE marking: Present Engine and drive: * Engine manufacturer: Mercedes-Benz * Engine type: OM 934 LA * Emission stage: Stage IV/Tier 4 Final * Cylinders: 4 * Displacement: 5,100 cm³ * Power: 129 kW (176 hp) * Maximum torque: 750 Nm at 1,600 rpm * Transmission: Hydrostatic * Forward/reverse gears: 2/2 * Maximum travel speed: 25 km/h * Traction force under load: 15,970 daN * All-wheel drive * All-wheel steering * Automatic negative parking brake * Hydraulic service brake Hydraulic system: * Variable hydraulic pump * Hydraulic flow rate: 205 l/min * Hydraulic pressure: 350 bar * Hydraulic oil tank: 290 liters * Hydraulically adjustable fork carriage Dimensions: * Overall length with implement carriage: 6.65 m * Overall width: 2.52 m * Overall height: 3.00 m * Wheelbase: 3.75 m * Ground clearance: 0.44 m * Turning radius (outer radius): approx. 5.50 m * Tilt angle: 12° * Dump angle: 105° Capacities: * Fuel tank: 315 liters * AdBlue tank: 63 liters * Hydraulic oil: 290 liters * Engine oil: 21 liters Cab and safety: Enclosed ROPS/FOPS cab, Level 2 Safety system according to EN 15000 JSM joystick control All-wheel steering Rotating beacon Work lights Cab protection grille Large-dimensioned off-road tires Noise level at the driver's seat: 80 dB(A) External noise level: 107 dB(A) Attachment: * Manufacturer: Manitou * Type: PFF + POS + DL * Serial number: 53010702 * Year of manufacture: 2019 * Self-weight: 1,900 kg * Rated lifting capacity: 14,000 kg * Load center: 1,200 mm * Hydraulically adjustable fork carriage * Pallet forks included Inspection and functional test possible by prior arrangement. Further information, photos, load charts, and videos are available upon request. Errors, changes, and prior sale reserved.

Condition: used, SPRB-SPRS Series 400 V three-phase power supply Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Dough capacity 250 kg Flour capacity 166 kg Bowl volume 390 L 2-speed spiral Spiral motor 6.5 / 11 kW Bowl motor 1.1 kW Automatic speed change Bowl rotation by pulses Bowl rotation direction reversal Hydraulic tilting Discharge into hopper or divider Stainless steel bowl Dimensions L × W × H 1800 × 1650 × 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Weight 1650 kg Year 2022 Used self-tilting dough mixer 160, capable of handling 250 kg of flour, SPRS250 General description The MECNOSUD SPRS250 is a large-capacity, self-tilting spiral dough mixer designed for bakeries, pastry shops, and production units that need to prepare up to 250 kg of dough per cycle. Its fixed 390-liter bowl can hold up to 166 kg of flour. This SPRS version is equipped with a hydraulic tilting mechanism that allows the dough to be discharged at height directly into the hopper of a divider or other production equipment. A mixer designed for large-scale production The SPRS250 combines a two-speed spiral, an independently motorized bowl, and two electronic timers. The operator can thus program the two phases of kneading separately, with an automatic transition from the first to the second speed. This arrangement facilitates the repeatability of recipes and limits interventions during the cycle. Key advantages Maximum dough capacity of 250 kg Up to 166 kg of flour Fixed 390-liter stainless steel bowl Two spiral speeds Two independent electronic timers Automatic transition between the two speeds Two independent motors for the bowl and the spiral Bowl rotation direction reversal Bowl rotation by pulses Hydraulic tilting, reducing manual handling Direct discharge into a hopper or divider Robust construction suitable for sustained production Detailed technical specifications Brand MECNOSUD Manufacturer's model SPRS250 Type of mixer Automatic spiral mixer with fixed bowl Discharge system Hydraulic tilting at height Maximum dough capacity 250 kg Maximum flour capacity 166 kg Bowl volume 390 L Kedpfx Ahozqd Iqshsdr Spiral speeds 2 speeds Spiral motor power 6.5 / 11 kW Bowl motor power 1.1 kW according to the manufacturer Motorization Two independent motors Cycle management Two electronic timers Bowl rotation Continuous, by pulses and reversible Transmission V-belts Bowl High-strength stainless steel Spiral High-strength stainless steel Central column Stainless steel Protective grill Stainless steel Unladen weight Approximately 1,650 kg Dimensions at rest Approximately 1800 x 1650 x 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Tilting footprint Approximately 2100 mm Data announced for this used unit Year 2022 Power supply 400 V three-phase Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Bowl capacity 84 L Discharge direction To the right Type of controls Electromechanical

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1442, power: 37 kW (50.31 HP), filling opening length: 1,300 mm, filling opening width: 1,350 mm, rotational speed (max.): 1,480 rpm, rotor width: 1,000 mm, TECHNICAL DETAILS Rotational speed: 1,480 rpm Opening width: 1,050 mm Opening length: 1,300 mm Rotor width: 1,000 mm Screen perforation: 20 mm Number of rotating knives: 26 pcs. Number of fixed knives: 36 pcs. MACHINE DETAILS Main motor power: 37 kW Power of hydraulic unit: 2.2 kW Oil tank capacity: 125 l Stroke of hydraulic cylinder: 1,000 mm Kodpfx Ahezuwthshsdr Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,800 x 3,0520 mm Weight: 5,000 kg Transport packages: 1 pc. EQUIPMENT Hydraulic cylinder

Year of construction: 1992, condition: ready for operation (used), An Ishida 14-head multihead weigher is available. Hopper volume: 3l, weighing range: 25g-1000g, max. volume for weighing: 4.5l/single dump, resolution: 0.2g, max. throughput: 90weighments/min, machine diameter: approx. 1360mm, height: approx. 1850mm, weight: approx. 500kg. An on-site inspection is possible. Kedpfozq Edaox Ahhodr

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. Kdsdpjx R N Urjfx Ahhjr The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: used, Year of construction: 2023, Drive PreTeC mulch coulter hydr. coulter pressure system SmartForce Distributor head f. / front hopper ISOBUS machine control Front-mounted hopper FTender 2200 / hopper cover filling auger FTender 1-fold conveyor line self-sufficient / ISOBUS machine control Kjdpfx Ahotp Hmrehjdr

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Ksdpfxszvlm Eo Ahhodr Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: used, mileage: 4,00,000 km, power: 338 kW (459.55 HP), first registration: 01/2008, fuel type: diesel, overall weight: 32,000 kg, gearing type: mechanical, emission class: euro5, loading space volume: 18 m³, Equipment: ABS, air conditioning, DAF CF 85.460 First registration: km 8x4 Leaf/Leaf suspension Manual transmission Carnehl tipper body Steel 19 cubic meters Tires 70-80% tread Brakes new ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski..... Goran Kedezvukgopfx Ahhjdr deutsch/english/p?????/?????..... Roman We will gladly take care of your financing or leasing needs. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 EUR Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 4,00,000 km, power: 338 kW (459.55 HP), first registration: 01/2008, fuel type: diesel, overall weight: 32,000 kg, gearing type: mechanical, emission class: euro5, loading space volume: 18 m³, Equipment: ABS, air conditioning, DAF CF 85.460 Registration: km 8x4 Leaf/Leaf Manual transmission Carnehl tipper body Steel 19 cubic meters Tires 70-80% remaining New brakes ---- Kdsdpfx Aszvukyohher Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian… Goran German/English/…? …? … Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 EUR Our services for you: - Customs registration - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System Kdjdpfjynhkfjx Ahher • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or standing • Any reproduction, reuse, publication, or copying of this offer is prohibited

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort Kodsvw R Ihjpfx Ahhjdr + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (60 - 740 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 30 - 370 grams (depending on dough) Kdjdpewyu Upofx Ahher Piston: 1 dough part piston (diameter 80 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt Kdodpfswyu Uvox Ahher - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph